• Reproductive and Developmental Biology
• /
• v.37 no.3
• /
• pp.97-102
• /
• 2013

The objective of this study was to develop of semen transport system for cryopreservation and fertility in bull sperm. The ejaculated semen were diluted with Triladyl containing 20% egg-yolk for transportation. Diluted semen was transported by three methods that there were wrapping tissue (Tissue), sinking under $30^{\circ}C$ water (Water) and sinking between warm water and air (Air) methods. Semen was transported within 2 hours in $0.3^{\circ}C$. For this study, the freezing of diluted semen were added with Triladyl containing 20% egg-yolk. And frozen-thawed sperm were estimated with SYBR14/PI double stain for viability, FITC-PNA/PI double stain for acrosome reaction analysis and Rhodamine123 double stain for mitochondrial intact assessment. In results, live sperm (SYBR+/PI-) in Air treatment group ($43.3{\pm}4.7%$) was significantly (p<0.05) higher than other treatment groups (Tissue: $16.3{\pm}2.7%$ and Water: $27.5{\pm}3.1%$), dying sperm (SYBR+/PI+) in Air treatment group ($55.6{\pm}4.7%$) was significantly lower than other treatment groups (Tissue: $77.6{\pm}3.2%$ and Water: $67.6{\pm}3.3%$) (p<0.05). Acrosome reaction in Air treatment group ($0.2{\pm}0.1%$) within live sperm (PI negative region) was significantly (p<0.05) lower than other treatment groups (Tissue: $0.7{\pm}0.2%$ and Water: $0.5{\pm}0.1%$), the acrosome reaction in Air treatment group ($28.6{\pm}2.8%$) within all sperm also was significantly lower than other treatment groups (Tissue: $44.2{\pm}1.8%$ and Water: $36.2{\pm}2.0%$) (p<0.05). And mitochondrial intact in Air treatment group within live ($97.1{\pm}0.4%$) and all ($61.9{\pm}3.3%$) sperm were significantly higher than other treatment groups (Tissue: $85.2{\pm}3.3%$, Water: $87.8{\pm}2.9%$ within live sperm and Tissue: $49.28{\pm}3.7%$, Water: $42.0{\pm}3.1%$ within all sperm) (p<0.05). Therefore, we suggest that transportation by sinking method between warm water and air was beneficial to improvement of fertility in frozen-thawed in bull semen.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.3
• /
• pp.107-116
• /
• 2020

Four air hardening steels with carbon, silicon, manganese, chromium, and molybdenum variations have been used in this study to find out the optimal chemical compositions of steels with over 1200 MPa tensile strength for automotive subframe. The dimensional changes after heat treatment were determined for two automotive parts with open and closed cross sections using 3D scanner. When four steels were austenitized at 900℃ for 30 seconds, cooled at 3℃/s, reheated to 450℃ for 10 seconds followed by air cooling to simulate hot-dip galvanizing treatment showed ultra high tensile strength over 1200 MPa. Rear floor cross member with open cross section revealed much bigger dimensional changes than subframe with closed cross section after heat treatment at 900℃ for 20 minutes followed by air cooling.

• Journal of Environmental Science International
• /
• v.27 no.4
• /
• pp.251-259
• /
• 2018

