• Proceedings of the KIPE Conference
• /
• 1996.06a
• /
• pp.43-46
• /
• 1996

The carborne Automatic Train Control(ATC) system keeps automatically optimum train speed code signals from wayside(track) circuit equipment. If there is no response for braking against the over speed detected, the driver will be noticed instantly by visual and audible warning signals. And then the ATC processes into braking mode for safe train operations to prevent any hazards by over speed limit. In this paper we are introduced the novel ATC system which has triple constructed structure made by 32 bit floating point DSP(ADSP21020-20) and process dealed with frequency domain and time domain for detecting signals. Owing to these reason it is no needed several band pass filters used in conventional ATC systems to detect the speed limit frequency. Also system's reliability and tolerance are incremented by adopt to 2 out of 3 logic to the outputs decision.

• ETRI Journal
• /
• v.36 no.1
• /
• pp.163-166
• /
• 2014

A microstrip dual-wideband bandpass filter using a multimode resonator (MMR) is proposed in this letter. The proposed MMR loaded with a T-shaped open-ended stub and a short-ended stub exhibits triple mode characteristics, and a synthesis method is developed to illustrate the wide passband with independently controllable center frequencies and bandwidths. To verify this design methodology, a dual-wideband filter with fractional bandwidths of 19.1% and 27.9% is designed and fabricated. The measured results agree with the simulations.

• Proceedings of the KAIS Fall Conference
• /
• 2009.12a
• /
• pp.977-980
• /
• 2009

본 논문에서는 GSM/DCS/PCS대역에서 사용할 수 있는 변형된 IFA형태의 내장형 안테나를 설계하고 이를 제작하였다. 본 논문에서는 실제 상용화된 휴대단말기의 내장형 안테나를 3D Tool을 이용하여 전류 흐름의 상쇄작용을 고려하여 3중 대역을 형성시켰으며, Stub의 길이에 따라 변화하는 반사소실 특성을 확인하였다. 설계된 안테나를 제작 측정한 결과 기존의 안테나 보다 약 10.9%, 1.57dB 특성이 개선되었다.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.454-457
• /
• 2008

We report the syntheses, photophysical properties and device performances of solution processible host material for green-phosphorescent OLEDs. The butterfly-shaped new host materials with nonconjugated linkage of carbazole and fluorene moieties have large triple energy band gap around 2.8 eV. All of the EL devices exhibited turn-on voltages in the range of 4.8-5.0 V. GH-4 exhibited the best performance with a maximum current efficiency and power efficiency of 21.1 cd/A and 7.9 lm/W.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.5
• /
• pp.34-41
• /
• 2008

This paper describes the design of SP3T PIN diode switch which has a 500W high power handling capability in $20{\sim}400MHz$ frequency range. Design factors were investigated and it was confirmed by simulation that the characteristics of insertion loss, VSWR, and isolation met design goal. Also, the capability to handle 500W high power with very fast switching speed of less than $26{\mu}s$ was confirmed and insertion loss of less than 1dB, VSWR of less than 1.4:1, and isolation of higher than 60dB were obtained by experiments.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.207-210
• /
• 2008

본 논문에서는 휴대폰 GSM850/1800/1900 대역용 폴더폰 IFA를 설계하고 이를 제작하였다. 안테나의 전류 밀도의 증가를 위해 브랜치 구조로 설계함으로서 안테나의 효율 증가를 야기 시킨다. 안테나 효율 증가에 대한 실험은 기존의 GSM850/1800/1900 대역에 사용하는 휴대폰에 적용하여 제반 특성을 측정한다. 측정결과 폴더 닫힘 때 1.22dB, 폴더 열림 때 1.35dB 향상됨을 보인다.

• Proceedings of the KAIS Fall Conference
• /
• 2008.11a
• /
• pp.294-296
• /
• 2008

본 논문에서는 변형된 Monopole 안테나에 의한 GSM 900, 1800, 1900 3중 대역 BAR TYPE 형 휴대폰내장형 안테나를 설계 및 제작 하였다. 본 논문은 실제 상용화된 휴대 단말기의 내장형 안테나를 Monopole 타입으로 설계하여 현재 상용 중인 안테나에 부합하는 특징을 가지도록 하였다. 설계된 안테나를 제작 측정한 결과 기존의 안테나 보다 약 5.51% 1.39dB 특성이 개선되었다.

• Proceedings of the KAIS Fall Conference
• /
• 2005.05a
• /
• pp.163-165
• /
• 2005

본 논문에서는 GSM/DCS/USPCS 대역에서 사용할 수 있는 PIFA 형태의 내장형 안테나를 설계하고 이를 제작하였다. 이 안테나는 제한된 공간에서 기본 PIFA에 적절한 슬릿을 구성하여 트리플 밴드를 형성 시켰으며, GSM 대역에서 Maximum Gain -3.25dB$\~$6.37dB, DCS 대역에서 Maximum Gain -0.46dB$\~$2.95dB의 결과를 얻었다. 방사패턴 또한 전 방향성에 가까운 특성을 가지고 있으며 현재 GPRS용 휴대폰에 적용시키고 있다.

• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.41-42
• /
• 2006

In this paper, we propose a rapid asynchronous UWB (Ultra Wide Band) position location scheme based on double RTTs (Round-Trip Transmissions). In the proposed scheme, to avoid performance degradation of the position location in harsh multipath channel environments where LoS (Line-of-Sight) components are not always guaranteed, the remaining RTT information is solved from realistic double RTTs. Simulation results in IEEE 802.15.4a UWB channel models reveal that the proposed scheme can achieve closely comparable position location accuracy of the conventional ToA (Time of Arrival) method based on triple RTTs, while reducing the processing delay required for the calculation of the position locations.

• Journal of electromagnetic engineering and science
• /
• v.13 no.4
• /
• pp.214-223
• /
• 2013

This paper proposes a theoretical analysis of hidden device detection and a design of multiband circular polarization patch array antenna for non-linear junction detector system application. A good axial ratio of circular polarization patch antenna is realized by a new approach that employs inclined slots, two rectangular grooves and a truncated ground for the conventional antenna. A good axial ratio of the 1.5 dB lower is measured by having an asymmetric gap distance between the ground planes of the coplanar waveguide feeding structure. The common ground plane of the linear array has an optimum trapezoidal slot array to reduce the mutual coupling without increasing the distance between the radiators. The higher gain of about 1 dBi is realized by using the novel common ground structure. The measured return loss, gain, and axial ratio of the proposed single radiator, as well as the proposed array antennas, showed a good agreement with the simulated results.