• Journal of the Korean institute of surface engineering
• /
• v.53 no.6
• /
• pp.285-292
• /
• 2020

Ancient cultural heritage made up of wood and organic fibers have been easily disintegrated or decomposed by various microorganisms like bacteria and fungi. Here, we demonstrate the effectiveness of an atmospheric pressure plasma jet (APPJ) system to sterilize the microorganisms in tangible cultural heritage. We collected several specimens from the surface of ancient documents and wooden artifacts. Finally, two bacteria and two fungi were prepared and sterilized using the APPJ treatment. The APPJ system is beneficial to its simple apparatus, quick operation time, and cost-effectiveness. Bacteria were almost sterilized within only 1 min treatment using 15 % O2 and applied bias voltage of 100 V. In case of the fungi, sterilization rate reached over 83 % but difficult to reach over 90 % even 10 min treatment. According to the plasma diagnostics using optical emission spectroscopy, it was found that the reactive oxygen species such as OH groups are critical for sterilization of microorganisms. Although further efforts should be performed, we believe that efficient sterilization could be realized by the simple, quick, and portable APPJ treatment system.

• Culinary science and hospitality research
• /
• v.21 no.1
• /
• pp.1-14
• /
• 2015

Pork belly(PB) and pork shoulder(PS) parts were tested to find out chemical and physical characteristics and sensory evaluation with various cooking methods such as pan heating, boiling, grilling, steaming, charcoal heating, pan heating and double-layer pan filled with phase change material (PCM) cooking. The moisture contents of steamed PB and PS had higher results of 60.2% and 67.2% than other treatments. The highest results of crude fat contents in PB treatments was charcoal roasting as 33.2% (p<0.05) while grilling resulted the highest at 16.0% in the PS (p<0.05). In the crude protein contents, boiling treatment resulted the lowest at 15.4% while steaming was the highest at 18.9% in PB. Also, crude protein content of grilling treatment was 25.2%, a result significantly higher than in other cooking methods in PS. Heating loss, which has a close relationship with water holding capacity, showed the highest result in the charcoal treatment at 40.18% and 39.68% each in the both of PS and PS. In the result of shear force, the lowest result was oven treatment at $2.76kg/cm^2$ in PB (p<0.05) and double-layer pan heating at $3.67kg/cm^2$ in PS (p<0.05). L value in the color test of boiling treatment showed the highest result of 65.16 and 59.72 in the PB and PS respectively (p<0.05), however it scored the lowest of 2.32 in b value in PB (p<0.05). In the 9 point-scale sensory evaluation, grilling treatment showed the highest result of 7.56 in the overall palatability of PB (p<0.05). However, PS in the pan heating which scored 7.22 was the best result while having the lowest score of 5.88 in the boiling treatment (p<0.05).

• Journal of Environmental Science International
• /
• v.24 no.12
• /
• pp.1601-1608
• /
• 2015

This study evaluates heavy metal(Cu and Cr) adsorption characteristics produced from food waste charcoal extracted in an optimal operation condition after analyzing activated charcoal of iodine adsorption and heavy metals that derived from an activation process of carbide by the developed by-products of food waste treatment facility using the methods from previous studies. As experiment apparatus, this study used a tube-shaped high temp furnace. The mixing ratio of by-products of food waste treatment facility, carbide, and activation component($ZnCl_2$) was 1:1. The experiment was proceeded as adjusting the activation temperature from 400 to $800^{\circ}C$ and activation time from 30 to 120 minutes. The optimal activation condition for iodine absorption was 90 minutes at $700^{\circ}C$ and by using the produced food waste charcoal, this study conducted an experiment on absorption of heavy metals (Cu and Cr) as changing pH of artificial wastewater and stirring time. As a result, pH 7 showed the highest heavy metal decontamination ratio and in terms of stirring time, it revealed balance adsorption after 10 minutes. This result can be particularly applied as basic data for recyclability of high concentration organic waste, by-products of food waste treatment facility, as an food waste charcoal.

