• 제목/요약/키워드: Tube Furnace

검색결과 206건 처리시간 0.024초

가압하에서 인도네시아 아역청탄촤의 $CO_2$ 가스화 반응성에 관한 실헙적 연구 (Gasification Kinetics of an Indonesian Subbituminous Coal Char Reactivity with $CO_2$at Elevated Pressure)

  • 안달홍;고경호;이종민;주용진;김종진
    • 에너지공학
    • /
    • 제10권3호
    • /
    • pp.206-213
    • /
    • 2001
  • 가압분류층반응기(PDTF)를 이용하여 가압하에서 인도네시아 아역청탄촤의 $CO_2$, 가스화 반응성을 연구하였다. 가스화온도(900~140$0^{\circ}C$), 이산화탄소분압 (0.1-0.5MPa) 및 시스템전압(0.5, 0.7, 1.0 및 1.5MPa)이 촤-$CO_2$반응율에 미치는 영향을 결정하였다. 동일한 $CO_2$, 분압과 온도조건하에서도 가스화반응속도(gasification rate)는 시스템전압에 따라 영향을 받는 것이 발견되었다. 시스템압력이 변화하는 조건하에서의 가스화반응속도을 모사하기 위하여 n차반응속토식 R=k$P^{n}$ $_{gas}$에 시스템전압항을 추가하여 R=k$P^{n}$ $_{gas}$ $P^{m}$ $_{total}$ 으로 수정하였다. 고온가압하에서의 인도네시아 아역청탄촤-$CO_2$ 가스화반응율은 dX/dt=(174.1)exp(-71.5/RT) ( $P_{CO2}$)$^{0.40}$( $P_{total}$ )$^{0.65}$(1-X)$^{2}$ 3/로 표현할 수 있을 것이다.것이다.것이다.다.

  • PDF

화학기상증착에 의한 Fe-6.5wt%Si철심재료의 특성평가 (Characteristics of Fe-6.5wt%Si Core Material by Chemical Vapor Deposition Method)

  • 윤재식;김병일;박형호;배인성;이상백
    • 한국재료학회지
    • /
    • 제11권6호
    • /
    • pp.512-518
    • /
    • 2001
  • 6.5wt%Si강판을 낮은 철손실, 고투자율 그리고 자왜가 거의 0으로 우수한 자성재료로 잘 알려져 있다. 본 실험에서는 화학기상증착 (Chemical Vapor Deposition)으로 6.5wt%Si 강판을 만들었다 이 과정은 튜브 노내에서 실리콘의 함량이 낮은 Si강판에 SiCl$_4$가스를 반응시킨다. 이때 SiCl$_4$가스에서 분해된 Si의 원자들은 모재인 강판 표면에 증착되어 표면층에 Si가 풍부한 층을 형성한다. 마지막으로 고온에서 확산과정을 통하여 모재 내부로부터 실리콘의 함량이 균일한 강판을 얻을 수 있다. 0.5mm두께를 갖은 6.5wt%Si 강판의 철손실은 고주파수에서 약 8.92W/kg를 나타냈으며 투자율은 53,300으로 일반 실리콘강판, 즉 2.5wt%Si강판의 투자율 37,100보다 약 두배 가량 증가하였다. 또한 기계적인 특성을 평가하기 위해서 일반 0.5wt%Si강판과 773K의 온도에서 수시간 열처리한 강판을 인장실험 하였다. 따라서 수 시간 열처리한 시편에서 연신율이 증가함을 알 수 있었으며 파단면을 관찰한 결과 입 계파단면이 현저히 감소했음을 알았다

  • PDF

탄소환원질화법에 의한 AlN 제조 규모확대 시험결과 (A Scale-Up Test for Preparation of AlN by Carbon Reduction and Subsequent Nitridation Method)

  • 박형규;김성돈;남철우;김대웅;강문수;신광희
    • 자원리싸이클링
    • /
    • 제25권5호
    • /
    • pp.75-83
    • /
    • 2016
  • 탄소환원질화법을 이용하여 질화알루미늄(Aluminum Nitride: AlN)을 제조하는 연구를 배치당 0.7 ~ 1.5 kg 규모로 규모 확대하여 수행하였다. 고품위 알루미나 분말과 탄소(carbon black)를 배합하여 흑연 도가니에 장입하고, 노내 진공도 $2.0{\times}10^{-1}Torr$에서 온도($1,550{\sim}1,750^{\circ}C$), 시간(0.5 ~ 4 hr), $N_2$유량($10{\sim}40{\ell}/min$)을 변화시키면서 AlN을 합성하였다. 실험결과 합성온도 $1,700{\sim}1,750^{\circ}C$, 합성시간 3시간, 질소유량 $40{\ell}/min$가 적정 조건이었다. 또한, 합성한 AlN에 잔존하는 탄소를 제거하기 위하여 관상로에서 온도 $650-750^{\circ}C$, 1 - 2시간 범위에서 탈탄을 시킨 결과, 알루미나와 탄소 몰배합비 1 : 3.2 로 합성한 시료를 대기 분위기에서 탈탄온도 $750^{\circ}C$, 관상로의 회전속도 1.5 rpm에서 2시간 탈탄하는 것이 적정조건이었다. 시험 제조한 AlN의 성분 분석 결과 C 함량 835 ppm, O 함량 0.77%으로서 순도 99% 이상의 고품위 제품을 제조할 수 있었다.

