PURPOSE. This study investigated the influence of bone quality and surgical technique on the implant stability quotient (ISQ) value. In addition, the influence of interfacial bone quality, directly surrounding the implant fixture, on the resonance frequency of the structure was also evaluated by the finite element analysis. MATERIALS AND METHODS. Two different types of bone (type 1 and type 2) were extracted and trimmed from pig rib bone. In each type of bone, the same implants were installed in three different ways: (1) Compaction, (2) Self-tapping, and (3) Tapping. The ISQ value was measured and analyzed to evaluate the influence of bone quality and surgical technique on the implant primary stability. For finite element analysis, a three dimensional implant fixture-bone structure was designed and the fundamental resonance frequency of the structure was measured with three different density of interfacial bone surrounding the implant fixture. RESULTS. In each group, the ISQ values were higher in type 1 bone than those in type 2 bone. Among three different insertion methods, the Tapping group showed the lowest ISQ value in both type 1 and type 2 bones. In both bone types, the Compaction groups showed slightly higher mean ISQ values than the Self-tapping groups, but the differences were not statistically significant. Increased interfacial bone density raised the resonance frequency value in the finite element analysis. CONCLUSION. Both bone quality and surgical technique have influence on the implant primary stability, and resonance frequency has a positive relation with the density of implant fixture-surrounding bone.
Journal of the Korean Association of Oral and Maxillofacial Surgeons
/
제41권3호
/
pp.119-123
/
2015
Objectives: Dentin is composed of many minerals and growth factors. Based on this composition, we studied its effect as a possible regenerative material for alveolar healing. Materials and Methods: This study was conducted using four 2.5-year-old mongrel dogs (male; weight, 25 to 30 kg). The third mandibular premolars were carefully mobilized with a dental elevator and then removed using forceps. The crown portions of the extracted teeth were removed with cutters, and the root portions of the remaining teeth were collectively trimmed as closely as possible to 350 to $500{\mu}m$. Dentin and cementum (DC) chips harvested from the extracted teeth were soaked in blood and packed into the fresh sockets (autograft). Biopsies were performed at the ends of day 14 and day 56 following implantation. Data were expressed as $mean{\pm}standard$ deviation and compared with t-test results. Results: The ratio of $S_A$(bone) to total area of each probe was determined and was $170{\pm}16{\mu}m^2$ for the control group and $71{\pm}14{\mu}m^2$ for the DC group, a significant difference (P <0.05). Conclusion: DC particulate grafts offered no improvement in bone regeneration in alveolar extraction sockets.
포화점토가 보오링공에서 불교란시료로써 채취되면, 부의 간극수압이 체적팽창을 억제한다. 이 점토시료에는 지반중에서 작용한 평균주응력이 등방적으로 작용하며, 이 평균주응력은 수직응력보다 작고, 수평응력보다 크다. 그러므로 시료는 비배수조건하에서 수직으로 늘어나고, 수평으로 수축하게 된다. 통상적인 압밀시험은 이와 같이 변형된 시료를 그대로 사용하여 압밀링 크기와 똑같이 성형한 후 수행한다. 따라서 지반중의 유효상재압이 재하되면, 이 압력이 수평응력보다 크기 때문에 압밀량이 늘어나게 된다. 즉 압밀시험공시체는 현장의 압밀거동을 정확하게 나타내지 못하고 항상 아래에 위치하게 된다. 이 논문에서는 상기와 같은 시료변형의 영향을 고려하여, 압밀시험 공시체에 유효상재압이 재하되었을때 수평방향으로 비배수 변형하여 압밀링 내경에 밀착해도록 하였다. 그리고 제안하는 시험법의 적용성과 결과를 통상적인 압밀시험결과와 검토하였다.
