• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 제5회 박판성형 SYMPOSIUM
• /
• pp.93-98
• /
• 2006

Warm forming technology was classified into hot gas forming of using compressible fluid as a nitrogen gas and warm hydroforming of using the incompressible fluid as a thermal oil by using medium fluid. In this study, the aluminum side-rail part was developed with warm hydroforming technology. For the warm hydroforming system, top and bottom die was designed to insert heating cartridge in die cavity and special indirect fluid heating system was designed to heat the thermal oil. As increase the temperature, hydroformability was increased linearly. Aluminum side-rail center part was formed 90% at the internal pressure of 100bar and perfectly formed at 300bar within a moderate temperature. The tube material used for warm hydroforming was a aluminum 6000 series alloy with the diameter of 120mm, thickness of 5mm, length of 1,300mm. Warm hydroformed side-rail center part had 20% of maximum expansion ratio and below 20% of maximum thinning ratio at corner radius. This results were provided to show warm hydroforming possibility for aluminum automotive components.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2000년도 KIASC Conference 2000 / 2000년도 학술대회 논문집
• /
• pp.43-47
• /
• 2000

Two modes of shock waves, a compression shock wave and a thermal shock wave, propagating in He II have been investigated. The shock waves are at a time generated by the impingement of a gasdynamic shock wave onto a He II free surface in the newly developed superfluid shock tube facility. Superconductive temperature sensors, piezo-type pressure transducers and visualization photograph were used for the measurement of them and the phenomena induced by them were investigated in detail. It is found that the compression by a compression shock wave in He II causes temperature drop because He II has negative thermal expansion coefficient. the thermal shock wave is found to be of a single triangular waveform with a limited shock strength. The waveform is similar to that generated by stepwise strong heating from an electrical heater for relatively long heating time. In the experiments at the temperatures near the lambda temperature, no thermal shock wave is sometimes detected in shock compressed He II. It can be understood that shock compression makes He Ii convert to He I in which no thermal shock wave is excited.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.711-714
• /
• 2008

The objective of this paper is to know the characteristics of pressure through a simplified typical carburetor used in small engines at the different throttle opening conditions. The carburetor is the device responsible for creating the right air-fuel mixture according to the different engine operating conditions. It is activated by the static or the dynamic pressure. The carburetor dummy is geometrically similar of LPG brush-cutter engine's diaphragm carburetor and is made of acrylic. Suction system gives body to crankcase vacuum using the vacuum pump and throttle opening conditions are controled by transfer device. Carburetor venturi throat and fuel charging tube diameter is each 20mm, 4.1mm. The result of the work presents an unprecedented phenomenon of suction pressure variation inside the carburetor venturi. It is predicted that these unprecedented pressure variation be caused by minor losses; sudden contraction or expansion, open or partially closed and so on.

• 대한기계학회논문집A
• /
• 제35권6호
• /
• pp.669-675
• /
• 2011

등하중지지대는 플랜트의 배관을 지지하는 장치로서 열팽창으로 인하여 배관이 움직이더라도 배관에 일정한 힘을 제공하는 역할을 한다. 본 논문에서는 등하중지지대의 캠 윤곽을 설계하는 방법을 제안하였다. 캠의 윤곽은 캠의 기하학적 관계식, 부하 튜브의 힘 평형식, 보조스프링의 압축력과 캠의 회전각 사이의 관계식, 그리고 캠의 모멘트 평형식을 만족하여야 함을 보였고, 이 방정식들을 연립하여 푸는 계산 과정을 제안하였다. 이 계산 과정을 사용하여 요구하는 조건을 만족하는 등하중지지대의 캠을 설계하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.128-134
• /
• 1996

In this study, the thermal and optical properties of multicomponent glass optical fiber by adding heavy metal oxide Ga$_2$O$_3$were investigated. The fiber samples were made by rod in tube method. The optical loss of fiber was measured in 0.3~1.8${\mu}{\textrm}{m}$ wavelength region. As Ga$_2$O$_3$increased up to 20wt%, the transition and softening temperature of bulk glass were increased from 495$^{\circ}C$ to 579$^{\circ}C$ and from 548$^{\circ}C$ to 641$^{\circ}C$respectively. Whereas the thermal expansion coefficient was decreased from 102 to 79.1$\times$10$^{-7}$ $^{\circ}C$. The refractive index was increased from 1.621 to 1.665, and IR cut-off wavelength was enlarged from 4.64${\mu}{\textrm}{m}$ to 6.1${\mu}{\textrm}{m}$. The optical loss of fiber was decreased and more remarkably decreased in 1.146${\mu}{\textrm}{m}$~1.8${\mu}{\textrm}{m}$ wavelength region.

