• Journal of the Korean Electrochemical Society
• /
• v.3 no.4
• /
• pp.196-199
• /
• 2000

Electroless plating is the desirable surface treatment method which is being widely used to all kinds of material such as requiring corrosion resistance, wear resistance and conductivity, especially plating of nonconductive material. Electroless nickel deposit has particular characteristics including non-magnetic property, amorphous structure, wear resistance, corrosion protection and thermal stability. In this study, electroless nickel plating was studied with an change in hardness and corrosion resistance of electroless nickel-phosphorus deposit depending on heat treatment. The highest hardness value was obtained by heat treatment at $500^{\circ}C$ Corrosion resistance of deposit, which had been heated at $300^{\circ}C$, was excellent when it was immersed in 1M $H_2SO_4$ solution for 60 hrs.

• International Journal of Highway Engineering
• /
• v.16 no.2
• /
• pp.35-41
• /
• 2014

PURPOSES : Surface treatment is a favorable method in the pavement preventive maintenance. This study (Part I) aimed to develop the low viscosity filling material for waterproof characteristics and high penetrable and weather resistance, and a series of companion study (Part II) presents the coating characteristics and performance analysis using field and lab tests. METHODS : Hydrophobic characteristics of the advanced surface treatment material are observed and measured the filling depth and the permeability for sand and asphalt pavement specimen using the water absorption test and permeability test, X-RAY CT test. Color difference for the weather resistance using ultraviolet ray accelerated weathering test is compared with asphalt pavement specimens. RESULTS : The developed material shows the decreased water absorption and increased impermeable effect because of the hydrophobic characteristics. It is found that the filling depth is about 6mm and weather resistance is better than asphalt pavement specimen. CONCLUSIONS : The advanced hydrophobic - low viscosity filling treatment material is developed in this study (Part I) to improve the waterproof characteristics and high filling capacity and weather resistance for the pavement preventive maintenance.

• Journal of Korean Physical Therapy Science
• /
• v.19 no.2
• /
• pp.35-42
• /
• 2012

Background : This study was conducted to know the effect of resistance exercise using thera-band in parallel with conservative therapy in patients with frozen shoulder. Methods : We analyze subjective pain scale, ROM and shoulder functional scale 24 patients diagnosed with adhesive capsulitis were included for study. Among them, 12 patients(experiment group) were managed by resistance exercise as well as conservative physical therapy, another 12 patients(control group) were only treated by conservative therapy alone. All the patients were treated three times a week for 4 weeks, and after, and after each treatment subjective pain scale, ROM, shoulder functional score(SFI) were measured. Results : The VAS were significant reduced between experimental group and control group according to pre-treatment and post-treatment. In experimental group, the ROM and SFI has increased than control group according to pre-treatment and post-treatment. Conclusion : According to the results, we concluded that both conservative therapy and self resistance exercise using thera-band technique are more effective for increasing ROM especially flexion, abduction, internal rotation and SFI than conservative therapy alone.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.3
• /
• pp.905-907
• /
• 2014

The plasma and microwave surface treatments of carbon nanotubes that loaded on plastic substrates were carried out with expecting a change of carbon nanotube dispersion by increasing treatment time. The microwave treatment process was undergone by commercial microwave oven (800 W). The electrical property was measured by hall measurement and resistance was increased by increasing $O_2$ flow rate of plasma, suggesting an improvement of carbon nanotube dispersion and a possibility of controlling the resistances of carbon nanotubes by plasma surface treatment. The resistance was increased in both polyethylene terephthalate and polyimide substrates by increasing $O_2$ flow rate. Resistance changes only slightly with different $O_2$ flow treatment in measure rho for all polyimide samples. Sheet resistance is lowest in polyimide substrate not due to high carbon nanotube loading but due to tendency to remain in elongated structure. $O_2$ or $N_2$ plasma treatments on both polyethylene terephthalate and polyimide substrates lead to increase in sheet resistance.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.2
• /
• pp.162-168
• /
• 2011

In this research, nitrogen plasma source ion implantation(PSII) of non-coated tungsten carbide endmill tools was conducted with low heat treatment for increasing wear resistance. After the low heat treatment of PSIIed tools to give a homogeneity of wear resistance, the surface modification of tools was analyzed by hardness test, surface roughness and cutting forces. As for the resultant cutting forces, low heat treatment in temperature of $400^{\circ}C$ and $500^{\circ}C$ is stable because of low cutting resistance. The 20-minutes heat treated tool at spindle speed 25000rpm has superiority of surface roughness, Ra of $0.420{\mu}m$ and was found to have good wear resistance. The higher hardness value was obtained by increasing temperature from $300^{\circ}C$ to $600^{\circ}C$ for PSIIed tools with low heat treatment. As the PSIIed tools under 10minutes at temperature of $600^{\circ}C$ have the highest hardness as Hv of 2349.8, It was analyzed that temperature processing give much influences on hardness.

