• 한국화재소방학회논문지
• /
• 제17권2호
• /
• pp.17-24
• /
• 2003

본 논문은 파스콘 또는 콘크리트 재질의 트로프에 설치되는 전선에 대한 열의 영향과 이들 트로프에 대한 열 방출 정도에 대한 차이점을 이론상으로 접근하고 평가하고자 하였으며, 실제 상황과 근접한 조건으로 컴퓨터 시뮬레이션을 실시함으로서 두 트로프 내의 전선에 대한 열의 영향과 두 트로프의 열 발산정도를 추정하고 그에 대한 타당성을 입증하고자 하였다. 이에 대한 연구 결과 파스콘의 고유 열전도 값과 콘크리트의 고유 열전도 값을 단순 비교하면 콘크리트 제품의 열 방출량이 우수한 것으로 판단할 수 있으나, 실제 설치되는 두 트로프의 실제 두께와 면적 및 세부 구조를 고려하여 연산 및 시뮬레이션을 실시해 본 결과 파스콘 트로프가 콘크리트 트로프 보다 다소 우위에 있는 것으로 평가되었다.

• 치과방사선
• /
• 제21권1호
• /
• pp.137-143
• /
• 1991

In the study of the focal trough of panoramic radiograph using Panoura Eight-S (the Yoshida company), a series of 63 X-ray films were taken with the 8-19 metal pins placed in the holes of the plastic model plate and evaluated by 4 observers. The author analized the focal trough defined by the sharpness criteria and calculated dimension of focal trough in the horizontal plane. The results were as follows; 1. Focal trough was not continued in the anterior region within a very high degree of sharpness. 2. With optional sharpness, the width of anterior and posterior focal trough was approximately l3㎜ and 60㎜ respectively. 3. The focal trough was narrow in the anterior region and was flared laterally with symmetry in posterior region. 4. Sharp image began to show at the position of 18㎜ posteriorly from the most anterior position of chin rest.

• 치과방사선
• /
• 제12권1호
• /
• pp.115-121
• /
• 1982

In the study of the focal trough of panoramic radiograph, using the Moritta compony Panex-EC a series of 48 exposures were: taken with the 6-18 brass pins placed in the holes of the plastic model plate, then eveluated by 4 observers. The author analyzed the focal trough defined by the sharpness criteria and calcuated the vertical and horizontal magnification range in the corrected focal trough. The results were as follows; 1. Continuous focal trough was not defined in the anterior region using a very high degree of sharpness. 2. As degree of sharpness used in the analysis became less, focal trough was continuous in the anterior and posterior regions, symmetrized bilaterally, and the widths of the focal trough increased more in the posterior region. e. As sharpness criteria were reduced, the percentage range of image magnification increased on both vertical and horizontal magnification, and especially the percentage range of horizontal magnification was greater than that of vertical magnification.

• 한국화재소방학회논문지
• /
• 제16권1호
• /
• pp.51-59
• /
• 2002

신소재 PASCON케이블 트로프로서의 여러 가지 물성을 평가하고, 국내 내연성 시험방법의 적합성을 고찰하였으며, 특히 고속철도 선로변에 사용한 PASCON 케이블 트로프의 법적 타당성과 화재안전성에 대한 연구를 통해 PASCON재질의 적합성을 살펴보았다. 연구결과 국내에서 적용하고 있는 PASCON 케이블 트로프의 재질에 대한 내연성 시험방법(KS M3015)은 국제적인 시험방법(UL 94)과 큰 차이가 없으며, 시험 결과 우수한 성능을 나타내었다. 또한 고속철도 선로변에 설치된 PASCON 케이블 트로프 내에서의 화재 발생시 화재에 대한 확산 경로로서의 가능성이 매우 작으며, 화재에 대한 안전성 또한 매우 높은 것으로 나타났다.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.179-187
• /
• 2002

The Ayu Trough, located in the southern end of the Philippine Sea, represents a divergent boundary between the Philippine Sea and the Caroline Plates. A detailed geophysical survey was carried out in the Ayu Trough by R/V Onnuri. Topographically, the Ayu Trough resembles an slow spreading ridge. The trough can be divided into three sections: the south $(0^{\circ}-1^{\circ}30'N),\;middle\;(1^{\circ}30'-4^{\circ}N)$, and north $(4^{\circ}-6^{\circ}30'N)$. The seafloor in the middle section is characterized by features asymmetric with respect to the axis. These features were probably produced by NW-SE and NNW-SSE extensions and seem to support the argument that the opening of the Ayu Trough occurred in an oblique fashion. Farther south, a long transform fault but with a short offset defines the boundary between middle and southern sections. The axial depth increases a stepwise to the south of $1^{\circ}30'N$. A clear difference can be seen between the southern and middle sections with the latter exhibiting much higher mantle Bouguer anomaly values in the axial region. The anomaly indicates that the axial crust perhaps experienced a much higher degree of extension in the middle than in the southern section. The analyses of magnetic field data reveal that the region beyond 100km exhibits considerable variations, whereas the magnetic anomalies within 100km from the trough axis are very much subdued. This observation suggests that the opening of the Ayu Trough involved an initial stage of rifting of existing volcanic arcs, followed by production of new seafloor.

