• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.45 no.3
• /
• pp.15-21
• /
• 2008

This paper presents a new association mining algorithm that uses two phase sampling for shortening the execution time at the cost of precision of the mining result. Previous FAST(Finding Association by Sampling Technique) algorithm has the weakness in that it only considered the frequent 1-itemsets in trimming/growing, thus, it did not have ways of considering mulit-itemsets including 2-itemsets. The new algorithm reflects the multi-itemsets in sampling transactions. It improves the mining results by adjusting the counts of both missing itemsets and false itemsets. Experimentally, on a representative synthetic database, the algorithm produces a sampled subset of results with an increased accuracy in terms of the 2-itemsets while it maintains the same 1uality of the data set.

• Korean Journal of Computational Design and Engineering
• /
• v.15 no.2
• /
• pp.115-123
• /
• 2010

We present an efficient algorithm for computing the Hausdorff distance between two planar curves. The algorithm is based on an efficient trimming technique that eliminates the curve domains that make no contribution to the final Hausdorff distance. The input curves are first approximated with biarcs within a given error bound in a pre-processing step. Using the biarc approximation, the distance map of an input curve is then approximated and stored into the graphics hardware depth-buffer by rendering the distance maps (represented as circular cones) of the biarcs. We repeat the same procedure for the other input curve. By sampling points on each input curve and reading the distance from the other curve (stored in the hardware depth-buffer), we can easily estimate a lower bound of the Hausdorff distance. Based on the lower bound, the algorithm eliminates redundant curve segments where the exact Hausdorff distance can never be obtained. Finally, we employ a multivariate equation solver to compute the Hausdorff distance efficiently using the remaining curve segments only.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.8
• /
• pp.635-640
• /
• 2016

The shell body is the main exterior part of a compressor, and production of shell bodies has increased along with a growing demand for air conditioners, refrigerators, air compressors, and so on. Cracks frequently occur in the process of welding a shell body. In this study, a deep drawing process for creating a shell body from a blank is developed. The technique consists of a four-step deep drawing and a two-step trimming process. Analysis is performed by DEFORM software to examine the safety of the deep drawing and trimming processes. The deep drawing process for the shell body developed in this study would have wide application in many industrial fields.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.1
• /
• pp.27-33
• /
• 2011

Carbon board, an electromagnetic shielding new material, is expected to be applied to the art wall by combining draft designs. When environment-friendly architecture materials are used as an interior wall, they are suitable as finishing materials. According to the increasing tendency of the application of carbon board, various styles could be made by decorating the whole or a part of a wall with tiles with module structure or by patterning the wall with panel-type woodcut or pictures or sculpture. And more graphic design based on diverse variation, and reconstruction and combination between other motif is being on the rise as a new expression. In this paper, make it possible to applying in MDF board and carbon board pattern design using the woodcut technique. The structural and physical properties were compared by usability of abrasion, toughness, stability. Samples are analyzed dependent on the hardness and relative density, change of detail pattern design and trimming technique. These results have shown that the possibility of applying of carbon board can be a high rank interior materials, capable of creating value of the living system, connects with MDF board, also can express humanism in a beautiful manner.

• Archives of Plastic Surgery
• /
• v.32 no.6
• /
• pp.710-716
• /
• 2005

A total of 21 patients were operated. Via a columellar labial incision, the upper lateral cartilages were separated from the septum. A submucous resection of the septal cartilage was carried out. After rasping the convex lateral nasal wall of the unaffected side, a low-to-low lateral nasal osteotomy was conducted. Along the deviated dorsal line at the bony vault passing the submucous tunnel, a paramedian nasal osteotomy was performed. The convex side of the nasal bone flap was contoured by rasping. The convex side of the "T"-shaped dorsal septum was trimmed. A total direct septal extension graft of the septal cartilage was done and the alar cartilages were suspended to it. The postoperative results were evaluated by photogrammetric analysis processed by a "neon glow" filter in Adobe Photoshop. The distance from the nasal midline to the most deflective point at 5 levels was measured, and the proportion indices were obtained in regard to intercanthal distance. The results revealed improvement in all levels (p < 0.05), although not perfect. In summary, this technique can result in a clinically good-looking in spite of a slight deflection that still exists