• Korean Journal of Acupuncture
• /
• v.29 no.2
• /
• pp.166-178
• /
• 2012

Objectives : This study was purposed to investigate the possibility of traction therapy as treatment method of scoliosis, of which occurrence rate was increasing with teenagers in Korea. Methods : 63 literatures, history, classification, and effectiveness of traction therapy were reviewed and the occurrences rate of scoliosis with teenagers in Korea was investigated. Results : Traction therapy as a treatment method on scoliosis, was originally developed by Hippocrates(460~385 BC), based on the historical record. Traction therapy is classified according to the tools engaged, the postures, the traction methods, and the areas for traction. The opinions on the effect of traction as treatment method were different depending on whether it is in Korea or outside of the country. Within the country, 75% of reports were positive on the effects of traction therapy, while outside of the country, about 74% of reports were negative. On the other hand, the occurrence rates of scoliosis with teenagers in Korea were increasing from 1.46%(1977) to 11.08%(2008). Conclusions : Unfortunately the effects of traction therapy on scoliosis were unclear but it seems to be different in the effects of manipulative therapy and mechanical or apparatus traction therapy. Systematic studies on traction therapy are needed, because of the increasing rate of scoliosis in Korea with teenagers.

• Textile Coloration and Finishing
• /
• v.14 no.6
• /
• pp.305-312
• /
• 2002

In order to give a silk-like touch to PET fabrics, the PET fabrics were treated with NaOH alkaline solution in various conditions. In alkaline treatment, the liquor flow type pilot weight reduction apparatus with magnetostrictive ultrasonic transducer was used for the study. The effects of ultrasonic application, treatment time and temperature at NaOH 4% and 6"A solution on the decomposition rate of PET fabrics. From the results of the decomposition rate of PET fabrics, the qualitative and quantitative analysis of oligomer after decomposition of PET fabrics carried out by the HPLC. On the other hand, the surface pore characteristics of decomposition PET fabrics measured by porosimetery. The pore characteristics on the surface of treated PET fiber depended on the decomposition rate and did not depend on the ultrasonic cavitation. The pore diameter of alkaline untreated PET fiber were 15A and those of treated PET fibers were 5~6$\AA$ at the maximum pore volume. The average pore sizes of fiber before and after treatment were 141 h and 160h, respectively. Total amount of oligomer of the untreated PET fibers were 1.70wt% and 67.7% of total oligomer occupied with PET cyclic trimer and PET cyclic tetramer. Total amount of oligomer of fiber with 26.9% and 48.0% of weight loss without ultrasonic application were 1.78wt% and 1.79wt%, respectively. Also total amount oligomer of fibers which were reduced 27.7% and 48.2% of weight loss with ultrasonic application were 1.74wt%. This result showed that the removal rate of oligomer in the process of alkaline hydrolysis with ultrasonic higher than that of without ultrasonic application.tion.

• Korean Journal of Veterinary Research
• /
• v.57 no.2
• /
• pp.89-95
• /
• 2017

This study was conducted to determine the effects of biophoton treatment during in vitro maturation (IVM) and/or in vitro culture (IVC) on oocyte maturation and embryonic development in pigs. An apparatus capable of generating homogeneous biophoton energy emissions was placed in an incubator. Initially, immature pig oocytes were matured in the biophoton-equipped incubator in medium 199 supplemented with cysteine, epidermal growth factor, insulin, and gonadotrophic hormones for 22 h, after which they were matured in hormone-free medium for an additional 22 hr. Next, IVM oocytes were induced for parthenogenesis (PA) or provided as cytoplasts for somatic cell nuclear transfer (SCNT). Treatment of oocytes with biophoton energy during IVM did not improve cumulus cell expansion, nuclear maturation, intraoocyte glutathione content, or mitochondrial distribution of oocytes. However, biophoton-treated oocytes showed higher (p < 0.05) blastocyst formation after PA than that in untreated oocytes (50.7% vs. 42.7%). In an additional experiment, SCNT embryos produced from biophoton-treated oocytes showed a greater (p < 0.05) number of cells in blastocysts (52.6 vs. 43.9) than that in untreated oocytes. Taken together, our results demonstrate that biophoton treatment during IVM improves developmental competence of PA- and SCNT-derived embryos.

