• 해양환경안전학회지
• /
• 제8권1호
• /
• pp.101-108
• /
• 2002

This experimental study was performed to investigate internal flow and unsteady flow characteristics using a model for actual shape of a Plate heat exchanger and visualization of flow through the particle image velocimetry. Seven Reynolds numbers were selected by calculation with the height of grooved channel and sectional mean velocity of inlet flow in the experiment, and instantaneous velocity distributions and flow characteristics were experimently investigated. The triangular grooved channel had a compound flow consisting of the flow in lower channel and the groove flow receiving shear stress by the channel flow in the experiment. The sheared mixing layer, in the boundary between the triangular groove and the channel. affected main flow to raise turbulent in the channel.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권5호
• /
• pp.600-608
• /
• 2003

This Paper describes a detailed experimental investigation of heat transfer in a reciprocating smooth rectangular duct having only the bottom wall heated with reference to the design of a piston for a marine propulsive diesel engine The Parametric test matrix involves Reynolds number and reciprocating radius, respectively, in the range of 1.280∼4.100, and 7∼15 cm with five different reciprocating frequency tested. namely. 1.7, 2.2, and 2.6 Hz. The effects of three different hemi-triangular wavy type tapers on the heat transfer in the reciprocating rectangular channel using the air as a working fluid were check out. The present work confirms that the Nusselt number in the channel with the triangular wavy type taper is lower than without the triangular wavy type taper.

• 대한기계학회논문집B
• /
• 제31권7호
• /
• pp.628-634
• /
• 2007

The present study investigated the heat/mass transfer characteristics in an equilateral triangular channel simulating the leading edge cooling passage in gas turbine blade. Using naphthalene sublimation method and pressure measurement experiments, local mass (heat) transfer and pressure coefficients were obtained. The experiments were conducted with three rotating numbers between 0.0 and 0.1; two channel orientations of $0^{\circ}$ (model A) and $30^{\circ}$ (model B); the fixed Reynolds number of 10,000. The results showed that the channel rotation caused the heat transfer discrepancy between suction and pressure sides. Due to the secondary flow induced by Coriolis force, the high heat transfer appeared on the pressure side. When the channel orientation was $30^{\circ}$ (model B), the secondary flow caused the more uniform heat transfer distribution among leading edge and inner wall on pressure side than that of the model A.

• 한국유체기계학회 논문집
• /
• 제15권4호
• /
• pp.19-26
• /
• 2012

In this paper, a parametric study on ribs which are installed in an equilateral triangular internal cooling channel is presented. The numerical analysis of the flow structure and heat transfer characteristics is performed using three-dimensional Reynolds-averaged Navier-Stokes equations with the shear stress transport turbulence model. The numerical results are obtained at Reynolds number, 20,000. The parametric study is performed for the parameters, the angle of a rib, rib pitch-to-hydraulic diameter ratio, rib width-to-hydraulic diameter ratio, and rib height-to-hydraulic diameter ratio. The computational results are validated with the experimental data for area-averaged Nusselt number.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.859-863
• /
• 1987

In this paper, a relationship between difference triangular sets and sum triangular sets is developed to evaluate the weighted number of the third-order intermodulation products. In addition, a lower bound of the intermodulation products falling into the worst signal channel has been derived using the relationship between difference triangular sets and sum triangular sets. The formulas of the lower bound are useful for estimating the intermodulation impairment level in satellite communication systems.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2005년도 연구개발 발표회 논문집
• /
• pp.459-466
• /
• 2005

The present study investigates the heat transfer characteristics of a triangular channel. Three different rib configurations are tested. The ribs are installed on two sides of the channel. The rib height (e) to channel hydraulic diameter is 0.079 and the rib-to-rib pitch (p) is 8 times of the rib height. The rotation number ranges from 0.0 to 0.1 while the Reynolds number is fixed at 10,000. The copper blocks with heaters are installed on the channel walls to measure the regionally averaged heat transfer coefficients. For the stationary $45^{\circ}$ and $135^{\circ}$ ribbed channels, a pair of counter rotating vortices is induced by the angled rib arrangements, and high heat transfer coefficients are obtained on the regions near the inner wall for the $45^{\circ}$ ribbed channel and near the leading edge for the $90^{\circ}$ ribbed channel. The heat transfer coefficients of angled ribbed channels are changed little with rotation, whereas those of the transverse ribbed channel are changed significantly with rotation.

