• International Journal of High-Rise Buildings
• /
• v.3 no.4
• /
• pp.297-304
• /
• 2014

Recently, there have been some reported examples of structural collapse due to gravity, subsequent to damage from accident or an excitation that was not prepared for in the design process. A close view of new concepts, such as a redundancy and key elements, has been taken with the aim of ensuring the robustness of a structure, even in the event of an unexpected disturbance. The author previously proposed a sensitivity index of the vertical load carrying capacity to member disappearance for framed structures. The index is defined as the ratio of the load carrying capacity after a member or a set of an adjacent member disappears, to the original load carrying capacity. The member with the highest index may be regarded as a key element. The concept of bio-mimicry is being applied to various fields of engineering, and tree-shaped structures are sometimes used for the design of building structures. In this study a sensitivity analysis is applied to the irregular-framed structures such as tree-shaped structures.

• International Journal of Computer Science & Network Security
• /
• v.21 no.1
• /
• pp.119-124
• /
• 2021

Elastic Optical Networks (EONs) allow to solve the high demand for bandwidth due to the increase in the number of internet users and the explosion of multicast applications. To support multicast applications, network operator computes a tree-shaped path, which is a set of optical channels. Generally, the demand for bandwidth on an optical channel is enormous so that, if there is a single fiber failure, it could cause a serious interruption in data transmission and a huge loss of data. To avoid serious interruption in data transmission, the tree-shaped path of a multicast connection may be protected. Several works have been proposed methods to do this. But these works may cause the duplication of some resources after recovery due to a link failure. Therefore, this duplication can lead to inefficient use of network resources. Our work consists to propose a method of protection that eliminates the link that causes duplication so that, the final backup path structure after link failure is a tree. Evaluations and analyses have shown that our method uses less backup resources than methods for protection of a multicast connection.

• Journal of Forest and Environmental Science
• /
• v.31 no.3
• /
• pp.192-201
• /
• 2015

Information on plant diversity and community structure are required to chalk out necessary actions for conservation management. The present study assessed the composition and diversity of tree species in Kamalachari Natural Forest of Chittagong South Forest Division, Bangladesh, during April 2010 to November 2011. A total of 107 tree species belonging to 72 genera and 37 families were recorded, where Moraceae family was represented by maximum (11) species. Density, Basal area and volume of tree species were $418{\pm}20.09stem/ha$, $21.10{\pm}2.62m^2/ha$ and $417.4{\pm}79.8m^3/ha$ respectively. Diameter and height class distribution of tree species revealed an almost reverse J-shaped curve. Both the number of species and percentage of tree individuals were maximum in the lower DBH and height ranges. Anthropogenic disturbances like illegal tree cutting, over extraction, settlement inside forest area etc. were noticed during the study, which are supposed to cause gradual decrease of both tree species and individuals in the higher DBH and height classes. However, Artocarpus chama was found dominant showing maximum IVI followed by Schima wallichii, Aporosa wallichii, and Lithocarpus acuminata. The quantitative structure of the tree species of Kamalachari natural forest is comparable to other tree species rich tropical natural forests. The findings of the study may help in monitoring future plant population changes of the identified species and adopting species specific conservation programs in Kamalachari natural forest.

• The Korean Journal of Ecology
• /
• v.16 no.1
• /
• pp.75-91
• /
• 1993

Structure and dynamics of Abies koreana community in Mt. Gaya were studied to provide the basic data for conservation of Abies koreana community, an endemic species in Korea. A. koreana community of this study site was composed of tree layer (4~7m), subtree layer (2~4m), shrub layer (1~2m), and herb layer (below 1m). The heights of tree and subtree layers were low. Floristic composition showed that this study site was subalpine and dry site. In frequency distribution diagram of diameter classes of major species consisting of A. koreana community, those of both A. koreana and other species showed reverse J-shaped types. From these results, it was estimated that A. koreana community of this site might be maintained continuously as a stable climax state like present state. In the spatal distribution diagram of major species, saplings of A. koreana were established under the canopy of A. koreana and Pinus koraiensis and under the dead tree of A. koreana. From these results, it was known that A. koreana saplings were recruited before the community was disturbed and regeneration was accomplished by advance regeneration pattern, in which these saplings established before occurrence of disturbance fill with open site originated from death of mature tree. Growth of annual rings was variable among individuals, it was estimated that such variation was originated in that growth of each individual relates to microclimatic conditions rather than macroclimatic ones. Ecological longevity of A. koreana in this study site estimated by disturbance types and age of dead trees was about 120 years.

