• Asian-Australasian Journal of Animal Sciences
• /
• 제33권4호
• /
• pp.556-567
• /
• 2020

Objective: To improve the utility of native grass resources as feed in China, we investigated the dynamics of protein and carbohydrate fractions among Inner Mongolian native grasses, during ensiling and the aerobic stage, using the Cornell Net Carbohydrate and Protein System. Methods: Silages were prepared without or with lactic acid bacteria (LAB) inoculant. We analyzed the protein and carbohydrate fractions and fermentation quality of silages at 0, 5, 15, 20, 30, and 60 d of ensiling, and the stability at 0.5, 2, 5, and 10 d during the aerobic stage. Results: Inner Mongolian native grass contained 10.8% crude protein (CP) and 3.6% water-soluble carbohydrates (WSC) on a dry matter basis. During ensiling, pH and CP and WSC content decreased (p<0.05), whereas lactic acid and ammonia nitrogen (N) content increased (p<0.05). Non-protein N (PA) content increased significantly, whereas rapidly degraded true protein (PB₁), intermediately degraded true protein (PB₂), total carbohydrate (CHO), sugars (CA), starch (CB₁), and degradable cell wall carbohydrate (CB₂) content decreased during ensiling (p<0.05). At 30 d of ensiling, control and LAB-treated silages were well preserved and had lower pH (<4.2) and ammonia-N content (<0.4 g/kg of fresh matter [FM]) and higher lactic acid content (>1.0% of FM). During the aerobic stage, CP, extract ether, WSC, lactic acid, acetic acid, PB₁, PB₂, true protein degraded slowly (PB₃), CHO, CA, CB₁, and CB₂ content decreased significantly in all silages, whereas pH, ammonia-N, PA, and bound true protein (PC) content increased significantly. Conclusion: Control and LAB-treated silages produced similar results in terms of fermentation quality, aerobic stability, and protein and carbohydrate fractions. Inner Mongolian native grass produced good silage, nutrients were preserved during ensiling and protein and carbohydrate losses largely occurred during the aerobic stage.

• 한국정밀공학회지
• /
• 제12권8호
• /
• pp.156-167
• /
• 1995

In this paper, we propose a 3-D range finding method for situation that stereo camera has small translational motion. Binocular stereo generally tends to produce stereo correspondence errors and needs huge amount of computation. The former drawback is because the additional constraints to regularize the correspondence problem are not always true for every scene. The latter drawback is because they use either correlation or optimization to find correct disparity. We present a method which overcomes these drawbacks by moving the stereo camera actively. The method utilized a motion parallax acquired by monocular motion stereo to restrict the search range of binocular disparity. Using only the uniqueness of disparity makes it possible to find reliable binocular disparity. Experimental results with real scene are presented to demonstrate the effectiveness of this method.

• 한국물환경학회지
• /
• 제27권3호
• /
• pp.322-328
• /
• 2011

This study was performed to investigate the characteristics of nutrient removal of municipal wastewater in the membrane bioreactor system with the different types of membrane. Membrane bioreactor consists of three reactors such as two intermittent anaerobic and the submerged membrane aerobic reactor with flat sheet and hollow fiber membrane, respectively. The removal efficiencies of $COD_{cr}$, BOD, SS, TN and TP on the flat sheet membrane bioreactor were 94.3%, 99.0%, 99.9%, 70.3% and 63.1%, respectively. In addition, The removal efficiencies of $COD_{cr}$, BOD, SS, TN and TP on the hollow fiber membrane bioreactor were 94.0%, 99.3%, 99.9%, 69.9% and 66.9%, respectively. The estimated true biomass yield, specific denitrification rate (SDNR), specific nitrification rate (SNR) and phosphorus removal content on the flat sheet membrane bioreactor were $0.33kgVSS/kgBOD{\cdot}d$, $0.043mgNO_3-N/mgVSS{\cdot}d$, $0.031mgNH_4-N/mgVSS{\cdot}d$, and 0.144 kgP/d, respectively. In addition, the estimated true biomass yield, specific denitrification rate (SDNR), specific nitrification rate (SNR) and phosphorus removal content on the hollow fiber membrane bioreactor were $0.30kgVSS/kgBOD{\cdot}d$, $0.067mgNO_3-N/mgVSS{\cdot}d$, $0.028mgNH_4-N/mgVSS{\cdot}d$, and 0.121 kgP/d, respectively. There was little difference between the flat sheet and hollow fiber on the nutrient removal efficiencies except SNR and SDNR. These differences between them were caused by the air demand to prevent the membrane fouling. The flux and oxygen demand for air scouring were $19.0L/m^2/hr$ and $2.28m^3/min$ for the flat sheet membrane, and $20.7L/m^2/hr$ and $1.77m^3/min$ for the hollow fiber membrane on an average.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.612-614
• /
• 2018

