• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2000.05a
• /
• pp.51-52
• /
• 2000

전기아연도금강판은 표면이 미려하고 희생방식력이 뛰어나기 때문에 주로 자동차와 가전, 건자재 등에 많이 사용된다. 현재 냉연 표면처리 제품들은 연속도금공정에 의해 생산되고 있으며 고전류밀도에 의한 고속생산과 도늠액 제조와 조성이 비교적 단순해야 하는 여러 가지 이유로 염산욕과 황산욕을 가장 많이 사용하고 있다. 최근에 신설된 당사의 전기도금공정은 수직형으로 황산욕에서 불용성 양극을 채용하여 아연을 전기도금하고 있다. 일반적으로 황산욕은 염산욕 대비 전기 전도성이 나빠 과전압이 크게 걸리므로 불용성 양극을 사용하여 극간 거리를 최소화할 필요가 있다. 그러나 $Ir0_2$가 코팅된 불용성 양극은 가격이 비싸기 때문에 극간 거리를 너무 짧게 하면 깡대에 의해 손상을 받을 수가 있어 극간 거리를 줄이는데 한제가 있다. 따리서 용액의 전도도들 증가시켜 과전합을 줄이기 위해서는 타사에서 현재 사용하고 있는 황산나트륨, 황산칼륨, 황산암모늄 등에 대한 검토가 필요하다. 전기전도 보조제들은 용액의 전기전도도 뿐만 아니라 도금층의 외관 및 미세구조에도 많은 영향을 주는 것으로 알려져 있다. 따라서 본 연구에서는 황산나트륨, 황산암모늄의 농도를 변화시켜 표면외관, 한계전류밀도, 미세구조, 우선배향성 등을 조사하여 최적의 물성을 갖는 아연 도금층을 얻기 위한 조건을 도출하고자 하였다. 전기아연도금용 소재로는 두께 0.8mm이고 크기가 $100{\times}120mm$인 중저탄소강 (0.02% C)을 사용하였으며 전처리 과정으로 탈지와 산세를 행하고 현장 도금액을 사용하여 다음과 같은 조건 하에서 아연도금을 행하였고 극간전합을 측정하였다. 도금 후 표면의 미세구조는 SEM을 사용하여 관찰하였으며 표면외관 특성을 분석하기 위해 광택도계(Tri- Microgloss-60-85)를 이용하여 입사각 $60^{\circ}$ 에서 광택도를 측정하였고, 색차계(Color Quest II Hunter Lab.)를 사용하여 백색도를 각각 측정하였다. 또한 X선 회절기를 이용하여 도금층의 우선 배향성을 분석하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.7
• /
• pp.867-872
• /
• 2010

Unused energy derived from sources in nature can be captured and stored for future use, for example, to recharge a battery or power a device; this process of capturing and storing energy is called energy harvesting. Extensive investigations are being carried out in order to use piezoelectricity to harvest the energy generated by body movements or machine vibrations. This paper presents a simple analytical model that describes the output voltage effectiveness of a Piezocomposite Generating Element (PCGE) from vibration and its experimental verification. PCGE is composed of carbon/epoxy, PZT, and glass/epoxy layers. During the manufacturing process, the stacked layers were cured at $177^{\circ}C$ in an autoclave, which created residual stresses in PCGE and altered the piezoelectric properties of the PZT layer. In the experiments, three kinds of lay-up configurations of PCGE were considered to verify the proposed prediction model and to investigate its capability to convert oscillatory mechanical energy into electrical energy. The predicted performance results are in good agreement with observed experimental ones.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.259-263
• /
• 2001