• Proceedings of the Korean Magnestics Society Conference
• /
• 2011.12a
• /
• pp.59-61
• /
• 2011

• Transactions of Materials Processing
• /
• v.20 no.4
• /
• pp.273-278
• /
• 2011

Employing the TRIZ problem solving technique, a hybrid-type center plate for the molten carbonate fuel cell(MCFC) was developed for the purpose of improving gas sealing and maintenance. The manufacturing method of the hybrid-type center plate was divided into a trimming operation and a two-step bending process. In the latter, a modified punch shape was used to reduce springback. Using finite element(FE) simulations, bending stresses in the thickness and the in-plane directions were computed and the bending conditions were optimized. The optimized results of the two-step bending process were used as a basis for the design of the trimming process of the hybrid-type center plate. Finally, the external manifold-type center plate and the hybrid-type center plate were fabricated using a die set that accounts for the optimized conditions. It was found that the numerical simulation results were in good agreement with the experiments.

• Archives of Plastic Surgery
• /
• v.48 no.2
• /
• pp.158-164
• /
• 2021

Background In lower lateral cartilage (LLC) surgery, cephalic trimming poses risks for the collapse of the internal and external nasal valves, pinched nose, and drooping deformity. The cephalic lateral crural advancement (CLCA) technique presented herein was aimed at using a flap to increase nasal tip rotation and support the lateral crus, in addition to the internal and external nasal valves, by avoiding grafts without performing excision. Methods This study included 32 patients (18 female and 14 male) and the follow-up period for patients having undergone primer open rhinoplasty was 12 months. The LLC was elevated from the vestibular skin using the CLCA flap. A cephalic incision was performed without cephalic trimming. Two independent flaps were formed while preserving the scroll ligament complex. The CLCA flap was advanced onto the lower lateral crus while leaving the scroll area intact. The obtained data were analyzed retrospectively. Results The mean age of the patients was 31.6 years (range, 20-51 years). The Rhinoplasty Outcome Examination scores after 12 months varied from 90 to100 points, and 93% of patients reported perfect satisfaction. At a 1-year follow-up, the patients' nasal patency (visual analogue scale) rose from 4.56±1.53 (out of 10) to 9.0±0.65 (P<0.001). Conclusions The CLCA flap led to better nasal tip definition by protecting the scroll area, increasing tip rotation, and supporting the internal and external nasal valves without cephalic excision.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.3
• /
• pp.149-157
• /
• 2000

Tool wear in the shearing process such as blanking, piercing and trimming is very important, because it has great effects on the dimensional accuracy, working efficiency and economy. Most of tools in the shearing process have the coated layer at surface fur good wear and corrosion resistance. When the surface of tool is teated, the wear Phenomena of coated surface layer and inner layer may be different. This paper describes a computer modelling technique by the finite element method in order to investigate the wear mechanism and to predict the wear profile of Ti-N coated tool in piercing process according to the volume of Production. Wear coefficients of the coated layer and inner layer are obtained through Pin-on-Disk wear test, respectively. To verify the effectiveness of the suggested technique, the technique is applied to wear analysis in piercing recess of piston pin and simulation results are compared with experimental ones.

• Archives of Plastic Surgery
• /
• v.44 no.2
• /
• pp.170-172
• /
• 2017

There exist some restrictions and difficulties in performing follicular unit extraction (FUE) in white-haired patients, for several reasons. In this paper, we introduce a novel technique for visualizing white hair during the punching procedure and graft preparation in FUE for white-haired patients. In white-haired older male patients, we dyed the surrounding scalp skin purple with a gentian violet solution-stained toothpick. Our method has several advantages: surgeons can easily focus on the center of the follicular unit and rapidly perform punching, they can recognize the condition of the harvested follicular units during FUE, and the hair transplant team can secure a clear view for trimming and loading into the implanter. We suggest that scalp dyeing in difficult FUE procedures, especially in patients with white hair, may be a simple method that provides a good visualization for donor site harvesting and for microdissection.