• Journal of Medicine and Life Science
• /
• 제17권1호
• /
• pp.16-20
• /
• 2020

Spontaneous hemopneumothorax is a rare disease, and it can cause life threatening condition. It is characterized by the accumulation of more than 400 mL of blood and air in the pleural cavity without any other apparent causes. A previously healthy 22-year-old female patient presented with acute chest pain and dyspnea. Chest X-ray and computed tomography revealed a massive hemopneumothorax in the left hemithorax. The images showed a completely collapsed left lung with right-sided tracheal deviation, several pleural adhesion bands, and fluid collection with air-fluid level. We emergently performed a closed thoracostomy, and then 560 mL of fresh bloods were initially drained. We considered an emergent video-assisted thoracoscopic surgery for pulmonary wedge resection and bleeding control because of the massive hemothorax. However, the patient's vital signs were stabilized after blood transfusion and supportive cares for re-expansion pulmonary edema. The patient discharged from the hospital on 11^th in-hospital day after removal of the chest tube, and there had not been any recurrence of the pneumothorax for 10 months. We suggest that treatment strategy should be decided upon individually based on the patient's condition and clinical course of the disease.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1047-1052
• /
• 1996

In this study, the thermal and optical proper-ties of multicomponent oxide glass fiber for IR sensor by adding heavy metal oxide Ga$_{2}$O$_{3}$ were investigated. The fiber samples were made by rod-in tube method. The optical loss of fiber was measured in 0.3-1.8/M wavelength region. As Ga$_{2}$O$_{3}$ increased up to 12wt%, the transition and softening temperature of bulk glass were increased from 495.deg. C to 564.deg. C and from 548.deg. C to 612.deg. C respectively. Whereas the thermal expansion coefficient was decreased from 102 to 88.2*10$^{-7}$ /.deg. C. The refractive index was increased from 1.621 to 1.662, and IR cut-off wavelength was enlarged from 4.64.mu.m to 5.22.mu.m. The optical loss of fiber was decreased and more remarkably decreased in 1.146.mu.m-1.8.mu.m wavelength region.

• International Journal of Automotive Technology
• /
• 제8권2호
• /
• pp.149-154
• /
• 2007

The engine behavior in a transient condition is important to not only emission regulations but also fuel economy. A fast response gas analyzer can be a useful tool to investigate exhaust gas in a transient operation. It should be designed to analyze gas concentration with a short time constant by a fast sampling module and an appropriate measuring method for each emission element. In this study, a new fast sampling module is introduced and flow analysis is performed by numerical simulation. The analysis has shown the proper operating condition and the sensitivity of the module for practical application. Calculated flow to the sampling module has $0.5{\sim}4%$ error, while backflow toward the expansion tube is expected when pressure in CP (Constant Pressure) chamber is over 0.6 bar. For a stable supply of flow to the optical cell, sample gas pressure should be in the range, $0.35{\sim}1.90$ bar, when the pressure in the CP camber and the optical cell are 0.2 bar and 0.158 bar, respectively.

• 한국멀티미디어학회논문지
• /
• 제20권1호
• /
• pp.1-9
• /
• 2017

Explosive deployment of smart mobile devices such as smart phones, and tablets along with expansion of wireless internet bandwidth have enabled the deployment of mobile video streaming such that video traffic becomes the most important service in wireless networks. Recently, for more efficient video streaming services, the ISO MPEG group standardized a protocol called DASH (Dynamic Adaptive Streaming over HTTP) and the standard has been quickly adopted by many service providers such as YouTube and Netflix. Despite of the convenience of mobile streaming services, users also suffer from low QoE(Quality of Experience) due to dynamic channel fluctuations and unnecessary downloading due to high churning rates. This paper proposes a noble efficient video rate selection algorithm considering user buffer level, channel condition and churning rate. Computer simulation based performance study showed that the proposed algorithm improved the QoE significantly compared to a method that determines the video rate based on current channel conditions. Especially, the proposed method reduced the rebuffering rate, one of the most important performance factors of the QoE, to a nonnegligible level.

• 설비공학논문집
• /
• 제17권12호
• /
• pp.1139-1144
• /
• 2005

This study has been performed to investigate the thermal performance of variable conductance heat pipe (VCHP) with meshed wick. The length of condenser portion in a VCHP is varied by the expansion of inert gas with the operation temperature, and the heat transport capacity is thus varied with the operating temperature. In this study, numerical evaluation of the VCHP is made for the thermal performance of VCHP, based on the diffusion model of inert gas. Water is used as a working fluid and nitrogen as a control inert gas in the copper tube. As a result, the thermal performance of VCHP has been compared with that of constant conductance heat pipe (CCHP) according to the variation of operation temperature. Maximum heat transport capacity of VCHP is mainly presented for operation temperature and the variation of operation temperature is also presented for heat transfer rate of VCHP.