• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.64-65
• /
• 2007

High-efficiency white organic light-emitting diodes (WOLEDs) were fabricated with two emissive layers and exciton blocking layer was sandwiched between two phosphorescent dyes which were, bis(3,5-Difluoro-2-(2-pyridyl)phenyl-(2-carboxypyridyl) iridium III (Flrpic) as blue emission and a newly synthesized red phosphorescent material guest, Bis(5-benzoyl-2-phenylpyridinato-C,N)iridium(III) (acetylacetonate) ((Bzppy)2Ir(III)acac). This exciton blocking layer prevents a triple-triple energy transfer between the two phosphorescent emissive layers with balanced emission of blue and red. The white device showed the Commission Internationale d'Eclairage (CIEx,y) coordinates of (0.34, 0.40) at the maximum luminance of $24100\;cd/m^2$ and maximum luminous efficiency of 22.4 cd/A, respectively.

• 한국전기전자재료학회논문지
• /
• 제17권4호
• /
• pp.443-447
• /
• 2004

In this study, we investigated the necessity of encapsulation layer to maximize flexibility of brittle indium-tin-oxide (ITO) on polymer substrates. And, Young's modulus (E) of encapsulation layer han a significant effect on external bending stress and the coefficient of thermal expansion (CTE) of that han a significant effect on internal thermal stress. To compare the magnitude of total mechanical stress including both bending stress and thermal stress, the mechanical stress of triple-layer structure (substrate / ITO / encapsulation layer or substrate / buffer layer / ITO) can be quantified and numerically analyzed through the farthest cracked island position. As a result, it should be noted that multi-layer structures with more elastic encapsulation material have small mechanical stress compared to that of buffer and encapsulation structure of large Young's modulus material when they were externally bent.

• 한국전기전자재료학회논문지
• /
• 제21권2호
• /
• pp.173-177
• /
• 2008

We have developed the transparent passivation layer for top emission organic light emitting diodes using CsCl thin film by the thermal evaporation method. The CsCl film was deposited on the Ca/Ag semitransparent cathode. The optical transmittance of Ca/ Ag/CsCl triple layer is higher than that of Ca/Ag double layer in the visible range. The device with a structure of glass/Ni/2-TNATA/a-NPD/Alq3:C545T/BCP/Alq3/Ca/Ag/CsCl results in higher efficiency than the device without CsCl passivation layer. The device without CsCl thin film shows a current efficiency of 7 cd/A, whereas the device passivated with CsCl layer shows an efficiency of 10 cd/A. This increase of efficiency isresulted from the increased optical extraction by the CsCl passivation layer.

• Journal of Biosystems Engineering
• /
• 제16권3호
• /
• pp.248-262
• /
• 1991

Simulation model was developed to analyze drying process for tray type red pepper dryer and validated by experiments. This model could predict satisfactorily temperatures and moisture contents of red pepper and temperatures of drying air during drying. Optimize algorithm was developed to search control valiables (drying air temperature, air recycle ratio and air flow rate) of red pepper dryer based on a criterion of minimizing energy consumption under the constraint conditions that statisfied carotenoid retension of at least 210mg per 100g dry matter, the moisture content of bottom layer of 15% (d.b) and drying time of less than 35 hours. Step changes in drying air temperature and air recycle ratio were considered in the optimization. In single step in control variables, the difference of the moisture content between top layer and bottom layer was great and more fan power was required. As the drying trays were exchanged when the moisture content of bottom layer reached to 100% (d.b), fifty percent of energy was saved and the difference of moisture content was little. In double step changes in control variables, optimal conditions were found by changing the step when the moisture content of bottom layer reached to 100% (d.b) (about 19.8 hours from starting drying). Optimum air flow rate was $18.1cmm/m^2$. Optimum drying air temperature and air recycle ratio in the first step was $55.8^{\circ}C$ and 0.80, and in the second step $65.6^{\circ}C$ and 0.88, respectively. In triple step changes in control variables, the optimal conditions were found by changing the steps when the moisture content of bottom layer reached to 250% (d.b) and 150% (d.b). Optimal air temperatures were $66.2^{\circ}C$, $58.4^{\circ}C$ and $66.9^{\circ}C$, and optimal air recycle ratios were 0.778, 0.785, 0.862 at each step, respectively. Optimal air flow rate was $18.9cmm/m^2$. The best operating mode was triple step mode considering energy consumption, drying time, fan power, and quality of dried red pepper. When the triple step mode was used to dry the red pepper, the energy consumption was about 16.5%~57.2% less than that of the single step mode and the drying time was 6.6 hours shorter than that of the double step mode.

