• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.53-59
• /
• 1997

In this paper, we present a 20 GHz low-loss dual-mode channel filter designed by using mode matching method. The performance of dual-mode channel filter mainly depends on iris characteristics. Therefore the exact design of iris is the key point to get good frequncy response of the filter. MOde matching technique is widely used ot design several kinds of waveguide filters because it is simple in theory and can easily calculate the scattering matrices at the discontinuities with simple structure like iris coupled filters. Additionally the effect for finite thickness of the iris in the dual-mode cavity iflter is analyzed by te full-wave method, providing the exact filter implementation without trial and error.

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10b
• /
• pp.729-733
• /
• 1988

In this paper, a new procedure for selecting weighting matrices in linear discrete time quadratic optimal control problems (LQ-problem) is proposed. In LQ problems, the quadratic weighting matrices are usually decided on trial and error in order to get a good response. But using the proposed method, the quadratic weights are decided in such a way that all poles of the closed loop system are located in a desired area for good responses as well as for stability and values of the quadratic cost functional are kept less then a specified value. The closed loop systems constructed by this method have merits of LQ problems as well as those of pole assignment problems. Taking into consideration that little is known about the relationship among the quadratic weights, the poles and the values of cost functional, this procedure is also interesting from the theoretical point of view.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.3
• /
• pp.263-269
• /
• 1999

In this paper, an unifying design algorithm is presented for efficient digital implementation of continuous PID controller using general discrete orthogonal functions. The proposed algorithm is an algebraic method to determine controller parameters, which can unify controller design procedures divided into three ways. A set of linear equations for the controller design are derived from simple algebraic transformation based on general discrete orthogonal functions. By solving these equations, all of the controller parameters can be determined directly and simultaneously, which thus makes the design procedure systematic and straightforward. It does not involve any trial and error procedure, hence the difficulty of conventional approach can be avoided. The simulation results and discussions are given to demonstrate the efficiency of the proposed method.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.7
• /
• pp.634-642
• /
• 2004

Unlike actual vehicles, a vehicle driving simulator is limited in kinematic workspace and bounded on dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model. In order to overcome these problems, a washout algorithm which controls the workspace of the simulator within the kinematic limitation is needed. However, a classical washout algorithm contains several problems such as generation of wrong sensation of motions by filters in tilt coordination, requirement of trial and error method in selecting the proper cut-off frequencies, difficulty in returning the simulator to its origin using only high pass filters and etc. This paper proposes a new tilt coordination method as an algorithm which gives more accurate sensations to drivers. In order to reduce time for returning the simulator to its origin, a new washout algorithm that the proposed algorithm selectively onset mode from high pass filters and return mode from error functions is proposed. As a result of this study, the results of the proposed algorithm are compared with the results of classical washout algorithm through the human perception models. Also, the performance of the suggested algorithm is evaluated by using human perception and sensibility of some drivers through experiments.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.6
• /
• pp.16-20
• /
• 2010

This study proposes a structural design method for the upper control arm installed at the rear side of a SUV. The weight of control arm can be reduced by applying the design. In this research, the former includes optimization technology, and the latter the technologies for selecting aluminum as a steel-substitute material. Strength assessment is the most important design criterion in the structural design of a control arm. At the proto design stage of a new control arm, FE (finite element) analysis is often utilized to predict its strength. In this study, the kriging interpolation method is adopted to obtain the minimum weight satisfying the strength constraint and durability criteria. The optimum results determined from the in-house program are compared with those of ANSYS WORKBENCH. The durability assessment is obtained by a index of fatigue durability and trial & error method, MSC. Fatigue program.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.05a
• /
• pp.108-111
• /
• 2002

It is important to predict forming procedure for minimizing trial-and-error in the application of cold forging of gears. In this study, 3-dimensional simulations of cold forging processes of spur and bevel gear were carried out using finite element method to investigate the characteristics of the processes. From the simulation result it was found that incomplete teeth forming of spur gear was occurred with increase of teeth number in forging by forward extrusion. It can be reduced through division of material flows at the initial forming state using forward/backward combined extrusion.

• Journal of Mechanical Science and Technology
• /
• v.19 no.spc1
• /
• pp.272-282
• /
• 2005

A vehicle driving simulator is a virtual reality device which makes a man feel as if he drove an actual vehicle. Unlike actual vehicles, the simulator has limited kinematical workspace and bounded dynamic characteristics. So it is difficult to simulate dynamic motions of a multi-body vehicle model. In order to overcome these problems, a washout algorithm which controls the workspace of the simulator within the kinematical limitation is needed. However, a classical washout algorithm contains several problems such as generation of wrong sensation of motions by filters in tilt coordination, requirement of trial and error method in selecting the proper cut-off frequencies and difficulty in returning the simulator to its origin using only high pass filters. This paper proposes a washout algorithm with new tilt coordination method which gives more accurate sensations to drivers. To reduce the time in returning the simulator to its origin, an algorithm that applies selectively onset mode from high pass filters and return mode from error functions is proposed. As a result of this study, the results of the proposed algorithm are compared with the results of classical washout algorithm through the human perception models. Also, the performance of the suggested algorithm is evaluated by using human perception and sensibility of some drivers through experiments.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1729_1730
• /
• 2009

This paper presents comparative experimental results of PI sliding mode control and PI control for a heavy duty robot which can handle an object of 600kg, The gains of the PI control was determined by TAE(Trial and Error) method. This paper presents a novel approach for the decoupling of the states cross-coupling using sliding mode control. The sliding mode control methode is based on the error between reference speeds and the actual speed. The proposed method has the advantages of PI control performance and the sliding mode control robustness. Its first step is to design PI controller, then the sliding mode control input term is added to it. This makes actual implementation of the controller easier. The robot and motion controllers were designed and made by author. The good control performance of the heavy duty robot was obtained by using simple algorithm. This means that the robot was designed very well in control respect.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.3
• /
• pp.441-450
• /
• 2004

The velocity distribution of gas molecules from the experimental results was confirmed as the same with the Maxwell-Boltzmann's theoretical results within the experimental error. This study is on the realization of the Maxwell-Boltzmann's velocity distribution of gas molecules by the molecular dynamics(MD) method. The Maxwell-Boltzmann's velocity distribution of gas molecules is extremely important to confirm the equilibrium state because the properties of a thermodynamic system shall be obtained from the system's equilibrium configuration in the MD method. This study is the first trial in the successive researches to calculate the properties of a thermodynamic system by the computer simulations. We confirmed that the maxwell-boltzmann's velocity distribution is developed in some transient time after starting a simulation and dependent on the size of a system. Also it is found that the velocity distribution has no relation with an initial configuration of gas molecules.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.33 no.11
• /
• pp.1225-1232
• /
• 2009

This study suggests a structural design process for the upper control arm installed at a vehicle. Static strength and durability are the most important responses in the structural design of a control arm. This study considers the static strength in the optimization process. The inertia relief method for FE analysis is utilized to simulate the static loading conditions. According to the classification of structural optimization, the structural design of a control arm is included in the category of shape optimization. In this study, the metamodel technique using the kriging method is adopted to obtain the minimum weight satisfying the strength constraint. Then, the final design is suggested by considering the durability criteria. The durability assessment is obtained by the index of fatigue durability called the SWT (Smith-Watson-Topper) index. The final optimum shape has been proposed by trial and error method.