• Journal of the Korean Geotechnical Society
• /
• v.22 no.8
• /
• pp.43-54
• /
• 2006

The scope of this paper covers the applications of bender element tests in consolidation, tomography, and liquefaction. Loading and unloading time during consolidation are evaluated based on shear wave velocity. As S-wave velocity is dependent on effective stress, the loading step may be determined. However, cautions are required due to the different mechanism between the settlement and effective stress criteria. The stress history may be evaluated because the S-wave shows the cement controlled regime and stress controlled regimes. A fixed frame complemented with bender elements permits S-wave tomography The tomography system is tested at low confinement within a true triaxial cell. Results show that shear wave velocity tomography permits monitoring changes in the velocity field which is related to the average effective stress. To monitor the liquefaction phenomenon, S-wave trans-illumination is implemented with a high repetition rate to provide detailed information on the evolution of shear stiffness during liquefaction. The evolution of shear wave propagation velocity and attenuation parallel the time-history of excess pore pressure during liquefaction. Applications discussed in this paper show that bender elements can be a very effective tool for the detection of shear waves in the laboratory.

• Steel and Composite Structures
• /
• v.35 no.6
• /
• pp.739-752
• /
• 2020

This paper aims to investigate cyclic plasticity of a new type of high-performance austenitic stainless steel with both high strength and high ductility. The new stainless steel termed as QN1803 has high nitrogen and low nickel, which leads to reduction of cost ranging from 15% to 20%. Another virtue of the new material is its high initial yield strength and tensile strength. Its initial yield strength can be 40% to 50% higher than conventional stainless steel S30408. Elongation of QN1803 can also achieve approximately 50%, which is equivalent to the conventional one. QN1803 also has a corrosion resistance as good as that of S30408. In this paper, both experimental and numerical studies on the new material were conducted. Full-range true stress-true strain relationships under both monotonic and cyclic loading were obtained. A cyclic plasticity model based on the Chaboche model was developed, where a memory surface was newly added and the isotropic hardening rule was modified. A user-defined material subroutine was written, and the proposed cyclic plasticity model can well evaluate full-range hysteretic properties of the material under various loading histories.

• Journal of the Korean Home Economics Association
• /
• v.37 no.1
• /
• pp.133-143
• /
• 1999

Originally, ancestral rites is a ceremony to pay filial piety to ancestors continuously even though they died, and this is a startingpoint based on the thought of paying respect to ancestors and 'root consciousness' which Korean people have. In the earliest days, Korean people worshipped nature and the sacrificial rituals were performed mainly for the fods of the skies and the earth. After the end-Koryeo Era introduced [Juja-Garye]ancestrial rites of forefather in home generalized. By the way, the foods for ancestrial rites on the original literature centering the [Sa-Rye-Pyon-Ram]are as follows: raw meat(saeng: 牲), rice and broth(ban, gaeng: 飯羹), fruits(果), slice meats(po: 脯), salted dry fish(jaban(佐飯), rice punch(sikhye: 食醯), soup(tang: 湯), fish and meat, roasts beef (jeok: 炙), roast vegetable(sookchae: 熟菜), rice cake(pyon: 餠), noodles(麵), soy(醬), Kimchi(沈菜), drink(酒), green tea(cha: 茶) etc. Today, ancestral rites, basically with this conception, has a function to bind the family and relatives as one. But as double income family are increasing, most housewives have heavy burden mentally and financially to prepare the food for the ancestral. The foods for ancestral rites can be said a way to express the internal true heart, and a basic medium to practice the filial piety. Many documents let us know that a few days before the ancestral rites, we should prepare the food for it with careful and pious attitude. And, they stress that our sincere attitude in preparing food is important rather than its quantity. In this industrial society, we have lots of difficulty preparing and observing the same service as it in the traditional socity. But I think that housewives can be freed from the burden they have to some degree when they realize what the true meaning of ancestral rites is and that the food for it plays a role an external expression.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.2
• /
• pp.75-82
• /
• 2005

