• Journal of the Korean Institute of Intelligent Systems
• /
• v.16 no.5
• /
• pp.594-600
• /
• 2006

The optimization has been performed to search an economical running pattern in the view point of trip time and energy consumption. Fuzzy control model has been applied to build the meta-model. To identify the structure and its parameters of a fuzzy model, fuzzy c-means clustering method and differential evolutionary scheme ate utilized, respectively. As a result, two meta-models for trip time and energy consumption are constructed. The optimization to search an economical running pattern is achieved by differential evolutionary scheme. The result shows that the proposed methodology is very efficient and conveniently applicable to the operation of railway system.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.2
• /
• pp.167-181
• /
• 1995

We develop an analytical model to estimate the time a workpiece spends in both input and output queues in trip-based material handling systems. The waiting times in the input queues are approximated by M/G/1 queueing system and the waiting times in the output queues are estimated using the method discussed in Bozer, Cho, and Srinivasan [2]. The analytical results are tested via simulation experiment. The result indicates that the analytical model estimates the expected waiting times in both the input and output queues fairly accurately. Furthermore, we observe that a workpiece spends more time waiting for a processor than waiting for a device even if the processors and the devices are equally utilized. It is also noted that the expected waiting time in the output queue with fewer faster devices is shorter than that obtained with multiple slower devices.

• International Journal of Highway Engineering
• /
• v.14 no.4
• /
• pp.163-173
• /
• 2012

PURPOSES : The purpose of this study is to check the possibilities of traffic pattern analysis using MatSIM for urban road network operation in incident case. METHODS : One of the stochastic dynamic models is MatSIM. MatSIM is a transportation simulation tool based on stochastic dynamic model and activity based model. It is an open source software developed by IVT, ETH zurich, Switzerland. In MatSIM, various scenario comparison analyses are possible and analyses results are expressed using the visualizer which shows individual vehicle movements and traffic patterns. In this study, trip distribution in 24-hour, traffic volume, and travel speed using MatSIM are similar to those of measured values. Therefore, results of MatSIM are reasonable comparing with measured values. Traffic patterns are changed according to incident from change of individual behavior. RESULTS : The simulation results and the actual measured values are similar. The simulation results show reasonable ranges which can be used for traffic pattern analysis. CONCLUSIONS : The change of traffic pattern including trip distribution, traffic volumes and speeds according to various incident scenarios can be used for traffic control policy decision to provide effective operation of urban road network.

• Journal of Korean Society of Transportation
• /
• v.23 no.3 s.81
• /
• pp.35-47
• /
• 2005

This paper is to review a literature concerning Bus Transit Route Network Design(BTRNDP), to describe a future study direction for a systematic application for the BTRNDP. Since a bus transit uses a fixed route, schedule, stop, therefore an approach methodology is different from that of auto network design problem. An approach methodology for BTRNDP is classified by 8 categories: manual & guideline, market analysis, system analytic model. heuristic model. hybrid model. experienced-based model. simulation-based model. mathematical optimization model. In most previous BTRNDP, objective function is to minimize user and operator costs, and constraints on the total operator cost, fleet size and service frequency are common to several previous approach. Transit trip assignment mostly use multi-path trip assignment. Since the search for optimal solution from a large search space of BTRNDP made up by all possible solutions, the mixed combinatorial problem are usually NP-hard. Therefore, previous researches for the BTRNDP use a sequential design process, which is composed of several design steps as follows: the generation of a candidate route set, the route analysis and evaluation process, the selection process of a optimal route set Future study will focus on a development of detailed OD trip table based on bus stop, systematic transit route network evaluation model. updated transit trip assignment technique and advanced solution search algorithm for BTRNDP.

• Journal of Korean Society of Transportation
• /
• v.30 no.3
• /
• pp.71-82
• /
• 2012

This study analyzed factors affecting daily travel times at each stage of commuters' life cycle. In this study, travel times were dealt with in the context of trip chain. That is, the travel time was defined as the total amount of time commuters had spent to move for daily activities from leaving to coming back home. A commuter's life cycle was divided into 6 stages on a basis of both householder's age and family type: i.e., the unmarried youth period, the family forming period, the children education period, the children youth period, the children independence period, and the aged period. Variables such as commuting times, home-based trip cycle recurrences, and the number of stops differed for each stage of life cycle, the latter of which represents how many places a commuter dropped by during a trip cycle. Several factors were found to affect commuting times at each stage of life cycle as a result of applying a Cox proportional hazard model. The empirical study was conducted using 2010' household travel survey data collected from Gyeonggi-do.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.10a
• /
• pp.227-230
• /
• 2009