Teng Ma;Tiwu Peng;Yang Lin;Mindi Zhang;Guanghui Ren
The Journal of Advanced Prosthodontics
/
제15권3호
/
pp.145-154
/
2023
PURPOSE. The objective of this study was to investigate how internal structures influence the overall and marginal accuracy of full arch preparations fabricated through additive manufacturing in different printing systems. MATERIALS AND METHODS. A full-arch preparation digital model was set up with three internal designs, including solid, hollow, and grid. These were printed using three different resin printers with nine models in each group. After scanning, each data was imported into the 3D data processing software together with the master cast, aligned and trimmed, and then put into the 3D data analysis software again to compare the overall and marginal deviation whose results are expressed using root mean square values and color maps. To evaluate the trueness of the resin model, the test data and reference data were compared, and the precision was evaluated by comparing the test data sets. Color maps were observed for qualitative analysis. Data were statistically analyzed by one-way analysis of variance and Bonferroni method was used for post hoc comparison (α = .05). RESULTS. The influence of different internal structures on the accuracy of 3D printed resin models varied significantly (P < .05). Solid and grid models showed better accuracy, while the hollow model exhibited poor accuracy. The color maps show that the resin models have a tendency to shrink inwards. CONCLUSION. The internal structure design influences the accuracy of the 3D printing model, and the effect varies in different printing systems. Irrespective of the kind of printing system, the printing accuracy of hollow model was observed to be worse than those of solid and grid models.
산림박물관은 산림 및 산림과 밀접한 환경에 관련한 특화된 유물과 자료를 수집 전시 및 교육을 위한 시설이라고 정의 할 수 있다. 본 연구는 경상남도산림박물관을 대상으로 산림과 환경에 대한 교육적 가치를 추정하기 위해 수행되었으며 그 도구는 환경재의 가치추정방법으로 널리 알려진 가상가치평가법(Contingent Valuation Methods: CVM)을 이용하였다. 가치추정을 위한 연구는 대상지의 선정, 제시금액의 결정, 설문종사자들에 대한 사전교육 등을 거쳐 2014년 4월에서 10월에 걸쳐서 실시되었으며 386부를 분석에 이용하였다. 가치추정방식은 DBDC방식의 로짓모형을 이용하였으며 투입된 모수는 방문횟수(time), 환경교육의 정도(contri), 응답자의 환경보존노력(execu), 응답자의 학력(edu), 응답자의 소득(inc) 등을 투입하여 절단된 평균값(WTPtruncated)을 이용하였다. 연구의 결과 일인당 1회 방문시 얻을 수 있는 식물과 환경교육에 대한 가치는 23,338원이었다. 이를 2010년에서 2014년 까지 연간 평균이용객 약 430,000명을 적용하면 경상남도산림박물관이 매년 이용객에게 제공하는 환경의 가치는 약 100억원 이상으로 추정 할 수 있었다. 본 연구의 결과는 산림박물관이 관람객에게 제공하는 산림교육 및 환경의 가치를 현재의 통용되는 화폐액으로 제시 한데 그 의의가 있으며 산림박물관의 가치를 더욱 직접적으로 판단 할 수 있는 근거를 제시하여 산림박물관에 대한 직접적인 가치를 판단하게 하여 산림 및 환경교육에 대한 인식을 전환하는 기회가 될 수 있을 것이다.
Purpose: Negative pressure therapy has been used in various conditions to promote wound healing. It has also been used to secure a skin graft by improving microcirculation and improving tight adhesion between the graft and the recipient bed. To reduce post burn scar contracture and improve aesthetical result, many types of dermal substitutes have been invented and used widely. The goal of this study was evaluate usefulness of the VAC (Kinetic concepts Inc., San Antonio, TX) in improving the take rate and time to incorporation of Integra$^{(R)}$ in reconstruction of burn scar contracture. Methods: A retrospective study was performed from October, 2006 to December, 2008. The VAC was utilized for 11 patients. The average patient's age was 19.7 years (range 5 - 27) and average surface area was $785cm^2$ (range 24 - 1600). The burn scars were excised deep into normal subcutaneous tissue to achieve complete release of the scar, Integra$^{(R)}$ was sutured in place with skin staple와 Steri - strip$^{(R)}$. Then slit incisions were made on silicone sheet only with No.11 blade for effective drainage. The VAC was used as a bolster dressing over Integra$^{(R)}$. Negative - Pressure ranging from 100 to 125 mm Hg was applied to black polyurethane foam sponge trimmed to the appropriate wound size. An occlusive seal over the black polyurethane foam sponge was maintained by a combination of the occlusive dressing, OP - site$^{(R)}$. The VAC dressing changes were performed every 3 or 4 days until adequate incorporation was obtained. The neodermis appeared slightly yellow to orange color. When the Integra$^{(R)}$ deemed clinically incorporated, The VAC was removed and take was estimated with visual inspection. Very thin STSG(0.006 ~ 0.008 inches) was performed after silicone sheet removal. Result: The mean time for clinically assessed incorporation of Integra$^{(R)}$ was 10.00 days (range 9 - 12). The mean dressing change was 3.5 times until take was obtained. In All patients, Integra$^{(R)}$ had successful incorporation in tissue without serious complications. Conclusion: Integra$^{(R)}$ in combination with Vacuum - Assisted Closure(VAC) may be incorporated earlier than conventional dressing method.
