• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.12
• /
• pp.2210-2216
• /
• 2007

In this paper, triple-band plastic chip antennas for mobile terminal are investigated. Plastic chip antenna is composed of Foamex material with circle of PVC(Polyvilyl chloride). For its electric characteristics, the dielectric constant is 1.9, the insulation intensity is 112KV/cm. Plastic chip antennas are don't tend to break easily against to external shock, have more gain and efficiency than ceramic chip antennas. Triple-band plastic chip antennas of four type are implemented and experimented. From the experiments results, the antenna resonate at the triple-band, the gain of the antennas has about above -2dB, the pattern is ommidirectional the same as the conventional antennas. So, the antennas realized with Foamex material will be application for mobile phone antenna operated at the triple band which is cellular band and Korea-PCS band and ISM band or the antenna for other wireless communication system.

• Journal of Advanced Navigation Technology
• /
• v.26 no.1
• /
• pp.29-34
• /
• 2022

In this paper, the design of a triple dipole quasi-yagi antenna operating in the 2.45 GHz and 5 GHz wireless LAN frequency bands and the 3.5 GHz WiMAX frequency band was studied. The proposed quasi-Yagi antenna consists of three dipoles connected in series with a V-shaped ground plane. The longest half-bow-tie-shaped dipole resonates in the 2.45 GHz band, whereas the medium-length dipole resonates at 3.5 GHz. The shortest dipole resonates in the 5 GHz band. By adjusting the length and width of the dipoles and the spacings between the dipoles, a triple-band directional antenna operating in the 2.45 GHz, 3.5 GHz, and 5 GHz bands are designed, and fabricated on an FR4 substrate with a size of 45 mm × 55 mm. It was confirmed that the fabricated antenna operates in the designed triple bands of 2.32-2.57 GHz, 3.26-3.69 GHz, and 4.50-6.56 GHz for a voltage standing wave ratio less than 2. Gain is maintained above 3 dBi in the three bands.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.10
• /
• pp.1427-1434
• /
• 2013

In this paper, triple band mobile chip antenna for DCS(1.71~1.88GHz) / PCS(1.75~1.87GHz) / UPCS(1.85~1.99GHz) on PCB Layout is designed. To analyze the characteristics of the designed antenna, we designed and measured Single, Dual, Triple Band antenna. The designed antenna was fabricated and measured using vector network analyzer in LTK(Laird Technologies Korea). Triple and wide band characteristic could be realized the measured bandwidth(V.S.W.R<2.0) of designed antenna operated in the band of 1.71GHz~1.99GHz. This antenna has a small size of about $19mm{\times}4mm{\times}1.6mm$, narrow bandwidth which is a defect of chip antenna is improved. And its experimental results were a good agreement with simulation performance.

• Journal of information and communication convergence engineering
• /
• v.6 no.2
• /
• pp.172-176
• /
• 2008

This paper presents a novel feeding structure of the triple-band internal antenna which covers CELLVLAR/DCS/US-PCS bands. The proposed antenna consists of a U-slot patch radiator with a shorting post connected with ground plane and symmetric feeding lines with respective a feeding and shorting posts on both faces of the fixed FR-4 substrate. Through the simulation and experimental results, the proposed antenna is confirmed to have the features of less interference with a human head/body, broad bandwidth, desirable radiation patterns and efficiency for triple-band applications.

• Journal of information and communication convergence engineering
• /
• v.13 no.3
• /
• pp.159-166
• /
• 2015

In this paper, a novel design for a triple-band coplanar waveguide (CPW)-fed monopole antenna for WLAN/WiMAX operations is proposed. The proposed antenna is printed on an FR4 substrate with an area of 22.0 mm × 30.0 mm, a thickness of 1.0 mm, and a relative permittivity of 4.4. The effects of various parameters of the proposed for triple band operation is investigated. Two half circular rings and a microstrip feed line are fabricated on the substrate to achieve triple band operation and good impedance matching. Prototypes of the proposed antenna have been fabricated and tested. Experiment results reveal that the measured return loss exhibits an acceptable agreement with the simulated return loss and satisfies the impedance bandwidth requirement of -10 dB, while simultaneously covering the WLAN and WiMAX bands. In addition, the proposed antenna shows good radiation characteristics and gains in the three operating bands.

