• 한국산학기술학회논문지
• /
• 제16권5호
• /
• pp.2985-2992
• /
• 2015

본 연구에서는 엇갈린형 관군에 대해 ANSYS FLUENT v.14의 SST 난류모델을 적용하여 가로피치, 튜브표면, 와류발생기위치 등의 변화에 따른 열전달 및 압력강하 특성을 이론적으로 해석하였다. CFD 해석시 튜브표면의 온도는 363 K, 입구측 공기온도는 313 K이고 입구측 속도는 5 m/s에서 10 m/s까지 가정하였다. 그 해석결과로서 열전달계수는 가로피치에 대한 영향은 큰 차이가 없었고, 튜브표면의 돌기형상은 열전달 및 압력강하 특성에서 원형이 톱니형보다 적절하게 나타내었으며, 와류발생기의 설치 경우에는 열전달특성이 튜브의 전방부 위치가 후방부 위치보다 약 4.6% 정도로 우수함을 보였다.

• 한국산학기술학회논문지
• /
• 제21권4호
• /
• pp.446-451
• /
• 2020

전열관군으로 이루어진 열교환기에서 유동에 따른 진동은 전열 관군 배관의 파손을 유발할 수 있어서 열교환기에서 유동 유발 진동 특성을 규명할 필요가 있다. 본 연구는 전열 관군의 원관에서 입구의 유속이 일정한 경우와 주기적인 변동이 있는 경우에 대하여 시간에 따라 전열 관군 원관 1, 10 그리고 마지막 19번 원관에서 와류의 시간 변동 특성을 살펴보고 양력의 시간 변화 특성과 PSD 특성을 분석하여 전열 관군 원관에서 전방류의 주기적인 속도 변동에 따른 유동 특성을 규명하였다. 일정 입구 유속의 경우는 칼만 와류가 후류에 있는 원관의 유동에 영향을 미치고 있고 후류의 전열관군과 전방의 전열관군에서의 와류는 다소 시간적인 차이를 보여주지만 같은 주기의 칼만 와류를 발생하고 있음을 관찰할 수 있었다. 주기적인 입구 유속의 경우는 전열 관군에서 와류가 강한 유동이 흐르다가 유속이 줄어들 때는 와류가 약한 유동이 흐르는 것이 반복됨을 알 수 있다. 일정 입구 유속의 경우는 양력의 PSD로 살펴본 결과 주파수는 37.25Hz이며 19번 원관의 경우는 18.63Hz와 50Hz 근방에서 주파수가 관찰 되었다. 주기적인 입구 유속의 경우는 37.25Hz와 속도 주기인 18.63Hz에서 주된 주파수 특성을 보여주었다. 마지막 원관인 19번 원관은 20Hz에서 50Hz 사이에서 많은 피크 주파수를 관찰할 수 있었다.

• 대한기계학회논문집B
• /
• 제35권2호
• /
• pp.215-220
• /
• 2011

산업용 보일러의 열효율을 높이고 체적을 줄이기 위하여 0.5 t/h 급 무연소실 보일러를 개발하였다. 별도의 연소실이 없이 증발관이 화염에 노출된 구조에서 화염 안정성을 확보하기 위하여 금속섬유버너를 채택하였다. 증발관은 관군의 형태로 버너 하류에 배치되고 하류에 설치된 증발관에는 휜을 설치하여 열교환 면적을 확보하였다. 무연소실 보일러는 관군에 대한 열전달 관계식으로부터 설계하였고 본 연구에서는 시제품에 대한 실험 및 보일러 내부의 유동 및 열전달에 대한 수치해석을 수행하여 관군에 대한 관계식을 적용한 설계와 비교하였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.691-697
• /
• 2008

Heat exchangers are commonly used in practice in a wide range of application, from heat and air-conditioning system in a household, to chemical processing and power production in large plant. An Experimental study was conducted to investigated the fluid flow and heat transfer around four circular cylinders of in-line in a cross flow of air. The local and average heat transfer characteristics for tube banks are investigated in the present study. Heat transfer in a heat exchanger usually involves convection in each fluid and conduction through the wall separating the two fluid. The in-line pitch ratio was in the range $1.5{\leq}L/d{\leq}4.0$, where L is the center distance and d the cylinder diameter, and in the Reynolds number $8,000{\leq}Re{\leq}50,000$. The local and mean Nusselt numbers were estimated. Subsequently, the heat transfer characteristics of four circular cylinders are found to exhibit a strong dependency upon the separation point of their upstream cylinders.

• 대한설비공학회지:설비저널
• /
• 제17권3호
• /
• pp.238-248
• /
• 1988

The flow pattern inside the power condenser is generally known to be very complicated due to the phase change and turbulence effects as well as the effect of condenser geometry. In the present study, the flow pattern inside the power condenser was numerically simulated with a personal computer. The widely known CHAMPION 2/E/FIX(Concentration, Heat and Momentum Program Instruction Outfit, 2D/Elliptic/Fixed grid) computer code was modified for this purpose. The flow was asssumed to be two-dimensional and steady-state, and the tube bank was considered to be homogeneous porous medium. Simple turbulent diffusion coefficients based on the appropriate experiments were obtained for the computation. Through this analytical approach, the flow pattern could be predicted fairly well. The computational results also show that the location of the air vent plays an important key role in determining the efficiency of the condenser.

