• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.371-372
• /
• 2007

The major causes of electrical fire are classified to short circuit fault, overload fault, electric leakage and electric contact failure. The occurrence factor of the fire is electric arc or spark accompanied with electrical faults. Residual Current Protective Device (RCD), that is Earth Leakage Circuit Breaker(ELB) and Molded_case Circuit Breaker (MCB), of high sensitivity type used at low voltage wiring cuts off earth leakage and overload, but the RCD can't cut off electric arc or spark to be a major factor of electrical fire. As the RCDs which are applied low voltage distribution panel are prescribed to rated breaking time about 30[ms] (KS C 4613), the RCDs can't perceive to the periodic electric arc or spark of more short wavelength level. To be improved on such problem, this research development is proposed to a auxiliary control apparatus for RCD trip on electric arc or spark due to electrical fire. Some experimental results of the proposed apparatus is confirmed to the validity of the analytical results.

• 조명전기설비학회논문지
• /
• 제22권9호
• /
• pp.111-119
• /
• 2008

본 논문에서는 최근 분산전원 확대보급에 따라 계량오차 발생, 변전소 CB 또는 Recloser, 수전설비 VCB의 OCGR 오동작, 배전자동화 시스템 거짓FI 정보발생 등 한전 배전계통에서 발생되는 오동작 현상에 대해서 원인분석을 수행하였고 그 원인은 변압기 결선에 의한 역 조류현상임을 규명하였다. 이러한 역 조류현상의 영향으로 배전계통의 3상 기본파 전류가 N상에서 동상이 되어 3배의 전류로 합산되었으며, 이 현상을 근거로 새로운 계통해석 방법을 제시하였다. 새로운 계통해석 방법을 적용하여 구간별 고장전류를 해석하였고, 역 조류현상 규명을 위해 변압기 결선형태 별로 역 조류 발생여부를 실험하였다. 또한 PSCAD/EMTDC로 실제 계통을 모의함으로써 역 조류에 의한 오동작 현상을 줄이기 위한 방법으로 중성선의 영상임피던스를 조절하는 방법을 제시하였다.

• 영어영문학
• /
• 제57권1호
• /
• pp.73-105
• /
• 2011

The purpose of this paper is to contend the importance of resurrection of fluid identity and ecological imagination for making the habitable biosphere in Marilynne Robinson's Housekeeping. Ruth as a narrator suggests the future-oriented vision that the environment and nature(mother) can be resurrected, crossing Fingerbone bridge of the boundary line of society/nature as a faithful follower of her aunt Sylvie and becoming the existence with a transparent voice despite of her absence. This novel is to rewrite the American pastoral. Based on the patriarchical way despite of the absence of Edmund Foster, Sylvia's conventional housekeeping is to divide between inside and outside of the house. Nevertheless, Sylvia's relentless efforts to keep her house intact turns out to be fragile. Contrasting with Sylvia, Sylvie's housekeeping is to recognize the continuity of inside and outside. She willingly accepts the reconciliation of the self, the nature and the society. After Ruth and Lucille's staying at night in the lake, they are diverged into going their own way. Ruth accepts Sylvie as a substitute mother. Lucille leaves the house voluntarily and go to her Home Economics teacher, Miss Royce, pursuing the ideal mother of symbolic society. Sylvie and Ruth has the more intimate bond, with their trip to the deserted house in the valley. Ruth meditates on the non-solidity of house and the resurrection of her family. Leaving their house to escape from the town people's legal enforcement, Sylvie and Ruth become transients. Although their history is completed by the drown-death publicly, they always want to visit Lucille's well kept house in Fingerbone. Therefore the method for making Ruth and Sylvie as the existences of ecological imagination return to the real world is to accept the reconciliation of nature and society. This novel is not limited as the binary opposition of vagrance/stability and transience/durability. The significant element of fluid identity can be composed of the interactions with transience and stability.

• 한국압력기기공학회 논문집
• /
• 제17권1호
• /
• pp.18-27
• /
• 2021

This study aims to develop an improved evaluation technology for assessing CANDU-6 safety. For this purpose, the multiple steam generator tube rupture (mSGTR) followed by an unmitigated station blackout (SBO) in a CANDU-6 plant was selected as a hypothetical event scenario and the analysis model to evaluate the plant responses was envisioned into the MARS-KS input model. The model includes logic models for controlling the pressure and inventory of the primary heat transport system (PHTS) decreasing due to the u-tubes' rupture, as well as the main features of PHTS with a simplified model for the horizontal fuel channels, the secondary heat transport system including the shell side of steam generators, feedwater and main steam line, and moderator system. A steady state condition was successfully achieved to confirm the stable convergence of the key parameters. Until the turbine trip, the fuel channels were adequately cooled by forced circulation of coolant and supply of main feedwater. However, due to the continuous reduction of PHTS pressure and inventory, the reactor and turbine were shut down and the thermal-hydraulic behaviors between intact and broken loops got asymmetric. Furthermore, as the conditions of low-flow coolant and high void fraction in the broken loop persisted, leading to degradation of decay heat removal, it was evaluated that the peak cladding temperature (PCT) exceeded the limit criteria for ensuring nuclear fuel integrity. This study is expected to provide the technical bases to the accident management strategy for transient conditions with multiple events.

