• 한국재료학회지
• /
• 제4권4호
• /
• pp.445-452
• /
• 1994

가압 경수로 핵연료의 중성자 조사 조건에서 Zircaloy피복관의 3축방향으로의 변동거동은 집합도 계수에 따른 크립 이방성고 조사성장 이방성을 통하여 분석될 수 있다. 이러한 크립과 조사성장의 이방성이 Zircaloy피복관의 각 축방향 변형율에 미치는 영향을 평가할 수 있는 방법론이 제시되었다. 연소 후 측정된 KOFA Zircaloy-4피복관의 변형율과 핵연료 성능 분석 코드의예측치를 토대로 하여 각 축방향 변형율을 계산한 결과 KOFA Aircaloy-4 피복관의 원주방향 변형은 크립에 의해 주로 일어난 반면, 피복관의 길이방향 변형은 조사성장에 의하여 일어났으나 낮은 조사량에서는 크립의 영향도 상당히 큰것으로 나타났다.

• 에너지공학
• /
• 제21권4호
• /
• pp.362-372
• /
• 2012

원전의 증기발생기 전열관은 압력경계 부위로 결함발생으로 인한 누설 시 방사능물질을 함유한 1차 계통의 냉각수가 2차 계통으로 새어나와 발전소 및 대기를 오염시키게 된다. 근래에 전열관의 균열결함은 대개 응력 부식균열이며 전열관의 확관부위, 슬러지 침적부위 그리고 U-bend 등에서 발생한다. 확관부위 및 U-bend 등에서의 균열발생인자 중 가장 영향을 미치는 인자는 잔류응력이다. 폭발확관법이 적용된 한국표준형원전(OPR-1000)의 운전경험에 따르면, 증기발생기 전열관 확관부위에서 가동 초기부터 응력부식균열이 발생해 왔으며, 특히 원주방향 균열이 대량 발생하고 있다. 따라서 본 연구에서는 확관방법에 따른 잔류응력의 분포 및 상태를 비교하였으며, 특정 방향이 우세한 원인을 살펴보았다.

• Steel and Composite Structures
• /
• 제26권4호
• /
• pp.485-499
• /
• 2018

In this paper, a hollow steel tube (HST) shear connector is proposed for use in a slim-floor system. The HST welded to a perforated steel beam web and embedded in concrete slab. A total of 10 push-out tests were conducted under static loading to investigate the mechanical behavior of the proposed HST connector. The variables were the shapes (circular, square and rectangular) and sizes of hollow steel tubes, and the compressive strength of the concrete. The failure mode was recorded as: concrete slab compressive failure under the steel tube and concrete tensile splitting failure, where no failure occurred in the HST. Test results show that the square shape HST in filled via concrete strength 40 MPa carried the highest shear load value, showing three times more than the reference specimens. It also recorded less slip behavior, and less compressive failure mode in concrete underneath the square hollow connector in comparison with the circular and rectangular HST connectors in both concrete strengths. The rectangular HST shows a 20% higher shear resistance with a longer width in the load direction in comparison with that in the smaller dimension. The energy absorption capacity values showed 23% and 18% improvements with the square HST rather than a headed shear stud when embedded in concrete strengths of 25 MPa and 40 MPa, respectively. Moreover, an analytical method was proposed and predicts the shear resistance of the HST shear connectors with a standard deviation of 0.14 considering the shape and size of the connectors.

• 대한기계학회논문집B
• /
• 제25권4호
• /
• pp.540-545
• /
• 2001

Many previous researches on the premixed flame in a tube have treated the unsteady flame behaviors in which the shape, position and intensity of the flame varied, but more detail and fundamental research has been necessary. The flame stabilization condition in a tube, a unique steady state, and the unsteady behaviors, using the stabilization condition as an initial condition, were carried out in recent years. In this paper, propane-air premixed flame was stabilized in a tube and the flame behavior was observed when the mean velocity variation was imposed into the opposite direction of the initial mean velocity. The velocity variation is larger than the burning velocity and longer than the reaction time scale. During the period of the velocity variation flame is not extinguished. But after the period of the mean velocity variation the flame could be re-stabilized or be extinguished depending on the experimental conditions: equivalence ratio, period of velocity variation and magnitude of velocity variation. The extinction mechanisms were classified into the two cases, one is caused by the flame stretch in the shear layer near the wall, and the other is caused by the vortices and vortexes, which are generted by the acoustic waves.

• 대한기계학회논문집A
• /
• 제26권1호
• /
• pp.188-195
• /
• 2002

To investigate the degradation of mechanical properties induced mainly by neutron irradiation, the tensile tests were conducted from room temperature to 300\\`c using the irradiated and the unirradiated Zr-2.5Nb pressure tube materials. The irradiated longitudinal and transverse specimens were collected from the coolant inlet, middle, and outlet parts of M-11 tube which had been operated in Wolsung CANDU Unit-1 and exposed to different operating temperatures and irradiation fluences. The different tensile behavior was characterized not by the fluences of irradiation but by the tensile loading direction. The transverse specimen showed the higher strength and lower elongation than those of the longitudinal one. It was believed that these phenomena resulted from the microstructure anisotropy caused by the extrusion process. The increased strength hardening and decreased elongation embrittlement of the irradiated material were compard to those of the unirradiated one. While the tensile strength of the inlet was higher than that of the outlet, the elongation of the inlet was lower than that of outlet. Considering the operation condition, it was proposed that the operating temperature could be a more effective parameter than the irradiation fluence for long-time life. Through the TEM observation, it was found that while the a-type dislocation density was increased, the c-type dislocation was not changed in the irradiated. The fact that the higher dislocation density was sequentially distributed over the inlet, the middle, and the outlet parts was consistent with the distribution of the tensile strength.