Purpose: Even in a small levator resection for blepharoptosis, 10 ~ 13 mm of $M{\ddot{u}}ller^{\prime}s$ muscle and levator aponeurosis is resected. To solve the problem, $M{\ddot{u}}ller^{\prime}s$ muscle was detached from the superior tarsal border and conjunctiva, and the muscle with overlying levator aponeurosis was advanced on the upper tarsus as a composite flap. The purpose of this study was to evaluate the effectiveness of the $M{\ddot{u}}ller^{\prime}s$ muscle - levator aponeurosis complex advancement technique for the correction of blepharoptosis. Methods: Between 2003 and 2008, 107 patients(183 eyes) underwent the advancement procedure of the $M{\ddot{u}}ller^{\prime}s$ muscle - levator aponeurosis composite flap for blepharoptosis. The advanced composite flap was fixed 3 mm below the superior tarsal border and 2 ~ 3 mm of distal flap stump was left after trimming up to 5 mm. The results of the operations were evaluated. Results: The mean age of the patients was 35.2 years and 83 patients(145 eyes) were followed up for a mean of 16.7 months. 128 eyes (88.3%) showed a normal level of upper eyelid margin (MRD1 4.1 ~ 5.0 mm) or less than 1 mm ptosis (MRD1 3.1 ~ 4.0 mm). 10 eyes(6.9%) showed 1 ~ 2 mm ptosis (MRD1 2.1 ~ 3.0 mm). 7 eyes(4.8%) showed more than 2 mm ptosis which required secondary correction. About 80% of the 183 eyes needed no trimming of the flap stump with 5 ~ 6 mm of composite flap advancement and 20% had about 3 mm of the flap stump trimmed with 8 ~ 9 mm of composite flap advancement(shortening of the levator complex). Conclusion: $M{\ddot{u}}ller^{\prime}s$ muscle - levator aponeurosis complex advancement technique offers several advantages: There is no, or minimal, sacrifice of the normally functioning $M{\ddot{u}}ller^{\prime}s$ muscle; it is more physiological; it is reproducible and it is predictable - with gratifying results for blepharoptosis.
The growth and biomass of reeds(Phragmites australis) growing in a subsurface treatment wetland system were investigated from April 2003 to October 2003. Nitrogen(N) and phosphorous(P) concentrations in above-ground(AG) and below-ground(BG) tissues of reeds were examined and the removal rate of N and P by reeds were analyzed. The system, 29 m in length, 9 m in width and 0.65 m in depth, was constructed in June 2001 on a floodplain in the down reach of the Kwangju Stream in Korea in order to purify polluted water of the stream. A bottom layer of 45 cm in depth was filled with crushed granites(15~30 mm in diameter) and a middle layer of 10 cm in depth was filled with pea pebbles(10 mm in diameter). An upper layer of 5 cm contained course sand. Reeds were transplanted on the surface of the system, which were dug out of natural wetlands, and their shoots were trimmed 40 cm in height. The height and density of the shoots averaged 237.7 cm and 244.0 shoot/$m^2$, respectively, when the reeds grew fully. The maximum biomass of AG and BG tissues were 1,964 and 1,577 g/$m^2$, respectively, and the AG : BG ratio of biomass was 1.26. Mean AG and BG dry weights were recorded as 1,355 and 748 g/$m^2$, respectively. The AG and BG tissue concentrations of N averaged 12.37 and 10.01 mg/g, respectively, and those of P 2.37 and 2.03 mg/g, respectively. Inflow to the system averaged 40 $m^3$/day. The concentrations of total nitrogen(T-N) in influent and effluent were 8.4 mg/L and 3.2 mg/L, respectively, and those of total phosphorous(T-P) were 0.73 and 0.38 mg/L, respectively. The total removal of T-N and T-P by the system during the investigation period averaged 140.2 and 9.7 g/$m^2$, respectively, and the total uptake of N and P by the reeds were calculated as 24.39 and 4.73 g/$m^2$, respectively. Average removals of about 17% of N and about 49% of P by reeds were recorded. The N and P concentrations in AG tissues were significantly different among the three zones of the system:near to inflow(St1), in the middle of system(St2), and near to outflow(St3). The N and P concentrations in BG tissues were also significantly different among St1, St2 and St3. N and P concentrations in AG and BG tissues of reeds growing in St1 were higher than those in St2 and St3. The height and density of shoots of reeds in St1 were larger than those in St2 and St3. Significant amounts of N and P in the influent were taken up by reeds in St1.
