• 한국게임학회 논문지
• /
• 제14권2호
• /
• pp.55-66
• /
• 2014

영상 워핑은 입력 영상을 주어진 조건에 적합하게 변형하는 기술로, 최근 영화나 애니메이션 분야에서 캐릭터의 얼굴 형상을 변형하는데 활용되고 있다. 얼굴 특징을 기반으로 형상을 변형하는 워핑 방법 가운데 하나인 메쉬 워핑은 입력 영상에서 눈, 코, 입 주변의 사각형 모양의 메쉬 그룹을 형성하여 1:1정합시킴으로써 워핑 영상을 생성하는 방법이다. 이는 메쉬 제어점 좌표에 오차가 있거나 작은 면적의 메쉬로 세분화되어 생성된 경우 메쉬들의 경계 선분에서 결과 영상이 일그러지는 문제점이 있다. 본 연구는 얼굴의 자연스러운 워핑 영상을 생성하는 과정에서 오류 발생을 최소로 하며 정확한 결과를 적은 연산량과 시간에 처리하기 위해 삼각형기반의 영상 보간 기법을 제안한다. 우선 얼굴을 대표하는 특징점들을 찾고 이들을 연결하여 기본 삼각형 메쉬를 구성한다. 제안하는 방법은 기존의 메쉬 워핑과 비교하여 연산 처리량과 시간은 단축되면서 워핑 과정에서의 오류 발생을 줄일 수 있음을 실험으로 보인다.

• 대한인간공학회지
• /
• 제25권2호
• /
• pp.107-118
• /
• 2006

Recently, Korean's 3-D foot data have been extensively collected through 5th national anthropometric survey known as 'Size Korea'. In this study, Korean foot shape was investigated and subsequently classified, based on the existing standard for foot shaping. This study analyzed and categorized Korean foot shapes through the following methods. Although the data used in this study were limited to those of Korean adults, major factors affecting the foot shape were deduced and then categorically grouped by the multivariate statistical analysis. For those whose age ranged from 14 to 70, major factors affecting the foot shape for the male were related to foot breadth, ankle thickness, 1st toe shape, malleolus height, heel to top of the foot length, the ratio between toe-side and heel-side and 5th toe shape. For the female, the ball of foot height was added to the above factors. From the factors extracted, the Korean foot shape was categorized into three groups for the male and four groups for the female. They were the ladder type, the inverted triangle type and the square type. For the female, the triangular type was added to the three types. These findings will serve as useful information for the footwear production industry in Korea.

• 패션비즈니스
• /
• 제8권1호
• /
• pp.76-90
• /
• 2004

The purpose of this study was to classify women's face types and to analyze the measurement of face types. For study, 180 adult women(aged between 20 and 29) in Pusan and Ulsan area was sampled to be measured for facial types. Data were analyzed by Frequencies, Means, Duncan's Multiple Range Test, Distinction analysis. The major results were as followed. Women's face types were classified by 6 types and there were round shape(29.4%), oblong shape(18.9%), inverted triangle shape(16.1%), square shape(13.9%), egg shape(11.7%), diamond shape(10.0%) in the subject. Phyiognomic facial height was 182.38mm, the upper face length was 59.82mm, the middle face length 60.82mm, the lower face length 61.76mm, and the index of face length to face breadth was 1.35. The face width was 134.90mm, interocular distance 34.75mm, the nose width 33.93mm, and mouth width was 43.87mm. And also, differences from those measurements like forehead breadth, face length/bizygion breadth, forehead slopper, bigonion breadth, bignathion breadth, bignathion slopper.