There are several steps such as slicing, lapping, chemical etching and mechanical polishing in the silicon wafer production process. The chemical etching step is necessary to remove damaged layer caused In the slicing and lapping steps. The typical etching liquor is the acid mixture comprising nitric acid, acetic acid and hydrofluoric acid. At present, the waste acid is treated by a neutralization method with a high alkali cost and balky solid residue. A solvent extraction method is applicable to separate and recover each acid. Acetic acid is first separated from the waste liquor using 2-ethlyhexyl alcohols as an extractant. Then, nitric acid is recovered using TBP(Tri-butyl phosphate) as an extractant. Finally hydrofluoric acid is separated with the TBP solvent extraction. The expected recovered acids in this process are 2㏖/l acetic acid, 6㏖/1 nitric acid and 6㏖/l hydrofluoric acid. The yields of this process are almost 100% for acetic acid and nitric acid. On the other hand, it is important to recover and reuse the metal values contained in various industrial wastes in a viewpoint of environmental preservation. Most of industrial products are made through the processes to separate impurities in raw materials, solid and liquid wastes being necessarily discharged as industrial wastes. Chemical methods such as solvent extraction, ion exchange and membrane, and physical methods such as heavy media separation, magnetic separation and electrostatic separation are considered as the methods for separation and recovery of the metal values from the wastes. Some examples of the application of solvent extraction to the treatment of wastes such as Ni-Co alloy scrap, Sm-Co alloy scrap, fly ash and flue dust, and liquid wastes such as plating solution, the rinse solution, etching solution and pickling solution are introduced.

• Korean Journal of Microbiology
• /
• v.26 no.3
• /
• pp.223-229
• /
• 1988

Bacillus subtilis K-4-3, which produces considerable amount of $\beta$-glucanase was selected among extracellular $\beta$-glucanase-producing bacteria isolated from soil. $\beta$-glucanase was purified by ammonium sulfate fractionation, Sephadex G-100 gel filtration and DEAE-sephacel ion exchange chromatography. The purified enzyme revealed a single band by polyacrylamide gel electrophoresis and SDS-polyacrylamide gel electrophoresis. Its molecular weight was estimated to be 17000 dalton by SDS-polyacrylamide gel electrophoresis. The optimum pH and temperature of the purified $\beta$-glucanase were 7.0 and $50^{\circ}C$, respectively. The enzyme was strongly inhibited by 1.0mM of $Fe^{3+}$, and activated by 1.0mm of $Li^{}47+$. The absence of glucose after thin layer chromatography of reaction products revealed that the purified enzyme contains no cellobiase or laminarinbiase activity. The loberation of ki, tri-and tetra-saccharide as reaction products can be explained by endoaction of the enzyme.

• The Korean Journal of Ecology
• /
• v.21 no.5_3
• /
• pp.695-702
• /
• 1998

This study was carried out to investigate to determine seasonal variation of dehydrogenase activity, phosphatase activity, adenosine tri-phosphate content and some physicochemical properties, such as soil pH, moisture content, organic matter and several heavy metal concentrations from Apr. 1997 to jan. 1998 in Pinus densiflora and Quercus mongolica forest in Mt. Nam, to explain a relationship between enzyme activity and the soil factors. There were ranges of 4.03-4.65 in soil pH, 18.65-51.09% in moisture content and 6.69-95.95% in orgainc matter. The organic matter content decreased with soil horizon, showing the higher values in Q. mongolica forest. In comparison to the results of Kawngneung site as control area, there were slightly differences due to a development level of forest ecosystem and microbial degradation of organic matter. The heavy metal concentrations showed 32.50-75.55 ${\mu}g/g$ in Cu, 69.33-134.84 ${\mu}g/g$ in Zn, 57.02-150.32 ${\mu}g/g$ in Pb, and 0.36-1.00 ${\mu}g/g$ in Mt. Nam. These values are higher than in Kwangneung site because of long-term exposure to air pollutants from central city. On the other hand, ATP contents in Mt. Nam were lower than in Kawngneung site in relation to soil organic matter, moisture content and relatively high heavy metal concentrations. ATP contents per soil weight was largest in F+H layer and in spring time of other seasons. Dehydrogenase activity as an index of soil microbial activity had a ranges of 170.67-1,221.66 ${\mu}g$ TPF/g that showed lower values than in Kawngneung site. However, phophatase activity had a contray tendency due to P fertilization for a continuous management. Those values increased through spring to a maximum in the summer and fall in autumn. This is basically caused by metabolic state of soil on the biological activity and several and several factors, such as aeration, soil temperature, vegetation and microflora.