• Journal of the Korean Society for Heat Treatment
• /
• v.16 no.3
• /
• pp.134-140
• /
• 2003

Effects of cryogenic treatment and tempering temperature on the amount of retained austenite, hardness and wear properties has been investigated using alloy tool steel, STD 11. Cryogenic treatments were performed at the temperatures of $-100^{\circ}C$, $-150^{\circ}C$ and $-196^{\circ}C$, and tempering were performed at $200^{\circ}C$ and $530^{\circ}C$. It was shown that lower hardness value was obtained on high temperature ($530^{\circ}C$) tempering even after cryogenic treatment. And retained austenite was not entirely transformed to martensite after cryogenic treatment even at $-196^{\circ}C$, which was not consistent with the belief that $-80^{\circ}C$ was sufficient to entirely transform any austenite retained in the quenched microstructure. Austenite retained in cryogenic treated condition was completely transformed to martensite only after tempering at $530^{\circ}C$. As far as wear test conditions in this investigation, it was found that cryogenic treatments improved the sliding wear resistance, but improvement of wear resistance was not directly related with retained austenite contents. And it was found that predominent wear mechanisms of STD 11 steel were oxidation wear and adhesive wear In sliding wear conditions.

• Journal of the Semiconductor & Display Technology
• /
• v.10 no.4
• /
• pp.43-46
• /
• 2011

In this study, we investigated the effects of the post Ar plasma treatment at different RF powers for various durations on electrical, structural, and optical properties of relatively thin Al-doped zinc oxide films. The sheet resistance was observed to decrease rapidly for the first 5min, beyond which the resistance apparently saturated. As the RF power increased, the grain size and the interplanar distance of (002) planes also increased. The observed decrease in sheet resistance was stated to be a consequence of Al and/or Zn interstitials as well as grain growth. It was also found that Ar plasma treatment increased the transmittance of Al-doped zinc oxide films in most of the visible light range below the blue light.

• Korean Journal of Schizophrenia Research
• /
• v.23 no.2
• /
• pp.51-57
• /
• 2020

Treatment-resistant schizophrenia (TRS) has been defined as the persistence of positive symptoms despite two or more trials of antipsychotic medication of adequate dose and duration. TRS is a serious clinical problem and occurs in approximately 30% of patients with schizophrenia. It is important that patients who do not adequately respond to antipsychotics be reevaluated to exclude or address causes other than non-responsiveness to medication, that is, the possibility of pseudo-resistance. In particular, non-adherence to oral antipsychotic treatment should be monitored to rule out pseudo-resistant cases of TRS. Moreover, patients with TRS who take their medication as required may have subtherapeutic antipsychotic plasma levels, secondary to pharmacokinetic factors. In this paper, we review the concept and exclusion of pseudo-resistance, especially owing to non-adherence or pharmacokinetic factors, and present methods to enhance drug adherence.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.5
• /
• pp.298-306
• /
• 2009

Gas nitriding and post oxidation were performed on stainless steels and SACM 645 steel. With increasing gas nitriding time, the increasing rate of nitrided layer was most rapid on SACM 645 steel and the nitriding depth of nitrided layer was most narrow on STS 304 steel among three steels. Corrosion resistance was increased with post oxidation on stainless steels and with increasing time the effect of corrosion resistance was decreased to compare with relatively short gas nitriding time. An improvement effect of corrosion resistance was consisted of predominantly on austenitic stainless steel by post oxidation after gas nitriding among three steels and it was relatively less influenced on martensitic stainless steel.

• Clinical and Experimental Reproductive Medicine
• /
• v.32 no.4
• /
• pp.347-352
• /
• 2005

Objective: The purpose of this study was to evaluate and compare the effects of metformin and rosiglitazone in overweight or obese women with polycystic ovarian syndrome. Methods: Twenty Six overweight or obese patients with polycystic ovarian syndrome were randomly treated with either metformin (500 mg three times daily, n=13) or rosiglitazone (4 mg once daily, n=13) for 6 months. Hormonal studies were performed before and after treatment. Insulin resistances were calculated by computerized HOMA 2 Calculator v2.2. Results: Testosterone decreased while SHBG increased after 6 months treatment in both metformin and rosiglitazone treatment groups. Fasting glucose decreased after metformin or rosiglitazone treatment. HOMA insulin resistance improved after treatment with either drug. There was no differences in hormonal changes and insulin resistance between 2 treatment groups. Conclusions: This study shows that metformin and rosiglitazone are effective in improving insulin sensitivity and ameliorating hyperandrogenism in overweight/obese polycystic ovarian syndrome women.