• 대한인간공학회지
• /
• 제36권4호
• /
• pp.305-323
• /
• 2017

Objective: The purpose of this study was to determine breast shape and ratio of breast enlargement women prior to development of breast enlargement patient's bra. Background: Although there are many previous studies on women's breast that did not undergo breast augmentation surgery, no studies have examined the breast type and proportion of women with breast augmentation. Method: In this study, we analyzed ratios and angles with photographs taken before and after breast augmentation on the frontal and lateral views of the breast, UPF and projection were analyzed too. We also compared the pre-operative and post-operative rates with those of previous breast studies, as well as the post-operative breast types for the desirable breast types. Results: The length and width of the breast base and the height of the breast projection increased after the operation. The rate of increase in width is larger than the vertical distance in the breast base, and the rate of increase in height of the projection is larger than the increase in the width. Specifically, in the vertical distance, the rate of increase in the lower portion is larger than that in the upper portion. In the width, the rate of increase on the inside is larger than that on the outside. Conclusion: The angles of the static relationship with the projection increased and the angles of the minor relation decreased. The changes in the size of the breast were visually observed in the overlapping of the triangle shape before and after the surgery. The changes were composed of the line connecting the angle and the measurement points. The pre-operative upper pole fullness (UPF) was mostly 0 and - 1, but after the surgery, +1, 0, -1, +2 were distributed, while post-operative levels of projection were distributed in the order of level 3> level 1> level 2. In comparison with the desirable breast type, it was found that the anatomical type was a more natural breast type than the round type of implant. Application: These results can be useful as basic data for the breast analysis of breast enlargement patients and their bra patterns.

• 한국콘텐츠학회논문지
• /
• 제13권2호
• /
• pp.157-174
• /
• 2013

시판되는 전통복식을 착용한 패션인형의 경우 서구적 얼굴이 주를 이루어 한복과 조화를 이루지 못하고 있다. 본 연구는 전통 패션인형에 적합한 얼굴을 개발하여 현대인들의 컬렉션으로써 전통 패션인형의 위상을 재정립하고자 문헌조사, 사례조사, 소비자 설문조사를 실시하고 이 결과를 토대로 얼굴을 디자인하였다. 전통복식을 착용한 패션인형의 얼굴형은 청순한 역삼각형이 많이 나타났으나 선호된 얼굴형은 역삼각형과 타원형이었고 이목구비는 자연스러운 조화를 이루는 세련된 느낌을 선호하였다. 전통 미인 얼굴은 타원형 얼굴형, 쌍꺼풀이 없거나 속 쌍꺼풀의 긴 눈, 도톰한 입, 코끝이 둥글고 오똑한 코를 선호하였다. 이상의 결과를 조합하여 볼을 약간 살린 역삼각형 얼굴형, 큰 눈과 눈동자를 축소하고 속눈썹 길이를 줄인 눈, 코끝이 들리지 않은 둥근 코, 폭이 작고 아랫입술이 도톰한 단정한 입으로 얼굴을 디자인하였다. 개발된 전통 패션인형 얼굴은 국내외 패션인형 마니아의 욕구에 부합하는 문화상품이 될 것이다.

• 한국의류학회지
• /
• 제30권5호
• /
• pp.722-732
• /
• 2006

The pattern making of the tight-fitting collars which often used in diving suits, dance wear, or cycle wear has not been fully established. To develop tight-fitting collar pattern directly from 3D images from the representative somatotypes, dressforms developed by Jaeun Jung were used. The 3D scan data of the four male dressforms were obtained using Exyma-1200. Triangle Simplification and the Runge-Kutta method were applied to reduce the 3D scan data points and to make the segmented triangular patches in a plane from 3D data. As results, apparent differences between the tight-fitting collar patterns obtained from the 3D scan data and the ordinary 2D collar patterns were found around the center back line. The curvatures of the center back line were higher in all types of the tight-fitting collar than in the ordinary collar pattern. Relative differences in the shape of collar lines among four representative Korean men were reported. To fit the curved shape of the back neckline, 1.8 cm should be reduced from the upper neckline in average. We suggested the direct pattern making method for the 2D tight-fitting collar patterns considering the 3D shape of various types of men's dressform.