• Structural Engineering and Mechanics
• /
• 제40권1호
• /
• pp.65-84
• /
• 2011

In this paper a simple mathematical model for approximate static analysis of combined system of framed tube, shear core and two outrigger-belt truss structures subjected to lateral loads is presented. In the proposed methodology, framed tube is modeled as a cantilevered beam with a box section and interaction between shear core and outrigger-belt truss system with framed tube is modeled using torsional springs placed at location of outrigger-belt truss; these torsional springs act in a direction opposite to rotation generated by lateral loads. The effect of shear lag on axial deformation in flange is quadratic and in web it is a cubic function of geometry. Here the total energy of the combined system is minimized with respect to lateral deflection and rotation in plane section. Solution of the resulting equilibrium equations yields the unknown coefficients of shear lag along with the stress and displacement distributions. The results of a numerical example, 50 storey building subjected to three different types of lateral loading obtained from SAP2000 are compared to those of the proposed method and the differences are found to be reasonable. The proposed method can be used during the preliminary design stages of a tall building and can provide a better understanding of the effects of various parameters on the overall structural behavior.

• 대한방사선기술학회지:방사선기술과학
• /
• 제35권2호
• /
• pp.103-107
• /
• 2012

본 연구는 어깨 통증을 호소하는 환자들 중 어깨충돌 증후군(SIS : Shoulder Impingement Syndrome)이 의심되어 진단을 위해 Y-view 검사가 필요하지만 몸이 불편하여 자세를 취하기 힘든 환자들을 위하여 편안하게 누운 자세에서 검사할 수 있는 modified Y-View를 고안하기 위해 연구를 실시하였다. 환자는 바로 누운 자세를 취하고 X선관(tube)의 각도를 내측으로 35도, 40도, 45도로 변화를 주어 검사한 영상을 비교 분석해 본 결과 X선관(tube)의 각도를 내측방향으로 40도를 주는 것이 견봉(acromion)과 쇄골(clavicle)의 공간(space), 오훼견봉궁(coracoacromial arch)의 모양을 잘 묘출 할 수 있어 진단에 가장 유용한 영상을 얻을 수 있었다. 따라서 환자가 Y-View 검사를 할 수 없을 경우, 이를 대체하기 위한 유용한 수단으로 modified Y-View를 활용할 수 있음을 알 수 있었다. 이 연구를 통하여 어깨충돌 증후군뿐만 아니라 견관절 질환에서의 다양한 적용을 기대해 본다.

• 한국의류산업학회지
• /
• 제23권1호
• /
• pp.44-56
• /
• 2021

This study analyzes the fashion video content of vegan YouTubers in order to understand how the vegan message is being conveyed in media. This study collected data with NoxInfluencer and conducted a case study of the vegan fashion YouTube content. We collected 143 videos for analysis as follows. The characteristics of vegan fashion content were divided into six categories. First, fashion know-how consisted of YouTubers' explanation on vegan fashion, from styling to where to buy vegan and fair trade products. Second, fashion haul content showed second hand products as well as certified vegan fashion products. Third, fashion daily life focused on a day in the life of a vegan YouTuber, casually showcasing fashion in real life. Fourth, fashion products reviews were about vegan YouTubers' thoughts and concerns about various vegan fashion brands and products. Fifth, fashion coordination category consisted of Lookbooks according to seasons. Last, the fashion entertainment category showed YouTubers challenging themselves to dress outside of their comfort zone. The content of the message was distinguished by consumption methods and aesthetic interaction. Also, vegan YouTubers were always anticipating the possibility of appealing to a wider demographic. This study differs from existing studies because it analyzed fashion YouTube content in order to understand the spread of a vegan message in the media environment. This study has its significance in suggesting the direction that the vegan community should take in delivering vegan messages in the future.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.202-205
• /
• 2004

This paper represents the role of pinna in localizing target direction. Specially, this paper described what is the role of right-side pinna versus left-side pinna. In this experiment, one side of the pinna function was distorted intentionally by inserting a short tube on the ear canal. The localization error caused by right and left side pinna distortion was investigated. Since a laser pointer showed much less error (0.5%) in localizing target position than FASTRAK (30%) that has been generally used, it was used for the pointing task. It was found that harmonic components were not essential for the auditory target localization, however, non-harmonic nearby frequency components were more important to localize target direction of sound. We have found that the right pinna is one of the most important functions in localizing target direction and pure tone with only one frequency component is confusing for localization.

• 한국분무공학회지
• /
• 제19권2호
• /
• pp.69-74
• /
• 2014

The comparison of the flow characteristics between circular and swirl jets which were controlled by the spinner attachment inside the airtube were conducted in this study. Swirl jet means a flow in whirls by mixing the flow of axial and tangential direction. Swirl flow has been used for the improvement of the combustion efficiency in the combustor. This flow is controlled by the spinner which has several vanes inclined by certain angles to the axial direction. In this study, angle of vane $30^{\circ}$ and diameter ratio of outlet to inlet of the airtube 0.73 were made. These spec. should find on the general gun type burner built in the domestic small size boiler. As the flow characteristics, axial and tangential velocities were measured by using the 2-D hot-wire velocimeter system and analyzed statistically. And also this research conducted a practical experiment considering to the attached belongings likes as ignitor, nozzle etc. on the airtube of the gun type burner. As a result, swirl occurred at the occasion of beingness and flow region extended considerably toward the radial direction. But effect of swirl did not transmit to the downstream. And the complicated flow was appeared regardless of the existence of spinner because of the effect of belongings.