• 해양환경안전학회:학술대회논문집
• /
• 해양환경안전학회 2005년도 추계학술대회지
• /
• pp.159-163
• /
• 2005

채널 내부의 비정상 흐름을 규명하기 위하여 실제 사용 중인 판형 열교환기 모델을 대상으로 가시화 실험과 입자영상유속계(PIV)를 사용한 계측을 수행하였다. 실험은 기복을 가지고 있는 채널의 높이와 내부유동의 부분 평균속도벡터에 따른 7가지 종류의 레이놀즈수를 적용하였고, 순간속도벡터분포와 유동특성을 고찰하였다. 실험에서 삼각형상 그루브 채널은 하부 채널과 채널 흐름에 의해서 받고 있는 전단응력의 그루브 흐름과의 관계에서 복합적인 흐름의 형태로 나타났다. 삼각형상 그루브와 채널 사이의 경계인 전단혼합층은 채널에서 난류강도가 상승하는 주흐름에 영향을 미쳤다.

• 센서학회지
• /
• 제16권2호
• /
• pp.115-119
• /
• 2007

We report electrokinetic streaming potential detection in a microchannel. Streaming potential, one of the representative electrokinetic phenomena, becomes noticeable either when the channel size reduces or when the concentration of electrolyte reduces. We suggest a triangular-shaped microchannel to enhance streaming potential. The triangular-shaped microchannel shows better performance than the straight one in terms of streaming potential. Couple of possible methods to enhance streaming potential is also discussed. Moreover, this type of channel and phenomenon can be applied to biological sensor application and energy transduction.

• 수산해양기술연구
• /
• 제42권2호
• /
• pp.86-96
• /
• 2006

This research aims at establishing the fundamental characteristics of the kite through the analysis of the flow field around various types of kites. The approach of this study were adopted for the analysis; visualization by PIV(particle image velocimetry). Also, the lift and drag tests of kites had been performed in our previous finding(Bae et al., 2004a; Bae et al., 2004b). For this situation, models of canvas kite were deployed in the circulating water channel for the PIV test using the same conditions as in the lift and drag tests. The results obtained from the above approach are summarized as follows: Given the rectangular and triangular kites when attack angle is $20^{\circ}$, vortex by the boundary layer separation was seen in the leading edge and the flow towards the trailing edge was more turbulent. But, the inverted triangular type kite was seen to be stable without any boundary layer separation or turbulence. The increase of the attack angle resulted in the eddy in order of the rectangular, triangular and inverted triangular type. The magnitude of the eddy followed the same order. The effect of edge-eddy was biggest in the triangular type followed by the rectangular and then the inverted triangular type. The kite as the buoyancy device or the opening device will be very useful when the appropriate applications and the stability are met.

• 해양환경안전학회지
• /
• 제20권2호
• /
• pp.241-246
• /
• 2014

본 연구에서는 수중 삼각형상구조물의 경사도와 레이놀즈 수 변화에 따른 구조물 주위의 유동특성을 분석하였다. 모델링한 삼각형상구조물 주위의 유동장은 회류수조에서 가시화실험과 입자영상유속계(PIV)를 이용하여 계측하였다. 실험결과 경사각이 $45^{\circ}$인 삼각형상구조물이 레이놀즈 수 $Re=2.9{\times}10^3$에서 구조물 높이의 2.7배까지 상승하는 속도성분이 나타났다. 레이놀즈 수가 일정할 때 경사각이 클수록 구조물 후방에 하강하는 속도성분이 크게 나타났고, y/hs=1.75이상의 영역에서는 경사각과 레이놀즈 수가 구조물 후방의 유동형태에 변화를 주지 않았다.