• 복식
• /
• 제54권5호
• /
• pp.109-123
• /
• 2004

The purpose of this study is to examine features of parts of Jikryung and relations among the features. Results of the study can be described as follows. 1. The short front and long rear of Jikryung was changed into the long front and long rear of the dress in the late 16th century. Kalgit of quasi-square style as double collar was changed into that of common collar in the late 16th century and then into common semi-circle collar in the early 17th century, when double Sup was also changed Into single Sup. Narrow sleeves of Jikryung were replaced by bean chaff-shaped in the late 16th century and then by wide ones in the early period of the next century. The shape of the side hem of Jikryung was changed from rectangle into trapezoid in the early 17th century Triangle-shaped Moo was changed into trapezoid-shaped one in the late 16th century and then again into triangle in the late 17th century 2. Changes in shapes of the parts of Jikryung were made with them correlated. The collar of Jikryung saw change in its form from double to common as its width was reduced. Double Sup was changed into single one and the narrow, short coat string into the long one as Jikryung became a dress needing less adjustment. The sleeves widened as the length of whajang increased. The side hem of Jikryung saw change in its shape from rectangular to trapezoidal one as its position was changed. Trapezoidal Moo was replaced by triangular one as the sleeve of Jikryung was changed in shape. 3. Changes in shapes of the parts of Jikryung influenced the aesthetic beauty of the dress itself In its first period, Jikryung was simple with long, slim silhouettes. In its second period, the dress was rich with increased volume. Finally in its third period, the dress was characterized by the harmony of simpleness and richness.

• 대한조선학회논문집
• /
• 제56권2호
• /
• pp.128-134
• /
• 2019

In shipbuilding, accurate fabrication of curved hull plates is one of the most important steps, since the shape of ship hull, which is very critical in the overall performance of a ship, is a collection of such plates. The curved hull plates forming process requires a significant amount of time by skilled workers in shipbuilding. In general, the workers cause thermal distortion in the plate and forming initial shape using gas heat source. So shipbuilding companies need skilled workers who have long experience. To solve the problem, a lot of researchers tried to develop automation system for curved hull plates. In this paper, we propose automatic heating system with gantry robot, high frequency induction heater to replace the gas heat source and automatic measurement system. We apply the system to forming concave type plate that is actually used in ship manufacturing. In addition, a system was developed to automatically generate heating information, such as the heating location and the heating speed, for actual heating process. Then the system was applied to the actual heating material. It is shown that the proposed triangle heating pattern makes desired concave shape successfully. The induction heating system showed that it can be used for automation system of curved hull plates forming process replacing gas heat source.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.79-87
• /
• 2005

This paper summarizes the work on the development of a simulation program for modelling the process of machining quasi-three dimensional shape with the excimer laser beam on a constantly moving polymers. Relatively simple masks of rectangle, triangle and half circle shape are considered. The etching depth is calculated by considering the number of laser pulses irradiated on the specimen surface. It was found that similar shapes as experimental results can be obtained by choosing suitable parameters of moving velocity, moving distance and mask sizes.

• Restorative Dentistry and Endodontics
• /
• 제6권1호
• /
• pp.105-107
• /
• 1980

A total of 125 extracted maxillary first molars were used to study the configuration of the floor of the pulp chamber. The specimens were ground and the pulp chamber was examined with a magnifying glass and explored with sharp explorer. The study showed the shape of the pulp chamber, number of root canals, and type of canal orifice. The results were as follows; 1. In so far as observing the shape of the pulp chamber of the teeth, 50.4% of the teeth were trapezoid, 20.8% were inverted trapezoid, 18.4% were rectangle and 10.4% were triangle shape. 2. 71.2% of the specimens have 3 root canal orifices, and 28.8% have 4 root canal orifices. 3. 71.2% of the specimens have 1 mesiobuccal canal orifice, 23.2% have 2 mesio-buccal canal orifices joined by a groove, and 5.6% have 2 mesio-buccal canal orifices seperated each other.