• Applied Microscopy
• /
• 제52권
• /
• pp.5.1-5.10
• /
• 2022

The use of Pipelines for long-distance transportation of crude oil, natural gas and similar applications is increasing and has pivotal importance in recent times. High specific strength plays a crucial role in improving transport efficiency through increased pressure and improved laying efficiency through reduced diameter and weight of line pipes. TRIP-based high-strength and high-ductility alloys comprise a mixture of ferrite, bainite, and retained austenite that provide excellent mechanical properties such as dimensional stability, fatigue strength, and impact toughness. This study performs microstructure analysis using both Nital etching and LePera etching methods. At the time of Nital etching, it is difficult to distinctly observe second phase. However, using LePera etching conditions it is possible to distinctly measure the M/A phase and ferrite matrix. The fraction measurement was done using OM and SEM images which give similar results for the average volume fraction of the phases. Although it is possible to distinguish the M/A phase from the SEM image of the sample subjected to LePera etching. However, using Nital etching is nearly impossible. Nital etching is good at specific phase analysis than LePera etching when using SEM images.

• 한국통신학회논문지
• /
• 제27권2C호
• /
• pp.160-169
• /
• 2002

ATM PON (Passive Optical Network) 시스템은 OLT (Optical Line Termination)와 다수의 ONU (Optical Network Unit), 그리고 스플리터와 함께 PON을 구성하는 광케이블로 구성된다. 상향 전송에서 셀 충돌을 피하기 위하여, 새로운 ONU가 설치될 때 ranging이라는 정교한 절차를 필요로 한다. 이 절차가 종료된 후에 ONU는 OLT가 제공하는 승인에 따라 상향 셀을 전송할 수 있다. 여러 가지 요인의 변화에 의해 발생할 수 있는 셀 충돌을 예방하기 위하여, OLT는 지속적으로 셀 위상 감시를 수행해야 한다. 이는 OLT가 모든 상향 셀에 대하여 기대되는 도착 시점을 예측하고, 실제 도착하는 시점을 감시하여, 두 시점 간의 오차를 계산하는 것을 의미한다. 따라서, OLT의 TC (Transmission Convergence) 칩에는 현재 제공하는 승인에 대한 셀의 도착할 시점을 계산할 수 있는 예측기가 필요하다. 본 논문에서는 이러한 예측기를 등화왕복지연에 해당하는 길이를 갖는 이동 레지스터를 이용하여 구현한다. 하나의 레지스터는 8 비트로 구성되어, OLT는 어떤 ONU가 어떤 종류의 셀을 보내는지 확인할 수 있다. 또한 TC 칩은 예측기의 기능을 이용하여 ONU의 유효 대역폭을 계산할 수 있다. 타임 시뮬레이션과 구현된 광 보드를 측정하여, 예측기의 동작을 확인한다.

• 대한지리학회지
• /
• 제30권4호
• /
• pp.352-363
• /
• 1995

본 연구는 서울시를 연구대상지역으로 하여 지하철 이용에 따른 이용자간 비용의 차이에 의 하여 발생할 수 있는 이용자간 형평성의 문제를 승객거리당 비용을 비교 지표로 사용하여 지하철의 노선과 구간 및 지역에 따라 분석하였다. 분석결과 연구지역 지하철 이용에 따른 비용은 노선과 구간에 따라 상당한 정도의 차이를 나타내고 있는 것으로 나타났다. 즉 노선 에 따른 승객거리당 비용을 비교한 결과 1호선과 4호선의 경우 전체 평균치를 훨씬 상회하 는 반면 2호선과 3호선의 경우 전체 평균치에 미치지 못함으로서 노선에 따라 이용자간의 보조가 발생 할 수 있음을 시사한다. 또한 이용자들의 이용지역에 따른 비교에 의하면 전반 적으로 도시 중심지에 위치한 구간의 승객거리당 비용이 도시 외곽에 위치한 구간의 승객거 리당 비용에 비하여 훨씬 낮은 것으로 나타나 이용자들의 이용지역에 따라 이용자간 보조가 발생할 수 있음을 알 수 있다. 이러한 이용자간의 불합리한 보조에 따른 이용자간의 형평성 문제를 완화하기 위하여는 지하철의 요금체계에 이용자들의 이용에 따른 비용이 적절히 반 영되어야 한다. 따라서 현재 통행거리에 따라 2원화되어 있는데 불과한 단순운임체계를 개 선하여 이용자들의 이용에 따른 한계비용이 보다 적절히 반영될 수 있는 합리적인 운임체계 가 요구된다고 할 수 있다.

