• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.06a
• /
• pp.215-218
• /
• 1998

XLPE/VLDPE (Crosslinked polyethylene/very low density polyethylene) blends were prepared by a twin screw extruder and their electrical properties such as water tree and breakdown characteristic were measured. it was found that both water tree and breakdown characteristics of XLPE were improved by the addition of VLDPE to polyethylene. It was also found that the extent of improvement of electrical properties by the addition of VLDPE to polyethylene depends on the type and concentration of VLDPE.

• Journal of the Korean Society of Safety
• /
• v.14 no.1
• /
• pp.216-221
• /
• 1999

The correlation between propagation of electrical tree and internal partial discharges is discussed. We use specimens with needle-plane electrode system made of LDPE(Low Density Polyethylene), observed inception and propagation of electrical tree by optical microscope and investigated the characteristics of the partial discharge (PD) pulses accompanying with propagation of electrical tree. In the specimens with needle-shaped void, the tree propagates branch type. The length of the tree has good linear relation with average discharge power of PD pulses. In the specimens without needle-shaped void, the tree grows bush type tree. The correlation between the area of the tree and the average discharge power of PD pulses has linear relation.

• Journal of Korean Society of Transportation
• /
• v.28 no.6
• /
• pp.43-54
• /
• 2010

In recent years there have been studies on tour based approaches for freight travel demand modelling. The purpose of this paper is to analyze tour type choice behavior of commercial vehicles which are divided into round trips and chained tours. The methods of the study are based on the decision tree and the logit model. The results indicates that the explanation variables for classifying tour types of commercial vehicles are loading factor, average goods quantity, and total goods quantity. The results of the decision tree method are similar to those of logit model. In addition, the explanation variables for tour type classification of small trucks are not different from those for medium trucks', implying that the most important factor on the vehicle tour planning is how to load goods such as shipment size and total quantity.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.20 no.2
• /
• pp.75-80
• /
• 2006

In this paper, to detect and observation the void discharges pulse signal, AE signals and tree growth characteristics in case the high voltage is applied to a XLPE sample for a power cable. We also examined the partial discharge current pulse and AE signals with the increase of the applied voltage in XLPE insulation. The experimental results show that a branch-type tree grows in the presence of the voids, and a bush-type tree grows in the absence of the voids in both samples. A rate of tree growth increases abruptly in proportional to the deterioration time in the presence of the of the voids, but in the absence of the voids, a rate of tree growth decreases as time goes by and finally a breakdown occurs. The frequency band of AE signals that are generated from the partial discharges in a XLPE sample, one of solid dielectric materials, is about 1.0[MHz].

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.5
• /
• pp.213-221
• /
• 2002

In order to improve the reliability of XLPE cables, it is necessary to find the useful diagnostic parameter according to long term aging. This paper described the change of partial discharge(PD) phase Properties of XLPE cable insulation with branch type electrical tree degradation. for long term aging. To understand the PD Properties with $\phi$ -q-n distributed shape of XLPE insulation, specimens were prepared by 22.9㎸ distribution cable and made in a type of block(16${\times}$16${\times}$3[mm]). Ogura needles having tip radius of l0${\mu}{\textrm}{m}$ were inserted into each block pieces. The measuring system was consisted of PD detector, digitizer for digital conversion, VXI system for signal processing. The PD properties of the specimens were measured from initiation of tree to breakdown and their characteristics were analyzed. We analyzed the relationship between electrical properties(PD Quantity, PD initiation angle, PD extinction angle, PD occurrence angle : (PD extinction angle - PD initiation angle)) and the normalized aging rate. We found PD parameter, PD initiation angle and occurrence angle, which are a useful diagnostic parameter in estimating the branch type electrical tree for XLPE insulation condition.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.29 no.1
• /
• pp.152-160
• /
• 2001

This study is conducted to evaluate the effects of containerized landscape tree production methods on post-transplant stress. Two types of container such as plastic pot(pot), fabric growing bag(bag) were adopted to restrict tree roots. Each types of containers was divided into seven sub-types. One traditional production method was included as comparison. Two landscape woody plants species (Magnolia denudata, Albizzia julibrissin) were implanted in the 7 sub-types of container. After one or two growing season in the container, each types of container trees was transplanted. Half of the trees were transplanted in the mild spring season, and another half of trees were transplanted in the improper summer season. The data were collected on the crown wilting ratio and trunk die-back ratio. The result of the analysis based on these data were as follows; 1) The container production methods were lower than the traditional production methods by 3 times in the average wilting ratio of summer season's transplanting point. 2) Post-transplant stress was more successfully mitigated, in case the "pot" type as was the "bag" types of container. 3) The effective and economic way of mitigating post-transplant stress by container production methods was selecting container plants of vigorous and deep root systems. 4) The "pot" type of container was to restrict tree roots more successfully, But, winter chilling and low temperature attacked the "pot" type tree's twigs and suckers. These results indicated that "pot" grown container plants should managed carefully during the winter after transplanting. Based upon the results of this study, a subsequent research on the development of container material, growth type of the container trees, and other maintaining method will be required.es, and other maintaining method will be required.