• 소음진동
• /
• 제9권6호
• /
• pp.1116-1122
• /
• 1999

HRSG, which is one of main components of the combined cycle power plant,is composed of an inlet duct, a main body and casing, an outlet duct and a stack. It is important to design HRSG wihtin the allowable noise limit. For this purpose, it is necessary to analyze and predict the noise reduction and radiation at HRSG. In this paper, the technology for the noise prediction at each part of HRSG has been based on the empirical and field data, and also the HRSG noise prediction program has been developed. In order to verify the developed technology and program a field test is conducted. The results of noise prediction show good agreement with the measured.

• 한국의류산업학회지
• /
• 제23권6호
• /
• pp.726-743
• /
• 2021

This study tried to examine the fashion design and style of representative K-Pop boy groups BTS and SEVENTEEN appearing on music shows. The data collection was conducted on 4 music programs(Inkigayo, Music Bank, Show! Music Core, M COUNTDOWN) and YouTube(www.youtube.com) for each boy who worked for 5 years from January 2016 to December 2020. Result analysis utilized the stage scenes and music videos of the title songs of BTS and Seventeen. As for the fashion design and style characteristics of BTS, it was found that overall, the color, pattern, and decoration of the bottom were minimized, and the style was changed mainly by the top of the denim pants. As for Seventeen's fashion design and style characteristics, it was analyzed that plain simple slacks, bright and modest chromatic colors, and geometric and stylistic patterns with street retro sensibility were relatively emphasized, and natural and romantic images appeared a lot. As a result of examining the differences in fashion design and style characteristics between BTS and Seventeen, significant differences were found in color, tone, color scheme, material type, material combination, detail, trimming, pattern, accessories, and fashion image. Overall, it was found that both groups minimized the use of decorative elements such as patterns, details, and trimmings.

• Parasites, Hosts and Diseases
• /
• 제57권6호
• /
• pp.657-664
• /
• 2019

We identified the echinostome metacercariae in Chinese mystery snails, Cipangopaludina chinensis malleata, from Xiengkhuang Province, Lao PDR with morphologies of adult worms recovered. Total 20 snails were examined with artificial digestion method and then the collected metacercariae were orally infected to a mouse and a rat. Adult worms recovered from experimental animals were observed with a light microscope and a SEM. The metacercariae were round, 125×123 ㎛ in average size, with a moderately thick cyst wall, collar spines distributed in the head collar and excretory granules in 2 canals of excretory tube. Adult flukes (3-week-old in a rat) were elongated, ventrally curved and 5.310×1.023 mm in average size. Head collar distinct, bearing 43 collar spines with 5 end group ones on each side. Oral sucker subterminal, prepharynx very short, pharynx well developed, and esophagus relatively short. Cirrus sac well developed, with a saccular seminal vesicle, and ventral sucker very large. Ovary round and on the median line of the body. Testes tandom and elongated. Eggs operculated, elliptical and 90×57 ㎛ in average size. In the SEM observation, the head crown prominent, with 43 collar spines resembled with horns of younger stag. Scale-like tegumental spines were densely distributed on the surface between the head collar and ventral sucker, and their densities were decreased posteriorly. Conclusively, the metacercariae detected in C. chinensis malleata from Lao PDR were identified as those of Echinostoma macrorchis based on the morphological characteristics of adult worms.

• 한국수소및신에너지학회논문집
• /
• 제31권1호
• /
• pp.73-81
• /
• 2020

For the fault tree analysis (FTA) analysis of the packaged hydrogen filling station, the composition of the charging station was analyzed and the fault tree (FT) diagram was prepared. FT diagrams were created by dividing the causes of events into external factors and internal factors with the hydrogen event as the top event. The external factors include the effects of major disasters caused by natural disasters and external factors as OR gates. Internal factors are divided into tube tailer, compressor & storage tank, and dispenser, which are composed of mistakes in operation process and causes of accidents caused by parts leakage. In this study, the purpose was to improve the hydrogen station. The subjects of this study were domestic packaged hydrogen stations and FTA study was conducted based on the previous studies, failure mode & effect analysis (FMEA) and hazard & operability study (HAZOP). Top event as a hydrogen leaking event and constructed the flow of events based on the previous study. Refer to "Off shore and onshore reliability data 6th edition", "European Industry Reliability Data Bank", technique for human error rate prediction (THERP) for reliability data. We hope that this study will help to improve the safety and activation of the hydrogen station.

• 한국표면공학회지
• /
• 제34권6호
• /
• pp.575-584
• /
• 2001

Erosion due to abrasive particles contained in gas streams from boilers has been emerged as a significant problem in the coal fired power plants. Particle erosion accounted for approximately 50% of boiler failures and especially flyash erosion was responsible for 20~30% of emergency boiler shutdowns. Particularly, because of the high ash loading and high velocity, most erosion occurs in the boiler tubes and economiser tube bank where the direction of the gas stream changes to $180^{\circ}$ .In this study, a high temperature particle erosion tester was used to evaluate erosion rate in a simulated environment. The erosion parameters such as erosion temperature, particle impact angle, particle velocity and various particle size were changed. Flyash is the combustion product of the pulverized coal, where size is ranging from 1 to $200\mu\textrm{m}$. Flyash composed of mainly SiO$_2$, $A1_2$$_O3$, and $Fe_2$$O_3$has dense spherical particles and irregular particles containing numerous pores and cavities. From the erosion tests at various conditions, the maximum erosion was experienced at impact angles of $30^{\circ}$ to $60^{\circ}$ In addition, erosion rate increased in proportional to velocity and temperature. And from the observation of the eroded surfaces, it was also concluded that 304 stainless steel was mainly eroded by extrusion-forging at high impact angle ($90^{\circ}$) and by microcutting mechanism at low impact angles ($30^{\circ}$ and $45^{\circ}$).