현재 사진으로 모델링데이터를 획득 할 수 있는 기술이 등장하고 있다. 다양한 조형물, 건축 및 캐릭터에 대한 3D 모델링 제작은 많은 시간을 투자하여 제작되고 있다. 콘텐츠산업에서도 많이 활용되고 있는 3D 모델링 제작방식은 정확한 측정 도구 없이 스케치된 도면을 중심으로 제작자의 직감적 감각을 이용하여 모델링데이터를 생성하고 있는 것도 사실이다. 최근에는 사진정보의 조합으로 조형물의 정확한 3차원 데이터를 생성하고 재구성하여 기존 디자인의 변형이나 수정이 용이하게 할 수 있는 기술이 발달하고 있다. 본 논문은 대상물에 대한 여러 장의 사진 데이터를 활용하여 정밀한 3차원 모델링 데이터를 생성하는 방법을 연구하고 이를 활용할 수 있는 방안을 제안한다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.357-360
• /
• 1997

For medical students and doctors, knowledge of the 3-dimensional (3D) structure of the heart is very important in diagnosis and treatment of the heart diseases. 2-dimensional (2D) tools (e.g. anatomy book) or classical 3D tools (e.g. plastic model) are not sufficient or understanding the complex structures of the heart. Moreover, it is not always guaranteed to dissect the heart of cadaver when it is necessary. To overcome this problem, virtual dissection systems of the heart have been developed. But these systems are not satisfactory since they are made of radiographs; they are not true 3D images; they can not be used to dissect freely; or they can only be operated on the workstation. It is also necessary to make the dissection systems incorporating the various races and tribes because of the organ's difference according to race and tribe. This study was intended to make the 3D image of the heart from a Korean cadaver, and to establish a virtual dissection system of the heart with a personal computer. The procedures or manufacturing this system were as follows. 1. The heart from a Korean adult cadaver was embedded with gelatin solution, and serially cross-sectioned at 1mm-thickness on a meat slicer. Pictures or 153 cross-sectioned specimens were inputted into the computer using a digital camera ($756{\times}504$ resolution, true color). 2. The alignment system was established by means of the language of IDL, and applied to align 2D images of the heart. In each of 2D images, closed curves lining clean and dirty blood pathways were drawn manually on the CorelDRAW program. 3. Using the language of IDL, the 3D image and the virtual dissection system of the heart were constructed. The virtual dissection system of the heart allowed or ree rotation, any-directional sectioning, and selected visualization of the heart's structure. This system is expected to become more advanced, and to be used widely through Internet or CD-title as an educational tool for medical students and doctors.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 추계공동학술대회
• /
• pp.437-450
• /
• 2006

The Contour Crafting(CC) process, which has been developed at the University of Southern California, aims at automated construction of whole houses as well as sub-components. For this purpose, new trowel mechanism is basically needed in order to fabricate the true 3D shape. This paper presents our concepts and initial investigation of 3D free form fabrication using the pivoting side trowel. Specifically, the status of research and development of the processand experiments with ceramics materials, and its potential application areas are detailed.