1989년 9월부터 1990년 8월까지 국제 원자력기구의 지역 계획에 의해 국내 26개 (후반부 31개)의 기관이 참가하여 T3, T4, TSH를 측정하여 결과를 모으고, 외부정도관적를 시행한 결과가 다음과 같다. 1) 외부정도관리를 위한 컴퓨터 소프트웨어를 작성하였다. 데이타의 입력, 정도 분석, 월별 보고, 분기별 보고 및 수행 분석 프로그램을 만들되 전체 검사실결과에서 추린 평균값(all laboratories trimmed mean: ALTM)으로 모집단평균을 삼아 편차, 편이, 편이평균 그리고 이들의 경시적 변화를 분석하도록 하였다. 2) 전후반 2회에 나누어 만든 및치 사이의 편차는 유의하지 않았다. T3값의 변이계수는 7.2%이하(정상 T3 값) 또는 9.2%와 13.4%사이 (높은 T3 값), 74 값의 변이계수는 4.6%이하(정상 또는 높은 T4값), 5.4%와 9.5%사이(낮은 T4값)이었다. TSH는 정상범위 값에서 21.7%이하의 변이 계수를 보였고 정상보다 낮거나 높은 TSH의 풀은 8 7%와 21.2%사이의 변이제수를 보였다. 3) 전체 검사실 추린 평균값(ALTM)에 따른 변이계수의 변동은, ALTM이 정상 T4값범위일 때 변이계수는 15%이하이었고, 낮은 T4값일 때는 중간값이 15%이고 분포범위는 50%까지이었다. T3값의 변이계수는 대체로 20%이하이었다. TSH의 변이계수는 1mU/L를 전후로 급격히 상승하여 200%에 달하였다. 4) 3표준편차보다 높거나 낮은 값을 보인 검사실들의 분포는 전체 검사실결과에서 추린 평균값(ALTM)과 상관없었다. 5) 첨가한 T3, T4, TSH에 대한 회수율은 T4는 104, 106%, T3는 67%, 74%, TSH는 87%, 86%이었다. 이상과 같이, 저자들이 만든 소프트웨어 프로그램으로 외부정도관리를 위하여 쉽게 데이터를 분석하고 보고서를 작성하여 갑상선호르몬의 경사신뢰도를 평가할 수 있게 되었으며, 위에 요약한 첫 해의 외부정도관리 결과를 바탕으로 참가기관의 동의하에, 앞으로 정도관리 항목의 확대와 외부정도관리의 지속적인 시행이 바람직하다고 생각하였다.
사용자들의 추천 서비스를 위해 다른 사용자들의 평가값을 이용하여 특정 사용자에게 서비스를 추천해 주는 추천 시스템은 협력적 필터링 방법을 널리 사용되고 있다. 하지만 이러한 추천시스템은 클러스터링 과정에서 이미 분류된 그룹에 특정 사용자가 분류되어 정확히 분류되지 못하고, 사용자들의 평가값 오차가 클 경우 정확하지 못한 결과를 추천할 수 있다. 본 논문에서는 예측 정확도를 높이기 위하여 특정 사용자의 분류 항목을 기준으로 재분류하고, 시간적으로 임계치를 넘어 선 사용자의 평가값을 찾아내어 보정한 후 협력적 필터링에 적용한 추천 시스템을 제안하였다. 본 시스템에서는 클러스터링 과정에서 이미 분류된 그룹에 특정 사용자를 분류하는 것이 아니라, 특정 사용자를 기준으로 그룹을 재편성하는 방법을 사용하였다. 또한 평가 정보를 표본 절사평균에서 하위 10%를 절사하여 평가 정보들을 보정하고, 나머지 자료들은 시간에 따른 가중치를 적용하였다. 실험 결과 제안한 방법은 일반적인 협력적 필터링보다 MAE를 사용할 경우 예측 정확도가 14.9% 정도 우수함을 보였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.