Recently the needs of high reliable substances of high strength and high ductility are gradually increased with the development of aerospace industry. The characteristics of maraging steel has high ductililty, formability, corrosion resistant and high temperature strength and is easy to fabricate, weld and treat with heat, and maintain an invariable size even after heat treatment. e steels are furnished in the solution annealed condition and they achieve full properties through martensitic precipitation aging a relatively simple, low temperature heat treatment. As is true of the heat treating procedures, aging is a time/temperature dependent reaction. Therefore, the objective of this stud)'was consideration of fatigue characteristics according as Nb(niobium) content and time/temperature of heat treatment change. Also the stress analysis, fatigue lift, and stress intensity factor were compared with experiment results and FEA(finite element analysis) result. The maximum ftresses of)( Y, and Z axis direction showed about $2.12\times$10$^{2}$MPa, $4.40\times$10$^{2}$MPa and $1.32\times$10$^{2}$MPa respectively. The fatigue lives showed about $7\%$ lower FEA result than experiment result showing almost invariable error every analyzed cycle. Stress intensity factor of the FEA result was lower about $3.5~ 10\%$ than that of the experiment result showing that the longer fatigue crack ten添 the hi인or error. It considered that the cause for the difference was the modeled crack tip having always the same shape and condition regardless of the crack growth.

• CELLMED
• /
• v.5 no.1
• /
• pp.5.1-5.5
• /
• 2015

In this first double-blind-placebo-controlled investigation of the Aeon Patch, electrocardiographic data were acquired from 50 well-hydrated volunteers [21 females and 29 males, age: 19-79, weight: 117-334 lbs, height: 5'-6',3"], under 3 different conditions for a total duration of 15 min (5 min/condition). Condition1: Control (C) - while wearing no Patch, Condition 2: Placebo (P) or Active (A) - after wearing either the Placebo or the Aeon Patch for 20 min, and Condition 3: Active (A) or Placebo (P) - after wearing either the Aeon or the Placebo Patch for 20 min. There was a washout period of 15 min between Conditions 2 and 3. All involved in the investigation were blind to the (A) and (P) Patches as they looked exactly the same and were assigned in a random fashion. The hypothesis to be tested was: Wearing the Aeon Patch for 20 min reduces stress. Data were first quality assured and those subjects who showed a parasympathetic response after wearing the Patch within 20 min were identified as early responders. Thirty subjects (60%) achieved a relaxed state after wearing the Aeon Patch as early as 20 min. Statistical analysis (one-sample inference) was used to compare the spectral features of the responders. The normalized LF/HF decreased significantly ($24%{\pm}9%$ after 20 min) in condition (A) compared to condition (P) with a p-value < 0.047 (n = 30) in responders. Therefore, the hypothesis that wearing the Aeon Patch for 20 min reduces stress was accepted as true.

• Journal of Powder Materials
• /
• v.9 no.5
• /
• pp.307-314
• /
• 2002

The high temperature deformation behavior of the activated sintered W powder compacts was investigated. The W compact showed the relative density of 94% with the average W grain size of $23\mutextrm{m}$ by activated sintering at $1400^{\circ}C$ for 1 hour. Compression tests were carried out in the temperature range of $900-1100^{\circ}C$ at the strain rate range of $10^{0}$/sec - $10^{-3}$/sec. True stress-strain curve and microstructure exhibited the grain boundary brittleness which was dependent on the compression test temperature. The activated sintered W compact showed that the maximum stress as well as the strain at the maximum stress was abruptly decreased as the test temperature increase from $900^{\circ}C$ to 1000 and $1100^{\circ}C$ regardless of the strain rate. The discrepancy of the microstructure in the specimen center was obviously observed with the increase of the test temperature. After compression test at $900^{\circ}C$ the W grain was severely deformed normally against the compression axis. However, after compression test at $1000^{\circ}C$ and $1100^{\circ}C$ the W grain was not deformed, but the microcrack was formed in the W grain boundary. The Ni-rich second phase segregated along the W grain boundary could be partly unstable over $900^{\circ}C$ and affect the poor mechanical property of the activated sintered W compact.