• Steel and Composite Structures
• /
• v.15 no.5
• /
• pp.507-518
• /
• 2013

The seismic performance of six types of weak-axis steel moment connections was investigated through cyclic testing of six full-scale specimens. These weak-axis moment connections were the column-tree type, WUF-B type, FF-W type, WFP type, BFP-B type and DST type weak-axis connections. The testing results showed that each of these weak-axis connection types achieved excellent seismic performance, except the WFP and the WUF-B types. The WFP and WUF-B connections displayed poor seismic performance because a fracture appeared prematurely at the weld joint due to stress concentrations. The column-tree type connection showed the best seismic behavior such that the story drift ratio could reach 5%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.13 no.12
• /
• pp.1063-1068
• /
• 2000

Water treeing in underground distribution power cable is not easy to observe by nondestructive method and it has very complex patterns. This study describes the principles and practices of a continuous observation of initiation and growth of tree in polymeric insulation material using an image measurement technique. Using this technique we could observe water tree and the growing process of electrical tree due to the water tree and the growing process of electrical tree due to the water tree. All of these growing process is analyzed quantitatively by image measurement program composed of borland c++. We fabricated the thin film type specimen to observe water tree easier and also the needle electrode was prepared by etching method using electrolytes. Initiation and the growth of three was observed somewhat different depending on the applied voltage and the water electrode. AgNO$_3$solution electrode accelerates the initiation and the growth of water tree, compared to those of distilled water electrode. The water and the electrical tree occurred by water tree has discontinuous growth characteristic.

• Journal of Environmental Science International
• /
• v.25 no.1
• /
• pp.57-65
• /
• 2016

This study's purpose was to provide basic data for the monitoring of ecological changes caused by change of vegetation structure of Abies koreana forest in a study site susceptible to climatic change in Yeongsil area of Hallasan Mountain, Jeju Island. Surveys revealed this: in Yeongsil area of Hallasan Mountain, per 1 ha of A. koreana forests, total number 1,781, and A. koreana number 989, accounting for 55.5% of the total number of trees. 190 A. koreana or 19.2% were found to be dead. For the number of individual trees by DBH, trees standing 5 cm - 10 cm tall formed the largest portion at 39.9%, and in the case of other trees except A. koreana, the number of individual trees below 5 cm accounted for 23.5% of the total number of trees. The survey of importance by height revealed this: at the top level, the importance of A. koreana was the highest at 106.23, but the sum of importance of temperate deciduous broad-leaved trees (Prunus maximowiczii, Quercus mongolica, and Taxus cuspidata) was higher at 142.84 than that of A. koreana. The analysis of species diversity revealed 0.645 species diversity for the tree layer and 0.817 for the shrub layer; for evenness, 0.549 for the tree layer and 0.664 for the shrub layer; for dominance value; 0.451 for the tree layer and 0.336 for the shrub layer. The analysis of tree vitality revealed that for the A. koreana forests in Yeongsil, the composition ratio of A. koreana by type is AS type>AL type>DS type>DB type, and that of the other trees is AL type>AS type>AF type>AB type. Compared with the forests in other areas, the A. koreana forests in the Yeongsil area have a very high occurrence rate of dead trees, and a high importance of trees is shown in the deciduous broad-leaved tree forests. Compared with the A. koreana forests in the Jindallaebat area, with the same level above sea, the vegetation structures are fast changing. Also, due to dryness and other non-physical environmental changes caused by a lack of rainwater and dry winds in winter, dead trees are fast increasing in number. Environmental changes such as climate change diversely affect the maintenance of A. koreana in individual areas, and if environmental changes are fast and continue long, of the A. koreana forest areas in the Hallasan Mountain, the A. koreana forests in the Yeongsil area will decrease fastest in number and will experience changes in the vegetation structure. Thus, it is necessary to survey the vegetation changes in A. koreana forests, which are distributed in all directions but are centered on Hallasan Mountain, and to thus conduct long-term monitoring and research.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.407-410
• /
• 2005

We used a series of Landsat images acquired from 1984 to 2001 to observe decadal changes of the research forest of Kangwon National University. Tree NDVI images of November in 1984, 1986 and 2001 were displayed in RGB color composite. This image enabled us to identify historical change of conifer types and their approximate ages. Conifers were classified into 'old conifer aged more than 25 years', 'young conifer aged 20-25 years' 'very young conifer aged less than 20 years', and recently deforested areas. The results coincide with in situ data very well. Archives of higher resolution images should be used to monitor the change of area for various tree types.