• 수산해양기술연구
• /
• 제53권2호
• /
• pp.126-131
• /
• 2017

To improve the efficiency of hairtail trolling, it is important to gain an accurate understanding of the distribution of fish based on their diurnal vertical migration patterns. This study evaluated the vertical distribution of hairtails through catch efficiency tests using vertical longlines. Five replicate tests of the efficiency were carried out on the eastern coast of Jeju Island from August to September 2016, from 11:00 AM to 03:00 PM in the daytime and 11:00 PM to 03:00 AM in the nighttime. The fishing gear was composed of 20 hooks per line set, numbered in order from the first hook near the surface to the last hook on the seabed. The depth of the first hook was 18 m, and that of the last hook was 86 m. Pacific saury was used as the baits. In total, 10 sets of fishing gear were used per trip. After fishing, we counted the hairtails at each numbered hook, which were summed up both by number and in aggregate. A total of 232 hairtails were caught using 2,000 hooks: 193 individuals at daytime and 39 at nighttime. The hook rate was 11.5% : 9.6% at daytime; 2.0% at nighttime. For both daytime and nighttime catches, there were variations in the hook rates at each numbered hook. In the daytime, a maximum of 28.5% catches occurred at hook number 18, followed by 21.4% at number 20, and 10.7% at number 17, accounting for 60.6% of the daytime hook rates. In the nighttime, a maximum of 23.0% catches occurred at hook number 1, followed by 15.3% at hook number 4 and 9, accounting for 53.6% of the nighttime hook rate. Based on the above results, hairtails are usually distributed in deeper region in daytime, whereas they occur near the surface in nighttime. Therefore, it is necessary to position trolling lines according to diurnal vertical distribution layers of hairtails for fishing efficiency.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제20권12호
• /
• pp.652-657
• /
• 2014

출발지와 도착지, 사용자가 방문해야 하는 POI(Point of Interest)유형들, 이 유형들 중 전체 혹은 부분에 대한 방문순서들이 주어질 때, 출발지에서 여러 방문순서를 만족시키는 순서대로 각 POI 유형별로 적어도 하나의 POI를 방문한 후 목적지에 도착하는 경로를 순차적 경로라 한다. 본 논문에선 이 경로 중 근사 최단 경로(Approximate Shortest Path)를 찾는다. 기존의 두 가지 기법은 방문한 POI(또는 출발지)와 방문해야 할 유형의 POI들과의 근접성 만을 보거나 후보군 선정 시 방문순서 및 네트워크를 고려하지 않고 출발지와 목적지를 이은 직선과 가까운 POI들로 경로를 찾는 문제를 갖고 있었다. 본 논문에서는 네트워크 탐색을 이용하여 출발지와 목적지 간 네트워크 경로에 근접한 POI를 후보군으로 선정하여 경로를 탐색하고, 이 경로 중 방문한 POI유형이 많은 경로에 적응적 우선순위를 주어 향상된 근사 최단 경로를 구하는 기법을 제안한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.145-145
• /
• 2008

High-k materials have been paid much more attention for their characteristics with high permittivity to reduce the leakage current through the scaled gate oxide. Among the high-k materials, $ZrO_2$ is one of the most attractive ones combing such favorable properties as a high dielectric constant (k= 20 ~ 25), wide band gap (5 ~ 7 eV) as well as a close thermal expansion coefficient with Si that results in good thermal stability of the $ZrO_2$/Si structure. During the etching process, plasma etching has been widely used to define fine-line patterns, selectively remove materials over topography, planarize surfaces, and trip photoresist. About the high-k materials etching, the relation between the etch characteristics of high-k dielectric materials and plasma properties is required to be studied more to match standard processing procedure with low damaged removal process. Among several etching techniques, we chose the inductively coupled plasma (ICP) for high-density plasma, easy control of ion energy and flux, low ownership and simple structure. And the $BCl_3$ was included in the gas due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. During the etching process, the wafer surface temperature is an important parameter, until now, there is less study on temperature parameter. In this study, the etch mechanism of $ZrO_2$ thin film was investigated in function of $Cl_2$ addition to $BCl_3$/Ar gas mixture ratio, RF power and DC-bias power based on substrate temperature increased from $10^{\circ}C$ to $80^{\circ}C$. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by scanning emission spectroscope (SEM). The chemical state of film was investigated using energy dispersive X-ray (EDX).