This study was conducted to determine the effects of combination of air temperature and soil water content on the growth, physiological disorder rate, and yield of hot peppers. The study was carried out in a typical plastic house (open on one side and with ventilation fans on the other side), which was maintained with gradient air temperature (maximum difference in air temperature: $6^{\circ}C$). The deficit irrigation (DI) treatment commenced 65 days after transplanting. The height of plant and fresh and dry weights of the stem increased at high air temperature (ambient + $6^{\circ}C$, extreme high temperature; EHT). Furthermore, the leaf area decreased significantly with the DI treatment. There were no significant differences in the stem diameter, number of branches, and fresh and dry weights of the leaves among all the treatments. The net photosynthesis rate of the full irrigation (FI) treatment was higher than that of the DI treatment. The photosynthesis rate at ambient air temperature was $19.7{\mu}mol\;CO_2m^{-2}{\cdot}s^{-1}$, the highest among all the treatments; however, the photosynthesis rate of the EHT treatment decreased by 60% ($12.3{\mu}mol\;CO_2m^{-2}{\cdot}s^{-1}$). Additionally, the formation of guard cells in the leaf was abnormal with the EHT treatment, and there was a decrease in translocation efficiency. The effects of air temperature treatment were more pronounced on the physiological disorder rate and yield. The physiological disorder rate of the EHT treatment was the highest under the DI treatment condition. The yield of the AFI (ambient air temperature with full irrigation) treatment was 3,771 kg/10a, the highest among all the treatments; however, the yield of the EHT treatment with DI and FI was 1,282 and 1,327 kg/10a, respectively. These results indicate that growth and physiological disorder rate improved with the EHT treatment; however, there was a decrease in yield. Furthermore, the formation of guard cells was abnormal and malfunctional.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2009.03a
• /
• pp.14-20
• /
• 2009

Atmospheric pressure air plasma was applied for treatment of different kinds of natural bamboo fiber to improve their mechanical properties and surface characteristics, which are suitable for adhesion and dyeing. The tensile strength and Young modulus of bamboo fiber were significantly improved; SEM and AFM study show that the surface of fiber became cleaner and rougher after plasma treatment. Plasma treatment caused the cracking, removing of the protective skin of alkali-untreated fiber and etching to form a cleaner and rougher surface. The dyeability of both groups of bamboo fiber which are used for composite and textile purposes is significantly enhanced after treatment.

• Journal of Korean Society of Water and Wastewater
• /
• v.13 no.3
• /
• pp.91-100
• /
• 1999

Treatment conditions of DAF(Dissolved Air Flotation) and removal rates of VOCs(Volatile Organic Compounds) in mixed water of H raw water and VOCs were investigated. The used VOCs were benzene, toluene, ethylbenzene, and xylene in aromatic compounds and iso propyl mereaptan, n-butyl mereaptan, dimethyl disulfide, and iso butyl mercaptan in odors. The related parameters include water type, treatment method, clay concentration, pH condition, flocculation time, flotation time, per-cent recycle, water temperature, pressure. The removal rates of VOCs were different on treatment process and water condition. Treatment time was longer, removal rates of VOCs was higher. Water temperature was more important than pressure in DAF parameters. Molecular weight was related with removal rate in several kinds of VOCs were decraesed by competition of each component in II raw water. When algac blooming D water was treated by DAF, TCOD(Total chemical Oxygen Demand) and chorophyll a was removed over 96%.

• Textile Coloration and Finishing
• /
• v.8 no.6
• /
• pp.47-54
• /
• 1996

In order to develop the air flow finishing machine with low tension drying and surface modification by high impact effect, the treatment characteristics and the moving speed of fabrics was analysed and investigated in the newly developed system. The change of handle before and after treatment of fabrics measured using Kawabata system. The moving speed in air nozzle was affected by an air pressure of blower, and the maximum value was 1,000 m/min. In accordance with the change of handle, the treatment effect was very different compared with untreated fabrics. And the drape properties of fabrics increased about 10∼45% compared with untreated one.

• Restorative Dentistry and Endodontics
• /
• v.26 no.2
• /
• pp.171-179
• /
• 2001

The purpose of this study was to evaluate the shear bond strength of compomers according to dentin surface treatment. Two materials of compomer were devided into six groups. The compomer used in this study were Dyract AP(D) and F2000(F), Group 1 (DN) and 4(FN) were treated according to manufacturers instructions as control groups. Group 2(DE) and 5(FE) were treated with 37％ phosphoric acid and group 3(DA) and 6(FA) were treated with air abrasion unit (80 psi, 50 m aluminum oxide particles) respectively as experimental groups. After dentin surface treatment, compomers were bonded. Completed samples were stored in 100％ humidity. 37C during 7 days, and then, the shear bond strength of specimens were evaluated. The results were as follows: 1. In the case of Dyract AP, the shear bond strength was showed the highest value of 9.10 MPa in dentin surface treatment with air abrasion unit. but there were no significant differences to the other groups. 2. In the case of F2000. the shear bond strength was showed the highest value of 13.51MPa and there were significant differences to the other groups(p<0.05). 3. The shear bond strength of F2000 was higher than Dyract AP in each dentin surface treatment. and in the case of etching and air abrasion. there were significant differences(p<0.05). 4. As a result of observation of SEM. the most of fracture pattern was adhesive failure in group 1(DN), 2(DE) and 4(FN), and cohesive failure in group 3(DA), S(FE) and 6(FA).