• Journal of Forest and Environmental Science
• /
• v.31 no.3
• /
• pp.164-176
• /
• 2015

Cyathea gigantea is a tree fern distributed throughout humid tropical regions of northeast India and other parts of the country. However, wild populations of this species are largely affected by various natural and anthropogenic activities. Therefore, an attempt was made to study the population structure and regeneration status of C. gigantea in and around greater Itanagar area of Papum Pare district, Arunachal Pradesh. Altogether 45 patches, ranging from 19.63 to $260m^2$ of area, were randomly sampled to study population structure and regeneration status of the species. Population study showed highest number of youngs in the height class of 0.50-0.75 m while, immatures were recorded highest in the height class of 2.0 to 2.5 m. Majority of the matures belonged to 6-9 m height class while it was recorded maximum in the diameter class of 10-15 cm. Average density of C. gigantea was $0.07individuals\;ha^{-1}$ which varied greatly among different patches with a range of 2 to 14. Significant correlations were found between patch size and density of youngs, immatures, matures and total density. Maximum concentration of youngs was observed in patch size $60-140m^2$, while for immatures, it was highest in patch size $20-160m^2$. Similarly, highest concentration of matures was observed in patch size $20-80m^2$ and $80-180m^2$. Population structure of the total population exhibited inverted pyramid shaped distribution. Population structure consisting of youngs, immatures, matures showed that around 60% patches lack of regenerating individuals which depict very poor natural regeneration of the species. Effective conservation strategies are therefore to be formulated to save C. gigantea from the threat of extinction in near future.

• Journal of Ecology and Environment
• /
• v.44 no.3
• /
• pp.196-206
• /
• 2020

Background: The Himalayan forests are of great importance to sustain the nature and community resource demands. These forests are facing pressures both from anthropogenic activities and ongoing global climatic changes. Poor natural regeneration has been considered a major problem in mountainous forests. To understand the population structure and regeneration status of Larix (Larix griffithiana and Larix himalaica), we conducted systematic vegetation surveys in three high-altitude valleys namely Ghunsa (Kanchenjunga Conservation Area, KCA), Langtang (Langtang National Park, LNP), and Tsum (Manaslu Conservation Area, MCA) in Nepal Himalaya. The average values of diameter at breast height (DBH), height, and sapling height were compared for three sites and two species using Kruskal-Wallis test. Population structure was assessed in terms of proportion of seedlings, saplings, and trees. Regeneration was analyzed using graphical representation of frequencies of seedlings, saplings, and trees in histograms. Results: The results showed that the population structure of Larix in terms of the proportion of seedling, sapling, and tree varied greatly in the three study areas. KCA had the highest record of seedling, sapling, and tree compared to other two sites. Seedlings were the least among three forms and many plots were without seedlings. We found no seedling in MCA study plots. The plot level average DBH variation among sites was significant (Kruskal-Wallis χ² = 7.813, df = 2, p = 0.02) as was between species (Kruskal-Wallis χ² = 5.9829, df = 1, p = 0.014). Similarly, the variation in average tree height was significant (Kruskal-Wallis χ² = 134.23, df = 2, p < 0.001) among sites as well as between species (Kruskal-Wallis χ² = 128.01, df = 1, p < 0.001). All the sites showed reverse J-shaped curve but more pronounced for KCA and MCA. In comparing the two species, Larix griffithiana has clear reverse J-shaped diameter distribution but not Larix himalaica. Conclusion: The varied responses of Larix manifested through regeneration status from spatially distinct areas show that regeneration limitations might be more pronounced in the future. In all the three studied valleys, regeneration of Larix is found to be problematic and specifically for Larix griffithiana in MCA and Larix himalaica in LNP. To address the issues of disturbances, especially serious in LNP, management interventions are recommended to sustain the unique Himalayan endemic conifer.