• 터널과지하공간
• /
• 제23권5호
• /
• pp.383-391
• /
• 2013

1960년대 후반 이래로 수행된 여러 진삼축압축시험 결과에 의하면 암석의 파괴강도는 중간주응력의 크기에 상당한 영향을 받는 것으로 나타나고 있다. 이러한 실험적 결과를 바탕으로 지금까지 중간주응력이 파괴에 미치는 영향을 고려할 수 있는 다양한 3차원 파괴조건식들이 제안되고 있다. 그러나 문헌에 보고된 대부분의 3차원 파괴기준식들은 암석의 진삼축압축 강도를 현상학적으로 재현하기 위한 목적으로 개발되었기 때문에 관련된 강도정수들의 역학적 의미가 명확하지 않다. 이 연구에서는 암석강도의 중간주응력 의존성이 암석 내에 포함된 연약면들의 공간적 분포특성과 관련성이 있다는 가능성을 확인하기 위해 평면이방성 암석모델을 대상으로 수치 진삼축압축시험을 수행하였다. 미소구조텐서 개념을 활용하여 이방성 Mohr-Coulomb 파괴기준식을 개발하였으며 이를 강도기준식으로 활용하고 임계면법을 적용하여 평면이방성 암석의 파괴강도 및 파괴면 방향의 중간주응력 의존성을 분석하였다. 분석결과는 암석에 포함된 미시적 연약면들의 주응력 방향에 대한 방향성이 암석강도의 중간주응력 의존성과 밀접한 관련성이 있음을 암시해준다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.241-244
• /
• 2003

The world largest 21.3" LTPS LCD has been successfully developed using SLS crystallization technology. Successful integration of gate circuit, transmission gate and level shifter was performed in a large area uniformly. Uniformity and high performance from high quality grains of SLS technology make it possible to come true a uniform large size LTPS TFT-LCD with half number of data driver IC's used in typical a-Si LCD. High aperture ratio of 65% was obtained using an organic inter insulating method, which lead a high brightness of 500cd/cm2.

• 한국콘텐츠학회:학술대회논문집
• /
• 한국콘텐츠학회 2006년도 추계 종합학술대회 논문집
• /
• pp.278-281
• /
• 2006

콘텐츠 산업, 특히 게임콘텐츠 분야에서 가장 각광을 받고 있는 분야가 바로 3D이다. 게임에서 양적, 질적 발전이 되어가면서 3D에 대한 관심은 더욱 커져가고 있다. 이에 따라 게임산업에서 3D분야에 대한 연구와 실제 적용이 가장 많이 이루어지고 있다. 게임상의 3D 캐릭터는 예전의 2D 캐릭터에 비하여 동작의 자연스러움이 떨어져있던 것이 사실이다. Key Frame 방식의 동작 제어의 한계를 극복하기 위하여 현재 급격히 떠오르고 있는 것이 모션 캡쳐 시스템을 활용한 동작 제어 방법이다. 본 논문에서는 3D 게임캐릭터와 모션 캡쳐 시스템의 연동을 통한 동작 제어를 통하여 자연스러운 캐릭터 애니메이션 제작에 중점을 두고 있다. 이에 하나의 중심적인 액션(타격-打擊)을 통하여 자연스러운 3D 게임 캐릭터 애니메이션을 제작하는 것을 목표로 하였다.

• Geomechanics and Engineering
• /
• 제17권4호
• /
• pp.385-392
• /
• 2019

The present fractional-order plasticity models for granular soil are mainly established under the triaxial compression condition, due to its difficult in analytically solving the fractional differentiation of the third stress invariant, e.g., Lode's angle. To solve this problem, a three dimensional fractional-order elastoplastic model based on the transformed stress method, which does not rely on the analytical solution of the Lode's angle, is proposed. A nonassociated plastic flow rule is derived by conducting the fractional derivative of the yielding function with respect to the stress tensor in the transformed stress space. All the model parameters can be easily determined by using laboratory test. The performance of this 3D model is then verified by simulating multi series of true triaxial test results of rockfill.