• Journal of the Korean Academy of Esthetic Dentistry
• /
• v.7 no.1
• /
• pp.72-78
• /
• 1998

Recently, esthetic dentistry has been developed because beauty is pursued by both dentists and patients. A scope of esthetic treatment has been expanded and the roles of hygienists in dental treatment have also become of importance. Generally, we make use of the ultra-sonic scaler to remove the stains attached to teeth surfaces, but when we utilize the rubber cup and pumice in prophylaxis, this increases the hypersensitivity, patient's anxiety, and chairtime. So, we substitute Air-polishing that increases patient's satisfaction and decreases chairtime for above method, Here, I would like to explain indications and contraindications, advantages and disadvantages, and usages of Air-polilshing briefly.

• Geomechanics and Engineering
• /
• v.24 no.2
• /
• pp.129-141
• /
• 2021

The vacuum preloading method has been used in many countries for soil improvement and land reclamation. However, the treatment time is long and the improvement effect is poor for the straight-line vacuum preloading method. To alleviate such problems, a novel combined air booster and straight-line vacuum preloading method for shallow ground treatment is proposed in this study. Two types of traditional vacuum preloading and combined air booster and straight-line vacuum preloading tests were conducted and monitored in the field. In both tests, the depth of prefabricated vertical drains (PVDs) is 4.5m, the distance between PVDs is 0.8m, and the vacuum preloading time is 60 days. The prominent difference between the two methods is when the preloading time is 45 days, the injection pressure of 250 kPa is adopted for combined air booster and straight-line vacuum preloading test to inject air into the ground. Based on the monitoring data, this paper systematically studied the mechanical parameters, hydraulic conductivity, pore water pressure, settlement and subsoil bearing capacity, as determined by the vane shear strength, to demonstrate that the air-pressurizing system can improve the consolidation. The consolidation time decreased by 15 days, the pore water pressure decreased to 60.49%, and the settlement and vane shear strengths increased by 45.31% and 6.29%, respectively, at the surface. These results demonstrate the validity of the combined air booster and straight-line vacuum preloading method. Compared with the traditional vacuum preloading, the combined air booster and straight-line vacuum preloading method has better reinforcement effect. In addition, an estimation method for evaluating the average degree of consolidation and an empirical formula for evaluating the subsoil bearing capacity are proposed to assist in engineering decision making.

• Biomolecules & Therapeutics
• /
• v.7 no.2
• /
• pp.121-126
• /
• 1999

In an attempt to define the effects of hyperbaric oxygen treatment on the lipid peroxidation and oxygen free radical reactions in rats exposed to carbon monoxide, we studied malondialdehyde (MDA) level and activities of catalase and superoxide dismutase in the kidney of the rats exposed to carbon monoxide. Male Sprague-Dawley albino rats weighing 240 to 260 gm were used. Experimental groups consist of Control group (=breathing with air), HBO group (=exposed to hyperbaric oxygen 〔HBO, 3ATA, 100%〕 after air breath), CO group (=exposed to CO〔3,970 ppm〕after air breath), CO-Air group (=exposed to CO after air breath followed by air breath) and CO-HBO group (=exposed to CO after air breath followed HBO treatment). The CO group showed significantly higher MDA level, catalase activity and SOD activity as compared to that of control group. The CO-HBO group showed significantly lower MDA level as compared to that of CO group, and did not show significantly lower catalase activity and SOD activity as compared to that of CO group. These results suggest that the excessive oxygen free radicals is an important determinant in pathogenesis of CO-induced nephrotoxicity and HBO inhibits the lipid peroxidation caused by excessive oxygen free radicals in the kidney of the rats exposed to carbon monoxide.