• Journal of electromagnetic engineering and science
• /
• v.4 no.1
• /
• pp.8-12
• /
• 2004

In this paper, a triple-band printed dipole antenna using parasitic elements is proposed for the multiple wireless services. The proposed antenna is designed and experimentally analyzed at the bands of PCS, IMT-2000, and ISM services. To achieve triple frequency operation, the proposed antenna contains two parasitic elements, which act as additional resonators by coupling from the driving dipole antenna. From the measured results, the resonant frequencies of this antenna are 1.79 ㎓, 2.03 ㎓, and 2.41 ㎓ and the measured impedance bandwidths are 90 MHz(1760∼1850 MHz), 210 MHz(1,930∼2,130 MHz), and 30 MHz(2,400∼2,430 MHz) for VSWR<2. The measured antenna gains are 2.14 ㏈i, 0.9 ㏈i, and 0.5 ㏈i, respectively. Antenna parameters for trifle-band operation are investigated and several antenna characteristics are discussed.

• Journal of electromagnetic engineering and science
• /
• v.14 no.4
• /
• pp.367-375
• /
• 2014

In this paper, a novel triple-band circular-ring monopole antenna with a half-circular ring and ground slot for wireless local area network/Worldwide Interoperability of Microwave Access (WLAN/WiMAX) applications is proposed. The proposed antenna consists of one circular ring, a half-circular ring and a rectangular slot in the ground plane. Based on the concept, a prototype of the proposed triple-band antenna was designed, fabricated and tested. The numerical and experiment results demonstrated that the proposed antenna satisfied the -10 dB impedance bandwidth requirement while simultaneously covering the WLAN and WiMAX bands. Furthermore, this paper presents and discusses the 2D radiation patterns and 2D gains according to the results of the experiment.

• 한국ITS학회:학술대회논문집
• /
• 2010.05a
• /
• pp.104-106
• /
• 2010

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.506-510
• /
• 2016

A triple-band (TB) oscillator was implemented in the TSMC $0.18{\mu}m$ 1P6M CMOS process, and it uses a cross-coupled nMOS pair and two shunt $4^{th}$ order LC resonators to form a $6^{th}$ order resonator with three resonant frequencies. The oscillator uses the varactors for band switching and frequency tuning. The core current and power consumption of the high (middle, low)- band core oscillator are 3.59(3.42, 3.4) mA and 2.4(2.29, 2.28) mW, respectively at the dc drain-source bias of 0.67V. The oscillator can generate differential signals in the frequency range of 8.04-8.68 GHz, 5.82-6.15 GHz, and 3.68-4.08 GHz. The die area of the triple-band oscillator is $0.835{\times}1.103mm^2$.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.12
• /
• pp.1655-1660
• /
• 2014

In this paper, we propose a design of a triple-band microstrip circular patch antenna. The proposed antenna generates the triple frequency resonance at 1.85GHz(LTE), 2.45GHz(ISM) and 5.5GHz(WLAN). Firstly, we design the dual-band antenna. The dual-band antenna consist of the circular patch, slits, and the slot. The circular patch and slot are designed for dual frequency of 2.45GHz and 5.5GHz, respectively. And then the dual-band antenna is combined with additional arm-shaped structure for the triple-band characteristic. The arm-shaped structure is operated as the dipole. It is designed for lowest frequency of 1.85GHz. Each part of the antenna unites to a new structure. In order to design the proposed antenna automatically and optimally, APSO algorithm is adopted. During APSO, the mismatch of the proposed antenna is resolved. The optimal designed antenna has an acceptable return loss(-10dB) at each bands(i.e, 1.85GHz, 2.45GHz and 5.5GHz).