• 한국구조물진단유지관리공학회 논문집
• /
• 제28권1호
• /
• pp.39-45
• /
• 2024

경주 및 포항지진으로 인한 지하매설배관의 파열 및 누수가 발생하여 내진 안전성 확보의 중요성이 증대되고 있다. 배관시스템의 내진 확보를 위해 금속 벨로우즈 신축관이음이 적용되고 있다. 금속 벨로우즈는 일련의 주름 형상으로 제작되어 비교적 낮은 강성으로 유연하게 변형으로부터 대응한다. 금속 벨로우즈의 목적에 따라 다양한 주름 형상과 겹 수로 제작되고 이와 관련한 다양한 연구가 수행되었다. 하지만 산높이가 복합적인 벨로우즈의 전단 거동에 대한 내진성능을 평가한 연구는 미비하다. 따라서 본 연구는 복합적인 산 높이로 구현된 벨로우즈의 전단 내진성능을 분석하기 위한 단조하중실험, 점증반복하중실험 및 피로반복실험을 수행하였다. 실험은 한 겹 및 세 겹으로 제작된 벨로우즈를 대상으로 수행하였으며, 한 겹 보다 세 겹으로 제작된 벨로우즈의 최대 변형 및 피로 수명이 높은 것으로 평가되었다. 하지만 세 겹의 벨로우즈는 내압에 비해 높은 강성으로 주름산의 변형이 더 낮은 변위에서 발생하며, 복합적인 주름산의 높이와 관련하여 특정 조건에서는 누수가 빠르게 발생하였다. 피로 수명은 낮은 변형률에서 많은 겹 수의 벨로우즈가 높게 평가되었고, 높은 변형률에서는 동일한 피로 수명으로 수렴하였다.

• 대한전자공학회논문지
• /
• 제22권6호
• /
• pp.53-57
• /
• 1985

APCVD SiO2 또는 PSG 및 PECVD SiN막으로 구성된 이중 또는 삼중층의 반도체 표면보호막 구조의 특성을 층배합방법, 두께 등이 다른 여러 경우에 대하여 비교분석하였다. 문턱전압의 변동, 크랙 및 핀·홀의 발생, 내습성 등의 성질을 검토한 결과, 4,000Å 이상의 두께를 가진 PSG막과 6,000Å 두께의 SiN막으로 된 이중층이 표면보호막 구조로 가장 적합하다는 결론을 얻었다.

• 한국항해학회지
• /
• 제15권4호
• /
• pp.13-25
• /
• 1991

Recently, according to the development of electromagnetic wave technique, more frequent and powerfull wave radiation becomes inevitable and so electromagnetic environments has become worse accordingly. Electromagnetic wave absorber is known the most effective preventive remedy to cope with the EMI/EMC problem. To realize broad-band electromagnetic wave absorber, triple layered structure where an air layer is interposed between a sintered ferrite layer and a ruber ferrite layer was adopted. Computer simulation for optimum design and evaluation of absorption characteristics has been made. The results shows that designed broad-band electromagnetic wave absorber can be useful for EMI/EMC problem, especially reducing TV ghosts in both VHF and UHF bands by additionally an air layer and a thin rubber ferrite layer on the surface of conventional ferrite, without replacing it.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2009년도 동계학술발표회 논문집
• /
• pp.277-277
• /
• 2009

• 한국태양에너지학회 논문집
• /
• 제30권4호
• /
• pp.29-35
• /
• 2010

This study has been carried out empirical research on Transparent Thin-film BIPV modules, BIPV modules installed on the exterior of the building are applied a laminated module 1kWp, double-glazing module 3kWp and triple-glazing module 1kWp. Applied to the total capacity of BIPV modules are 5kWp. In this study, design and construction process of BIPV systems is presented. In addition, through monitoring of the BIPV system, the temperature and the power characteristics of each module were analyzed. During the measurement period, the module temperature measurement results, the maximum surface temperature of $51.5^{\circ}C$ triple-glazing BIPV module showed the highest, followed by double-glazing BIPV module $49.1^{\circ}C$, $44.7^{\circ}C$ laminated modules, respectively. Power output results, the daily average double-layer modules showed 4.10kWh/day, triple-glazing module 1.57kWh, respectively 1.81kWh laminated modules. In particular, the power efficiency of triple-glazing BIPV module was lower than the power efficiency of the laminated BIPV module. This phenomenon is considered to be affected by the module temperature. In the future, BIPV modules in this study the relationship between module temperature and power characteristics plans to identify.

• 대한전자공학회논문지SD
• /
• 제48권2호
• /
• pp.67-72
• /
• 2011

삼중대역(2.3/2.5/3.5GHz) m-WiMAX 시스템의 제작을 위한 8층의 인쇄회로기판을 제작하였다. 고주파 동작시에도 우수한 성능을 확보하기 위하여 저유전율을 사용한 인쇄회로기판을 제작하였다. 또한 시스템 전체의 크기를 축소하기 위하여 수동소자를 삽입시킨 임베디드 인쇄회로기판을 제작하였다. 그 결과 시스템 면적의 9%를 줄일 수 있었다. 제작된 인쇄회로기판을 사용하여 삼중대역 m-WiMAX 시스템이 제작되었으며, 인터넷 연결 테스트를 성공적으로 수행하였다. 개발된 임베디드 인쇄회로기판은 시스템의 면적 축소와 저신호 손실 RF 통신 시스템에 효과적인 대응을 가능하게 할 것이다.