• 패션비즈니스
• /
• 제5권4호
• /
• pp.27-36
• /
• 2001

The purpose of this study is to classify of the Metal Feathered Trim in old tombs. First, Feathered Trim is 5 types, Feathered Trim I-A, Feathered Trim I-B, Feathered Trim II-A, Feathered Trim II-B, Feathered Trim II-C in according to upper part of central insert plate style. Feathered Trim I-A, I-B, II-B type was general style that was found in most of the old tombs in ancient Silla, Gaya. Feathered Trim II-A type was excavated from the only Silla tombs and II-C type was excavated from Gaya tombs. Feathered Trim I-A type was worn previous to I-B type, and II-B, C type was worn previous to II-A type. Feathered Trim 5 types was influenced by the scythe style that was 'Scythe-shaped' tail.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제21권1호
• /
• pp.52-57
• /
• 2015

본 논문에서는 SSD의 TRIM 명령어 처리 성능을 LBA 범위의 특성 및 개수에 따라 분석하고, 그 결과를 바탕으로 Ext4 파일 시스템에서의 TRIM 명령어 처리 성능을 개선하였다. 대부분의 SSD에서 LBA 범위의 크기가 크고, 섹터 번호가 정렬 및 연속되어 있으며, 하나의 TRIM 명령어로 다수의 LBA 범위 정보를 전달할수록 TRIM 명령어의 처리 성능이 증가하는 것으로 나타났다. 한편, 기존의 Ext4 파일 시스템은 이와 같이 다수의 LBA 범위 정보를 전달할 때 그 성능이 더 높음에도 불구하고, 하나의 TRIM 명령어 당 하나의 LBA 범위 정보만 전달하는 문제점을 가지고 있다. 이를 해결하기 위해 하나의 TRIM 명령어로 최대 64개의 LBA 범위 정보를 전달하도록 Ext4 파일 시스템을 개선하였고, Filebench를 이용한 성능 평가에서 파일 삭제 성능이 최대 35% 증가하는 것을 확인하였다.

• 수산해양교육연구
• /
• 제27권6호
• /
• pp.1865-1871
• /
• 2015

Ship's trim is the one of the most important factor for safety at the sea. Turning circle test and Z-test were carried out to find the effect of ship's trim and draft changes. The results are as follows. 1. If the ship's draft and trim became large, turning circle would be wide. 2. If the ship's draft and trim became large, ship's drift angle would be small. Small drift angle made wide turning circle. 3. Trim by the head made slow ship's final speed when turning circle test. 4. By Z-test, the deeper draft and trim by the stern made small OSA. Small OSA means strong ship's stability. 5. Totally 2nd OSA is smaller than 1st OSA on Z-test. 6. There were small differences of 2nd OSA in trim by the stern, but there were large OSA in trim by the head. 7. The larger trim by the stern, the smaller OSW. The small OSW means better ship's stability and maneuverability.

• 대한조선학회지
• /
• 제4권1호
• /
• pp.49-54
• /
• 1967

The authors considered the effects of trim in the small coastal passenger boat upon resistance in this paper. Any change of trim no matter how small, necessarily produces some effect upon resistance. The relations between the resistance coefficients and trim were investigated through the towing test of the Model $MCI-P_1-65$, Korean Standardized Ship, GT 70 tons passenger boat in the gravitational tank. The Lines of the Model are given in Fig. 1. Principal dimensions and other characteristics vary with the trim in general. Those values varied with the trim for $MCI-P_1-65$ are tabulated in table 1. The resistance was measured at five conditions such as even keel, 0.0273L, (original designed trim) 0.0473L, 0.0663L, 0.0873L trim by the stern, fixing the displacement corresponding to the designed load water line. Model was made of wood in length of 3.5 feet coated with varnish, and without appendages. As the artificial turbulent stimulator, the sand strip method was used. The results of model towing tests, correcting to water temperature of $70^{\circ}F$, were expanded to full scale using the Schoenherr's friction formula and surface roughness allowance coefficient of 0.0004. The authors point out, the following results. 1) Optimum trim which gives the minimum resistance exists for every speed at constant displacement and each comes to the same value. For $MCI-P_1-65$ optimum trim is 0.0673L trim by the stern(Fig.4-The cross curves of the resistancecoefficients). 2) At constant displacement, when LCB(longitudinal position of center of buoyancy) varies with the trim, there exists optimum value of LCB which gives minimum resistance for every speed and each comes to the same value. For $MCI-P_1-65$ optimum position of LCB is 8%L aft from midship section (Fig.6).

• 정보처리학회논문지:컴퓨터 및 통신 시스템
• /
• 제4권9호
• /
• pp.307-314
• /
• 2015

최근 보조기억장치 스토리지 시장 추세는 HDD와 SSD가 혼용되어 사용되고 있다. 미래에는 HDD보다 SSD가 보조기억장치 역할로 더욱 많이 사용될 것으로 예상되고 있다. SSD 기술이 발달하면서 이를 효율적으로 사용하기 위해 TRIM 명령기법이 나오게 되었다. TRIM 명령기법은 과거 SSD의 문제점인 Freezing 현상을 해결하기 위해 나온 명령으로 운영체제와 SSD가 협동하여 작동한다. TRIM 명령기법은 사용자가 데이터를 삭제하였을 때 SSD 내부에서도 실제로 삭제하는 기법으로 유휴시간에 수행한다. 하지만, 디지털 포렌식 관점에서 본다면 디지털 범죄는 매년 급증하지만 데이터 미복구로 인한 검거율은 미흡하다. 본 논문에서는 기존 TRIM 명령의 장점인 안정성(Freezing Solution)과 쓰기 속도를 최대한 지원하며 선별적으로 데이터를 관리하여 삭제하는 기법을 제안한다. 실험을 통해 기존 기법과 선별된 기법의 성능을 측정하여 검증한다.