• Korean Journal of Plant Resources
• /
• v.17 no.3
• /
• pp.248-256
• /
• 2004

Dendropanax morbifera Lev.(Araliaceae), Korean endemic and evergreen small tree is a component of evergreen forest and mainly distributed in sourthern region and islands in Korea. The ecological characteristics of 4 natural stands of D. morbifera.(Sundol, Suak, Hannam, and Sangho populations in Cheju island) were studied. In most of the D. morbifera natural stands, the following tree species appeared predominantly: Castanopsis cuspidata var. sieboldii, Carpinus laxiflora, D. morbifera, Quercus glauca, Quercus myrsinaefolia, Camellia japonica, and Acer pseudo-sieboldianum. Two tree species, such as C. cuspidata var. sieboldii and C. laxiflora appeared in the all investigated stands. D. morbifera occupied 17.2% of the upper story, 12.9% of the middle story, and 10.3% of the lower story, respectively. The distribution patterns by Morisita' s Index showed that D. morbifera was distributed randomly in the three stories. The frequency distribution of DBH D. morbifera species showed reverse J-shaped, therefore it seems to remain as a dominant species.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.9
• /
• pp.2089-2104
• /
• 1995

A novel and efficient cutter path planning method for machining intricately shaped curved surfaces, called the steepest directed tree method, is presented. The curved surface is defined by triangular facets, the density and structure of which are determined by the intricacy and form accuracy of the surface. Geometrical form definition and recognition of the topological features are used to connect the nodes of the triangulated surface meshes for the successive and interconnected steepest pathways, which makes good use of end milling characteristics. The planetary cutter centers are determined to locate along smoothly changing paths and then the height values of the cutter are adjusted to avoid surface interference. Several machined examples of intersecting and intricate surfaces are presented to illustrate the benefits of the new approach. It is shown that due to more consistent geometry matching between cutter and surface(in comparison with the current CC Cartesian method) surface finish can be typically improved. Moreover, the material in concave fillets which is difficult to be removed by ball mills can be removed efficiently. The built-in positioning of cutter to avoid interference runs minutely in the sharp and discontinuous regions. The steepest upward movement of the cutter gives a stable dynamic cutting state and allows increase in the feedrate and spindle speed while remaining the stable cutting state.

• Journal of Ecology and Environment
• /
• v.33 no.1
• /
• pp.67-77
• /
• 2010

Stand structure and spatial associations of the dominant tree species in Quercus mongolica stands were investigated to understand interspecific relationships and the persistent dominance of Q. mongolica. We examined the species composition, DBH (diameter at breast height) distribution, and spatial distribution of trees (${\geq}\;2.5\;cm$ DBH) in two permanent $100\;m\;{\times}\;100\;m$ plots in Q. mongolica-dominant stands on the western part of Mt. Jiri. Ripley's K-function was used to characterize the spatial patterns and associations of dominant tree species. Q. mongolica showed a continuous and reverse-J shaped DBH distribution with clumped spatial distribution in both study sites. Q. mongolica and Abies koreana exhibited a negative association implying potential interspecific competition. The positive spatial association between Q. mongolica and Alnus hirsuta var. sibirica and Fraxinus sieboldiana were affected by site characteristics: limited habitat conditions with a large proportion of rock surface. Our results suggest that interactions among species were complex and ranged from positive to negative. Differences in stand and site characteristics and regeneration mechanisms among the species play an important role in regulating their spatial distribution patterns, while competition between individuals also contributes to spatial patterning of these communities. The high density and the early developmental stage of spatial distribution and structural characteristics of Q. mongolica and the relatively low importance values of other species in the stands imply that Q. mongolica will remain dominant in the study sites in the near future.

• The Korean Journal of Ecology
• /
• v.24 no.6
• /
• pp.341-348
• /
• 2001

Population dynamics of the oldest relic stand of Pinus densiflora for. erecta which remains as a status of patch in Sokwang-Ri area, Uljin-Gun, was studied to provide the basic data for conservation of the oldest pine stand in Korea. The upper slope site and ridge site including total 12 plots mainly represented Pinus densiflora for. erecta and Quercus mongolica. These two tree species showed reverse J-shaped distribution. From this information, it was concluded that intensive interspecific competition between two species could be occurring. Age distribution of P. densiflora for. erecta on the sites above middle slope area was indicated bi-modal type or tri-modal type which was known as an age structure of climax forest. Therefore, it was estimated that Pinus densiflora for. erecta population could be continuously maintained in the each patch above middle slope area. In the valley sites, hardwood species such as Q. mongolica, Q. variabilis, Styrax obassia and Acer pseudosieboldianum occupied most part of the under crown-cover area and their seedlings and saplings were developing into the closed upper layer crown because the height of upper layer crown reached about 35 meters and such a high crown height was more suitable for light utilization by plants of under layer. The growth patterns were mainly fluctuated for the entire life time of the oldest tree caused by frequent disturbance. And the initial growth curves of the mature trees and suppressed juvenile trees showed different tendencies along the sites.