• Journal of Surface Science and Engineering
• /
• v.54 no.3
• /
• pp.119-123
• /
• 2021

SnO₂ single layer and SnO₂/Ag/SnO₂ (SAS) tri-layered films were deposited on the glass substrate by RF and DC magnetron sputtering at room temperature and then the effect of Ag interlayer on the opto-electrical performance of the films were considered. As deposited SnO₂ films show a visible transmittance of 85.5 % and a sheet resistance of 1.2×10⁴ Ω/□, the SAS films with a 15 nm thick Ag interlayer show a lower resistance of 18.8 Ω/□ and a visible transmittance of 70.6 %, respectively. The figure of merit based on the optical transmittance and sheet resistance revealed that the Ag interlayer in the SnO₂ films enhances the opto-electrical performance without substrate heating or annealing process.

• Journal of the Mineralogical Society of Korea
• /
• v.13 no.3
• /
• pp.121-137
• /
• 2000

Weathering profiles which were developed under a temperate, humid environment and relatively steep geography, show a thick saprolite and soil horiaon in the Precambrian granitic gneiss of the Yoogoo area. In the weathering profiles, secondary minerals such as interstratified biotite/vermiculite, tri- or di-octahedral vermiculite, halloysite, kaolinite, illite, smectite, gibsite and geothite were observed. Kaolinization of biotite is the most prevalent mechanism but vermiculitization is a minor from all ofweathering profiles. Biotite altered to B/V mixed layer-vermiculite, to illite and to halloysite, kaolinite and gibbsite. Halloysite is the most frequently observed weathering product of biotite in these profiles. Goethite is observed at the around or opened fissures of altered biotite. Tubular halloysite aggregates was fDrmed from dissolution-precipitation of plagioclase. The occurrence of halloysite aggregates is divided into a preferentially oriented type and a wrinkled one which were resulted from the dissolved type of plagioclase. Fe-bearing minerals have also been subjected to dissolution leaving the precipitation of geothite along dissolution voids. The profile of granitic gneiss is a typical weathering pattern showing a clay minerals increase toward the surface. Weathering of minerals were controlled by locally acidic and good-drainage environment, and formed a various and complicated secondary minerals in this study area.

• Korean Journal of Poultry Science
• /
• v.8 no.2
• /
• pp.55-68
• /
• 1981

Calcium and phosphorus are not only indispensable for the bone formation and body fluids equilibrium but also are major components of egg shell. It is nutritionally important, therefore, to investigate the metabolism of calcium and phosphorus and to search for optimum requirement of calcium and phosphorus and the availability of various sources of calcium an4 phosphorus by poultry. An attempt was made to review the nutrition of calcium and phosphorus in poultry diets. 1, Calcium and phosphorus have great interrelationship with vitamin D in their metabolisms. 2. Most of the plant-origin phosphorus are existing in phytic form and it leads to low availability when used in poultry rations, although calcium and phosphorus present in animal-origin or mineral supplements are highly available in general. 3. Calcium and phosphorus requirement from existing information indicated that 1.0% calcium and 0.7% phosphorus for broiler and egg-type chicks, and 3.5% calcium and 0.4% phosphorus for laying hen. 4. It has been recommended that calcium and phosphorus level should be increased when the feed intake was decreased or when the egg Production rate was higher or when the hens are old. 5. Mono-, ci-, tri-, calcium phosphate, calcium carbonate, bone meal, limestone and oyster shell u the most readily available among various sources of calcium phosphorus supplements. Soft rock phosphate, deflourinated phosphate and gypsum are somewhat inferior to the previous ones in bioavailability. 6. The effect of particle size of calcium supplements on egg shell quality and egg production rate is not yet clearly defined but recent works showed that oyster shell is more available when it was coarse and limestone is more available when it was fine in panicle. size. 7. Present data indicated that mixed feeding of oyster shell and limestone is superior to the single feeding of each on laying performance. 8. Significant interaction between phosphorus and sodium was observed, that is, excessive sodium decreased egg production in layer and body weight growth in broiler in the low phosphorus diets but increased them in the high phosphorus diets.