• 한국기계가공학회지
• /
• 제21권8호
• /
• pp.19-24
• /
• 2022

We developed a prototype from the design of a trim, which is the most important in the localization development of a 1500 Ib high-differential pressure-control valve used for boiler feedwater, and measured the flow coefficient, the most basic design data for valves. The following conclusions were drawn. The comparison of the design values of the flow coefficients for the existing X-trim and the multicore trim designed for localization development showed that they were almost identical, and the X-trim value was slightly lower. The comparison of the X-trim and multicore trim based on the valve flow coefficient test showed that they were generally similar, indicating no problem with the design. In the future, we plan to compare and analyze the flow paths for the X-trim and multicore trim via flow analysis.

• 대한조선학회지
• /
• 제8권1호
• /
• pp.29-40
• /
• 1971

In order to study the problem on form factor of hull form, towing test of a full ship model was carried out for different initial trims under both full and half load conditions. The results were fully discussed on the mutual relations among initial trim, mean sinkage and trim change in run, and form factor. There exists optimum initial trim in regard to form factor. Mean sinkage and trim change in run can be expressed in a uninominal approximation in the form of $k_i{\cdot}{F_n}^{2.2}$. The coefficients of this approxmation are related linearly with the initial trim. Form factor changes according to Froude number. It is considered that the trim change in run is a main reason of the fact.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.392-392
• /
• 2000

This study performs optimization of paper mill scheduling using MINLP(Mixed-Integer Non-Linear Programming) method and 2-step decomposing strategy. Paper mill process is normally composed of five units: paper machine, coater, rewinder, sheet cutter and roll wrapper/ream wrapper. Various kinds of papers are produced through these units. The bottleneck of this process is how to cut product papers efficiently from raw paper reel and this is called trim loss problem or cutting stock problem. As the trim must be burned or recycled through energy consumption, minimizing quantity of the trim is important. To minimize it, the trim loss problem is mathematically formulated in MINLP form of minimizing cutting patterns and trim as well as satisfying customer's elder. The MINLP form of the problem includes bilinearity causing non-linearity and non-convexity. Bilinearity is eliminated by parameterization of one variable and the MINLP form is decomposed to MILP(Mixed-Integer Linear programming) form. And the MILP problem is optimized by means of the optimization package. Thus trim loss problem is efficiently minimized by this 2-step optimization method.

• 소성∙가공
• /
• 제24권2호
• /
• pp.77-82
• /
• 2015

By investigating the practical use of trim punch configurations for shearing of vehicle panels, the current study first reviews the shearing angle as part of the shearing die design. Based on this review, four different types of trim punch shapes (i.e., horizontal, slope, convex, and concave type) and shearing angles(i.e., 0.76°, 1.53°, 2.29°, 3.05°, 3.81°) were investigated. In order to conduct shearing experiments, four types of trim punch dies were made. The four trim punch dies were tested under various conditions. The experiments used the four trim punch shapes and the five shearing angles. The shearing force varied by shape and decreased from horizontal, slope, convex, to concave for the same shearing angle. The magnitude of shearing force showed differences between the convex and the concave shapes due to the influence of constrained shearing versus free shearing. The test results showed that compared to the horizontal trim punch shearing force, the decrease of the slope, convex, and concave shearing forces were 22.6% to 60.4%. Based on the results, a pad pressure of over 30% is suggested when designing a shearing die.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권2호
• /
• pp.186-196
• /
• 2017

In order to resolve the trimming difficulty in rotor CFD calculations, a high-efficiency and improved "delta trim method" is established to compute the blade control settings that are necessary to identify the blade motion. In this method, a simplified model which combines the blade element theory and different inflow models is employed to calculate the control settings according to the target aerodynamic forces, then it is coupled into a CFD solver with unsteady Navier-Stokes equations by the delta methodology, which makes the control settings and aerodynamics calculated and updated in the meantime at every trim cycle. Different from the previous work, the current research combines the inflow model based on prescribed wake theory. Using the method established, the control settings and aerodynamic characteristics of Helishape 7A, AH-1G and Caradonna-Tung rotors are calculated. The influence of different inflow models on trimming calculations is analyzed and the computational efficiency of the current "delta trim method" is compared with that of the "CFD-based trim method". Furthermore, for the sake of improving the calculation efficiency, a novel acceleration factor method is introduced to accelerate the trimming process. From the numerical cases, it is demonstrated that the current "delta trim method" has higher computational efficiency than "CFD-based trim method" in both hover and forward flight, and up to 70% of the amount of calculation can be saved by current "delta trim method" which turns out to be satisfactory for engineering applications. In addition, the proposed acceleration factor shows a good ability to accelerate the trim procedure, and the prescribed wake inflow model is always of better stability than other simple inflow models whether the acceleration factor is utilized in trimming calculations.