• 한국연소학회:학술대회논문집
• /
• 2003.05a
• /
• pp.153-158
• /
• 2003

Catalytic Combustion used to be applied to specific conditions because of the characteristics different from flame combustion. However, many researches are focused on widening the applicant range of catalytic combustion with the competences of catalytic combustion. The development of many catalytic combustion appliances is one of the trials to overcome the restrictions of reaction and maximize the merits. In this research, past developments of appliances are depicted and new conceptual system will be introduced - sequential system. Sequential catalytic combustion system is composed of units - existing catalytic heat exchangers. This system is performed with parallel in composition and serially in operation. First, the burden of the preheating can be dramatically reduced. Second, stable operation control is expected. Lastly, Capacity expansion is flexible.

• Journal of the Korean Institute of Navigation
• /
• v.24 no.5
• /
• pp.435-441
• /
• 2000

This paper deals with the development of RACOM(Radar Signal Detecting ＆ Processing Computer). RACOM is a radar display system specially designed for radar scan conversion, signal processing and PCI radar image display. RACOM contains two components； i )RSP(Radar Signal Processor) board which is a PCI based board for receiving video, trigger, heading & bearing signals from radar scanner ＆ tranceiver units and processing these signals to generate high resolution radar image, and ⅱ）Applications which perform ordinary radar display functions such as EBL, VRM and so on. Since RACOM is designed to meet a wide variety of specifications(type of output signal from tranceiver unit), to record radar images and to distribute those images in real time to everywhere in a networked environment, it can be applicable to AIS(Automatic Identification System) and VDR(Voyage Data Recorder).

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2126-2128
• /
• 2000

A TVS(triggered vacuum switch) use in high-power, high-current, and high-frequency conversion and switching circuits. The TVS has a six-gap trapezoidal rod electrode system. The electrode system consists of three cathode and anode rods which are made with OFHC. The trigger unit of the TVS is located at the cathode base center. To obtain a wide variety of characteristics this paper describes the results of tests.

• Archives of Plastic Surgery
• /
• v.48 no.3
• /
• pp.333-335
• /
• 2021

In this report, we discuss the postoperative protocol for patients undergoing lymphaticovenous anastomosis (LVA) in our unit. Immediately after LVA, the incision site is closed over a small Penrose drain and a simple gauze dressing is applied without compression. In the first 5 days, ambulation is allowed, but limb elevation is actively encouraged to promote lymphatic flow across the newly formed anastomosis. Prophylactic antibiotics are routinely given to prevent infection because this patient group is susceptible to infections, which could trigger thrombosis in the anastomosis.

• Journal of Oral Medicine and Pain
• /
• v.30 no.3
• /
• pp.345-351
• /
• 2005

The purpose of this double-blind study was to evaluate clinical effects of botulinum toxin type A (BTX-A) injection on myofascial pain syndrome (MPS) involving upper trapezius and compare with those of lidocaine injection. 21 patients presenting with active TrP1 and/or TrP2 in the upper trapezius over 6 months were selected for this study. The subjects were randomly divided into two groups; one group injected with BTX-A (15 unit of $Botox^{(R)}$ / 0.3 ml per trigger point (TrP)) and the other group injected with 0.5% lidocaine (0.3 ml /TrP). The clinical effects were evaluated by VAS and PPT at baseline, 2, 4, 6 and 8 weeks after treatment. BTX-A group showed persistent decrease of VAS values and increase of PPT values following treatment. While there was no significant difference in VAS values between BTX-A and lidocaine groups (p=0.347), there was significant difference in PPT values after treatment between two groups (p=0.000). The subjects received BTX-A showed noticeable improvement in PPT values after treatment, suggesting more reliable effect of BTX-A injection compared with lidocaine injection. The results of this study support that the direct injection of BTX-A to a TrP is an effective and safe treatment for MPS involving upper trapezius.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.1 no.1
• /
• pp.22-32
• /
• 2002

This paper describes about non-burial AVI (Automatic Vehicle Identification) system using general vehicle as probe car for obtaining more accurate traffic information while conserving road pavement surface. Existing spot traffic detectors have their own limits of not obtaining right information owing to its mathematical method. Burial AVI systems have some defects, causing traffic jam, needing much maintenance cost because of frequent cutting of loop and piezo-electric sensors. Especially, they have hard time to make right detection, when it comes to jamming time. Therefore, in this paper, we propose non-burial AVI system with laser trigger unit. Proposed non-burial AVI system is developed to obtain regional traffic information from normal Passing vehicle by automatic license number recognition technology. We have adapted it to national highway section between Suwon city and Pyong$\~$Taek city(9.5km) and get affirmative results. Vehicle detection rate of laser trigger unit is more than 95$\%$, vehicle recognition rate is 87.8$\%$ and vehicle matching rate is about 14.3$\%$. So we regard these as satisfying results to use the system for traffic information service. We evaluate proposed AVI system by regulation of some institutions which are using similar AVI system and the proposed system satisfies all conditions. For future study, we have plan of detailed research about proper lane number from all of the target lanes, optimal section length, information service period, and data fusion method for existing spot detector.