• Korean Journal of Food Science and Technology
• /
• v.26 no.2
• /
• pp.103-109
• /
• 1994

Changes in the rheological properties and the linear viscoelasticity of fish protein gel upon the thermal processing were studied by using mathematical models with stress-relaxation data. The linear viscoelasticity of surimi gel was observed in the range of the true strain $0.105{\sim}0.693$ and cross-head speed $50{\sim}250\;mm/min$ applied in this study. The results of the generalized Maxwell analysis showed that the magnitudes of elastic elements $(E,\;E_e)$ were increased, but the viscous element $({\eta}) $was decreased, as the cross-head speeds and strain levels were increased. Compared to the protein gel heated directly at $90^{\circ}C$ without preheating, the protein gel pretreated at $4^{\circ}C$ and $40^{\circ}C$ showed the higher elastic modulus, but showed different trends in the viscous component, depending on the rheological model applied. Thus, the approaching methods and curve fitting of two mathematical models of stress-relaxation to describe the viscoelastic properties of fish protein gel were discussed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.13 no.1
• /
• pp.31-37
• /
• 1993

It is important to improve the germination of grass seeds because they are poor germination under water stress. This experiment was conducted to investigate the response of seeds pre-treated individually with Polyethylene glycol 6000 (PEG) and growth regulators(GA$_3$, Kinetin, NAA) on the germination characteristics when two levels of osmotic potential (0, -5 bar) were put to seeds of Orchardgrass. In the untreated seeds, the total germination rate was decreased under water stress, and the mean germination time was delayed. Priming of Orchardgrass seeds using PEG or GA$_3$ resulted in improved germination under water stress(-5 bar), whereas the opposite was true of kinetin or NAA. The response of seeds primed in solutions of either -15 bar PEG or 100 ppm GA$_3$ was particulary marked compared with the untreated seeds. It is suggested that PEG and GA$_3$ may have positive regulatory effects in triggering the system for water stress alleviation. But the inhibitory effect of the water stress was not completely removed by allowing the seeds to pre-treat in solution of PEG or GA$_3$.

• The Korean Journal of Nuclear Medicine
• /
• v.31 no.1
• /
• pp.50-56
• /
• 1997

Gated SPECT can evaluate the regional wall motion of the heart. We evaluated the regional wall motion of the perfusion abnormality in conventional perfusion SPECT with gated SPECT. In case of suspicious perfusion abnormalities, we tried to differentiate the artifact from true abnormality in coronary vascular disease using gated SPECT. We thought that artifacts would have normal wall motion, whereas fixed defects with decreased wall motion would probably represent coronary artery disease. A total of 275 patients who were performed coronary angiography and T1-201 rest/Tc-99m MIBI dipyridamole stress gated SPECT within 2 months were enrolled. In coronary angiography, stenosis more than 50% was considered as coronary artery disease. After injection of 111MBq T1-201 rest image was obtained on triple head SPECT system. 370MBg Tc-99m MIBI was used for the stress image. Eight-frame per-cardiac-cycle gated Tc-99m SPECT studies were done. All the images were analyzed visually. Using perfusion SPECT, the overall sensitivity and specificity were 87% and 55% respectively. Regarding artery territory, sensitivity and specificity were 68% and 73% for left anterior descending artery(LAD), 62% and 78% for right coronary artery(RCA), 42% and 90% for left ciramflex artery(LCX). Using gated SPECT, the overall sensitivity and specificity were 87% and 66% respectively. Sensitivity and specificity were 68% and 78% for LAD, 62% and 79% for RCA, 42% and 90% for LCX. Among 21 false positive cases in perfusion SPECT, 5 cases were interpreted as true negative with gated SPECT. We conclude that gated SPECT provides a valuable adjunct to perfusion SPECT in characterizing perfusion abnormalities and to improve specificity.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.3
• /
• pp.49-56
• /
• 2012

Rupture disks are a kind of safety device in high pressure equipment and they are used to control rupture pressure in the solid rocket motor. In this paper, a series of rupture experiments was performed using rupture disks made of AISI 316L and rupture pressure of rupture disks was calculated through various assumptions in relation between elasto-plastic material properties and true stress-strain curve. Experiment and FEA indicated rupture pressure is determined by size of rupture disks. As a result of elasto-plastic analysis, only multi-linear stress-strain curve was able to calculate meaningful estimations. Experimental results also showed rupture location are decided by the size of rupture disks. Experimental and FEA results will be applied to control rupture pressure of disks.