In order to predict failure behavior of advanced high-strength steel sheets (AHSS) in hole expansion tests, damage model was developed considering surface condition sensitivity (with specimens prepared by milling and punching: 340R, TRIP590, TWIP940). To account for the micro-damage initiation and evolution as well as macro-crack formation, the stress triaxiality dependent fracture criterion and rate-dependent hardening and ultimate softening behavior were characterized by performing numerical simulations and experiments for the simple tension and V-notch tests. The developed damage model and the characterized mechanical property were incorporated into the FE program ABAQUS/Explicit to perform hole expansion simulations, which showed good agreement with experiments.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.5
• /
• pp.688-699
• /
• 2017

Model-based test, a well-known method of the black box tests, is consisted of the following four steps : model construction using requirement, test case generation from the model, execution of a SUT (software under test) and detection failures. Among models constructed in the first step, state-based models such as UML standard State Machine are commonly used to design event-based embedded systems (e.g., weapon control systems). To generate test cases from state-based models in the next step, coverage-based techniques such as state coverage and transition coverage are used. Round-trip path coverage technique using W-Method, one of coverage-based techniques, is known as more effective method than others. However it has a limitation of low failure observability because the W-Method technique terminates a testing process when arrivals meet states already visited and it is hard to decide the current state is completely same or not with the previous in the case like the GUI environment. In other words, there can exist unrevealed faults. Therefore, this study suggests a Extended W-Method. The Extended W-Method extends the round-trip path to a final state to improve failure observability. In this paper, we compare effectiveness and efficiency with requirement-item-based technique, W-Method and our Extended W-Method. The result shows that our technique can detect five and two more faults respectively and has the performance of 28 % and 42 % higher failure detection probability than the requirement-item-based and W-Method techniques, respectively.

• International Journal of Highway Engineering
• /
• v.17 no.6
• /
• pp.75-83
• /
• 2015

PURPOSES : This study deals with the traffic accidents classified by the traffic analysis zone. The purpose is to develop the accident density models by using zonal traffic and socioeconomic data. METHODS : The traffic accident density models are developed through multiple linear regression analysis. In this study, three multiple linear models were developed. The dependent variable was traffic accident density, which is a measure of the relative distribution of traffic accidents. The independent variables were various traffic and socioeconomic variables. CONCLUSIONS : Three traffic accident density models were developed, and all models were statistically significant. Road length, trip production volume, intersections, van ratio, and number of vehicles per person in the transportation-based model were analyzed to be positive to the accident. Residential and commercial area ratio and transportation vulnerability ratio obtained using the socioeconomic-based model were found to affect the accident. The major arterial road ratio, trip production volume, intersection, van ratio, commercial ratio, and number of companies in the integrated model were also found to be related to the accident.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.5
• /
• pp.180-183
• /
• 2008

This research addresses the problem of estimating Origin-Destination (O-D) trip matrices from link volume counts, a set of unobserved link volumes and information of user equilibrium flows in transportation networks. A heuristic algorithm for estimating unobserved link flows is derived, which provides volume estimates that are approximately consistent with both observed flows and an assumption of user equilibrium conditions. These estimated link volumes improve the constraints associated with the synthetic OD estimation model, providing improved solution search procedure. Model performance is tracked in terms of the root mean square errors (RMSE) in predicted travel demands, and where appropriate, predicted linked volumes. These results indicate that the new model substantially outperforms existing approaches to estimating user-equilibrium based synthetic O-D matrices.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.7-18
• /
• 1999

This Paper focuses on analyzing the influences of Teleservice on travel behavior and trip demand based on the individual behavior model. The first step is to classify individuals into different Person groups who will follow similar behavior Patterns in terms of travel and communication. And then, the effect of Teleservice on trip demand is estimated using hypothetical scenario. The results on the ability of each person group to adapt themselves to Teleservice show that full-time housekeepers and senior citizens are more likely to be alienated. It is also found that transition probability to Teleservice is high for activities in bank or public office where simple forms of information such as data or text are exchanged. On that basis, it is estimated that in Seoul the savings on trip demand by Teleservice will be 7.6% of total daily trip generations.