• Journal of Korean Home Economics Education Association
• /
• v.21 no.2
• /
• pp.45-60
• /
• 2009

This study is intended to implement an e-Learning system assisted class for the dress unit in the subject of technology & home economics in the middle school. This class is aimed at making teaching-learning in the dress unit effective, triggering students' interest in it, enhancing their understanding and offering basic materials for the e-Learning development about clothing instruction in the subject of technology & home economics. To make the concrete situational learning effective and provide realistic learning environments, learning contents were implemented so that the learners themselves could manipulate the contents by clicking. How to wear clothing according to learners' individuality was presented in order to trigger the learners' attention and motivation using the latest clothing pictures from the Internet shopping mall, and the dress fashion pictures of their peers. The result of this study can be summed up as follows. First, the implementation of learning materials with which simulation manipulation and visualization were possible could make the students reach the learning goals easily. Second, teaching-learning activity could be made more effective using audios, images and moving pictures rather than written texts. Third, learning the dress unit, which is especially related with a new fashion, made the most of the advantage of e-Learning by providing realistic and lively learning materials in a timely manner. And it triggered learners' motivation by providing pictures or moving pictures related with their real life. Based on these research results, this study suggests further research to develop e-Learning contents using various multimedia authoring tools as well as the ones applied to this study in learning the dress unit. It also suggests that the database of teaching-learning materials be constructed to securely prepare abundant instruction materials.

• Journal of electromagnetic engineering and science
• /
• v.18 no.1
• /
• pp.20-28
• /
• 2018

The time synchronization of each sub-unit of a pulsed generator is important to generate an output high-power radio frequency (RF) signal. To obtain the time synchronization between an input RF signal fed by an external source and an electron beam produced by an electric pulse generator, the influence of different charging voltages on a delay and a rise time of the output pulse waveform in the electric pulse generator should be carefully considered. This paper aims to study the timing characteristics of the delay and the rise time as a function of different charging voltages with a peak value of less than -35 kV in the high-voltage pulse generator, including a trigger generator (TG) and a pulse-forming line (PFL). The simulation has been carried out to estimate characteristics in the time domain, in addition to their output high-voltage amplitude. Experimental results compared with those obtained by simulation indicate that the delay of the output pulses of the TG and PFL, which are made by controlling the external triggering signal with respect to different charging voltages, is getting longer as the charging voltage is increasing, and their rise times are inversely proportional to the amplitude of the charging voltage.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.03a
• /
• pp.183-187
• /
• 1996

On the machine measuring system composed of touch trigger probes, a DNC module, a CMM module, an analysis module and a man-machine interface unit was developed. Measuring accuracy is affected by working accuracy of the on the machine measuring system. The working accuracy of the system is due to geometric errors of th machine tool, servo errors of feed drives and positioning errors of probes. In order to compensate for the measuring errors due to the working accuracy, a calibration module was developed. The measuring automation system was realized with the on the machine measuring system and an IBM-PC on the machine center through a RS-232C. It turns the machining machine (CMM). The system is used for dimensional checking of machined components. initial job setup, part identification, identification of machining errors due to deflection and wear of tools. cutter run out, and calibration of machine tools. A horizontal machining center equipped with FANUC OMC wre used for verification of the system. The validity and reliability of the system. The validity and reliability of the system were confirmed through a series of experiments with gage blocks, ring gages, comparison measurement with a commercial CMM, and so on.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.3
• /
• pp.249-255
• /
• 2002

This paper describes on the extraction of ship's real-time movement information using a combination full-function ARPA radar and ECS system that displays radar images and an electronic chart together on a single PC screen. The radar target extractor(RTX) board, developed by Marine Electronics Corporation of Korea, receives radar video, trigger, antenna bearing pulse and heading pulse signals from a radar unit and processes these signals to extract target information. The target data extracted from each pulse repetition interval in DSPs of RTX that installed in 16 bit ISA slot of a IBM PC compatible computer is formatted into a series of radar target messages. These messages are then transmitted to the host PC and displayed on a single screen. The position data of target in range and azimuth direction are stored and used for determining the center of the distributed target by arithmetic averaging after the detection of the target end. In this system, the electronic chart or radar screens can be displayed separately or simulaneously and in radar mode all information of radar targets can be recorded and replayed In spite of a PC based radar system, all essential information required for safe and efficient navigation of ship can be provided.