• 대한기관식도과학회:학술대회논문집
• /
• 대한기관식도과학회 1995년도 이비인후과 종합학술대회 초록집
• /
• pp.89.2-89
• /
• 1995

일반적으로 기관협착의 치료는 기관절재후 단단문합술로 가능하나 광범위한 기관협착이 발생하였을 때는 그 치료가 매우 어렵다. 이경우는 기도전벽을 개방하여 경부 피부와 기관연을 봉합하는 Trough를 형성한 뒤 이차적으로 연골이식이나 경부 피부를 이용한 피판을 만들어서 기관을 재건하는 Trough방법이 주로 적용되고 있다. 이 때 이식되는 연골은 늑연골 이나 비중격 연골이며 측벽의 재건에는 늑연골이 좋고 전벽의 재건에는 점막이 붙어 있는 비중격 연골의 복합이식편이 사용될 수 있다. 본 교실에서는 기관 절제 후 단단문합술이 불가능하였던 5명의 환자에서 Trough방법을 이용하여 기관 재건에 성공하였기에 그 결과를 보고하고자 한다.

• Archives of Plastic Surgery
• /
• 제33권3호
• /
• pp.335-340
• /
• 2006

Lower palpebral bags and tear trough grooves are the common signs of aging. Weakness of the orbital septum, atrophy of the orbicularis oculi muscle, slackness and laxity of the lower lid skin are the main causes of these aging changes. Tear trough groove with skeletonization of the lower orbital rim can not be corrected easily by the conventional lower blepharoplasty, but the augmentation of the volume, can be an effective method. Lower lids provide a well vascularized recipient site, which is vital for proper grafting of fat to occur. We treated tear trough groove with free fat graft of surgically removed orbital fat. Surgical excision of the fat pad and septal reinforcement with free fat graft below the levator labii superioris alaeque nasi muscle were performed to correct tear trough groove. This technique was performed in 29 consecutive individuals from October, 2001 to January, 2005. Palpebral bags and tear trough groove were corrected concomitantly and obtained a youthful attractive midface with no secondary hollowness of lower lid and irregularity. The overall results obtained were satisfactory without any complications. Recurrence of tear trough deformity due to grafted fat absorption was not noted during the 7 months of the follow-up period. The authors conclude that the procedure is safe and effective in selected patients.

• 천문학회보
• /
• 제37권2호
• /
• pp.126.1-126.1
• /
• 2012

The middle-latitude ionization trough, the plasma density depletion in the subauroral region, has been extensively studied since its discovery in the 1960s. Our knowledge of the variability of the trough is mostly based on the observations in the northern hemisphere. Recently, the COSMIC observations enabled the investigation of the trough in both hemispheres at all local time. However, the investigation was limited to the period of the low solar activity. In this study, we investigate the variability of the trough location and morphology with local time, solar cycle, magnetic activity, and interplanetary magnetic field. For this purpose, we analyze the DMSP F15 data acquired during 2000-2010.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.1168-1170
• /
• 1993

EHV underground transmission cable characterized by low loss and bulk capacity should have high reliability to be protected fully from external damages, not to speak of its quality. In 345kV underground transmission lines of our country, the usage of frie protection trough is standardized. Fire protection trough consists of combination of trough body, spacer, shutting board, fastener, and etc. and it is required to have a high level of fire-retardant characteristics and mechanical strength. Since 1992, we, GoldStar Cable, with collaboration of Lucky, have participated in the development of fire protect ion trough and completed the type test of manufacturing site and will be supposed to go into mass product within 1993.

• Ocean and Polar Research
• /
• 제24권3호
• /
• pp.189-196
• /
• 2002

A multichannel seismic survey was conducted in the southern Ayu Trough which is the only spreading boundary between the Philippine Sea and Caroline plates. The seismic system used in this study comprises of 2.46-l sleeve gun and a 12-channel streamer with a group interval of 6.25m. Migration technique was used to analyze seismic velocity, and poststack depth migration was applied to the stacked data. The sediment thickness obtained from the depth section tends to increase with distance from the spreading axis. Sedimentation rates are poorly constrainted in the study area. The apparent half-spreading rates estimated from the sediment thickness and sedimentation rate from DSDP hole on the caroline plate are 4.7mm/yr and 7.9mm/yr at $1^{\circ}24'N\;and\;0^{\circ}42'N$, respectively, which are fester than Previously suggested. On the basis of new oblique spreading geometry, the recalculated spreading rates are 5.4mm/yr and 9.1mm/yr at $1^{\circ}24'N\;and\;0^{\circ}42'N$, respectively. Seismic sections show that the topography is asymmetric across the Ayu Trough and the acoustic basement is rough. These features are consistent with the earlier suggestion that the Ayu Trough is a slow-spreading divergent boundary. A detailed examination of seismic profiles away from the axis shows that sediments can be divided into two layers which implies a possible change in the spreading rate anuor sedimentation condition during the formation of the trough.