열증착법으로 성장된 ZnO 나노구조물의 산소유량 변화에 대한 성장 변화 (Investigation on Growth Characteristic of ZnO Nanostructure with Various O2 Pressures by Thermal Evaporation Process)

  • 김경범;장용호;김창일;정영훈;이영진;조정호;백종후;남산
    • 한국전기전자재료학회논문지
    • /
    • 제24권10호
    • /
    • pp.839-843
    • /
    • 2011
  • ZnO nanostructures were developed on a Si (100) substrate from powder mixture of ZnO and 5 mol% Pd (ZP-5) as reactants by ${\times}$ sccm oxygen pressures(x= 0, 10, 20, 40). DTA (differential thermal analysis) result shows the Pd(5 mol%)+ZnO mixtured powder(PZ-5) is easily evaporated than pure ZnO powder. The PZ-5 mixtured powder was characterized by DTA to determine the thermal decomposition which was found to be at $800^{\circ}C$, $1,100^{\circ}C$. Weight loss(%) and ICP (inductively coupled plasma) analysis reveal that Zn vaporization is decreased by increased oxygen pressures from the PZ-5 at $1,100^{\circ}C$ for 30 mins. Needle-like ZnO nanostructures array developed from 10 sccm oxygen pressure, was well aligned vertically on the Si substrate at $1,100^{\circ}C$ for 30 mins. The lengths of the Needle-like ZnO nanostructures is about 2 ${\mu}m$ with diameters of about 65 nm. The developed ZnO nanostructures exhibited growth direction along [001] with defect-free high crystallinity. It is considered that Zn vaporization is responsible for the growth of Needle-like ZnO nanostructures by controlling the oxygen pressures. The photoluminescence spectra of ZnO nanostructures exhibited stronger 376.7 nm NBE (near band-edge emission) peak and 529.3 nm DLE (deep level energy) peak.

Sol-gel deposited TiInO thin-films transistor with Ti effect

  • Kim, Jung-Hye;Son, Dae-Ho;Kim, Dae-Hwan;Kang, Jin-Kyu;Ha, Ki-Ryong
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2009년도 제38회 동계학술대회 초록집
    • /
    • pp.200-200
    • /
    • 2010
  • In recent times, metal oxide semiconductors thin films transistor (TFT), such as zinc and indium based oxide TFTs, have attracted considerable attention because of their several advantageous electrical and optical properties. There are many deposition methods for fabrication of ZnO-based materials such as chemical vapor deposition, RF/DC sputtering and pulsed laser deposition. However, these vacuum process require expensive equipment and result in high manufacturing costs. Also, the methods is difficult to fabricate various multicomponent oxide semiconductor. Recently, several groups report solution processed metal oxide TFTs for low cost and non vacuum process. In this study, we have newly developed solution-processed TFTs based on Ti-related multi-component transparent oxide, i. e., InTiO as the active layer. We propose new multicomponent oxide, Titanium indium oxide(TiInO), to fabricate the high performance TFT through the sol-gel method. We investigated the influence of relative compositions of Ti on the electrical properties. Indium nitrate hydrate [$In(NO^3).xH_2O$] and Titanium isobutoxide [$C_{16}H_{36}O_4Ti$] were dissolved in acetylacetone. Then monoethanolamine (MEA) and acetic acid ($CH_3COOH$) were added to the solution. The molar concentration of indium was kept as 0.1 mol concentration and the amount of Ti was varied according to weighting percent (0, 5, 10%). The complex solutions become clear and homogeneous after stirring for 24 hours. Heavily boron (p+) doped Si wafer with 100nm thermally grown $SiO_2$ serve as the gate and gate dielectric of the TFT, respectively. TiInO thin films were deposited using the sol-gel solution by the spin-coating method. After coating, the films annealed in a tube furnace at $500^{\circ}C$ for 1hour under oxygen ambient. The 5% Ti-doped InO TFT had a field-effect mobility $1.15cm^2/V{\cdot}S$, a threshold voltage of 4.73 V, an on/off current ratio grater than $10^7$, and a subthreshold slop of 0.49 V/dec. The 10% Ti-doped InO TFT had a field-effect mobility $1.03\;cm^2/V{\cdot}S$, a threshold voltage of 1.87 V, an on/off current ration grater than $10^7$, and a subthreshold slop of 0.67 V/dec.

  • PDF

HK-40강의 열화도에 따른 자화율의 변화 (Magnetic Susceptibility depending on the Thermal Degradation of HK-40 Steel)

  • 김정민;손대락;박종서;남승훈;김동균;한상인;최송천;류대현
    • 비파괴검사학회지
    • /
    • 제24권1호
    • /
    • pp.22-28
    • /
    • 2004
  • 현장에서 사용된 열화도가 같기 다른 여러 종류의 가열로 튜브 사용재를 확보하는 것이 실상 어려운 일이다. 따라서 가열로 튜브 사용재의 미세조직을 모사하기 위하여 HK-40강을 등온 열처리하였다. $1050^{\circ}C$에서 등온 열처리하여 열처리시간이 다른 5개의 시험편을 준비하였다. 열화시간에 따른 HK-40강의 열화도를 비파괴적으로 평가하는 방법을 제안하기 위하여 자기적 성질 중 자화율의 변화를 연구하였다. 자화율은 상온에서 열화도가 커짐에 따라 증가하였다. 자기적 방법으로 측정한 자화율의 변화를 인장특성, 경도의 변화와 비교하여 보았다. HK-40강의 미세조직 관찰 및 EDS 분석을 통하여 미세조직의 변화가 인장 특성과 경도, 자화율에 영향을 주는지 살펴보았다. 실험결과를 토대로 자화율을 이용하여 HK-40강의 열화도를 비파괴적인 평가할 수 있는 방법을 제안하였다.