• Journal of Ginseng Research
• /
• v.31 no.1
• /
• pp.23-33
• /
• 2007

Ginsenosides are one of the most well-known traditional herbal medicines frequently used for the treatment of cardiovascular symptoms in korea. The anti-ischemic effects of the mixture of ginsenoside $Rg_3$, and CK on ischemia-induced isolated rat heart were investigated through analyses of changes in hemodynamics ; blood pressure, aortic flow, coronary flow, and cardiac output. The subjects in this study were divided into four groups: normal control, the mixture of ginsenoside $Rg_3$ and CK, an ischemia-induced group without any treatment, and an ischemia-induced group treated with the mixture of ginsenoside $Rg_3$ and CK. There were no significant differences in perfusion pressure, aortic flow, coronary flow and cardiac output between them before ischemia was induced. The supply of oxygen and buffer was stopped for five minutes to induce ischemia in isolated rat hearts, and the mixture of ginsenoside $Rg_3$ and CK was administered during ischemia induction. Treatments of the mixture of ginsenoside $Rg_3$ and CK significantly prevented decreases in perfusion pressure, aortic flow, coronary flow, and cardiac output under ischemic conditions. In addition, hemodynamics (except heart rate) of the group treated with the mixture of ginsenoside $Rg_3$ and CK significantly recovered 60 minutes after reperfusion compared to the control group (mixture+ischemia vs ischemia - average perfusion pressure: 74.4${\pm}$2.97% vs. 85.1${\pm}$3.01%, average aortic flow volume: 49.11${\pm}$2.72% vs. 59.97${\pm}$2.93%, average coronary flow volume: 58.50${\pm}$2.81% vs. 72.72${\pm}$2.99%, and average cardiac output: 52.47${\pm}$2.78% vs. 63.11${\pm}$2.76%, p<0.01, respectively). These results suggest that treatment of the mixture of ginsenoside $Rg_3$ and CK has distinct anti-ischemic effects in ex vivo model of ischemia-induced rat heart.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.616-622
• /
• 2015

Current ballast water treatment technologies are applying chemical or electrical treatment technology which are not free from secondary environmental pollution. The purpose of this study is to treat the ballast water by shear stress without an additional environmental pollution and to find out the optimal treatment apparatus. We tried to treat ballast water by applying shear stress with two different type of combination of inner and outer cylinder, such as non-pattern type and groove type. In the case of non-pattern type of inner and outer cylinder, sterilization effect was comparatively low because of a slip between inner and outer cylinder. But in the case of groove type of inner and outer cylinder, sterilization effect was superior to the non-pattern type. With a same revolutional speed of 8000rpm, an extinction effect was acquired in the gap of 1 mm of inner and outer cylinder at non-pattern type, but 3mm of that of groove type.

• Journal of the Korean Society for Heat Treatment
• /
• v.12 no.2
• /
• pp.117-128
• /
• 1999

This study was carried out to investigate the surface characteristics of SCM440 steel nitrided with various nitrogen contents for 7 hours at $520^{\circ}C$ by using micro-pulse plasma nitriding apparatus of hot wall type. The effects of oxidation treatment was also investigated on plasma nitrided in 30% nitrogen and post oxidized SCM440 steel at $500^{\circ}C$ in $H_2O$ atmosphere. The ${\gamma}^{\prime}-Fe_4N$ and ${\varepsilon}-Fe_{2-3}N$ phases were detected in compound layer of the nitrided steel. As the content of nitrogen in plasma gas increased with 30, 50, 70% on the micro-pulse plasma nitriding for SCM440 steel, the thickness of compound, diffusion layer and the surface hardness were increased. From the wear test results, the best wear resistance was appeared in the condition of ductile ${\gamma}^{\prime}-Fe_4N$ phase formed specimen at 30% nitrogen, whereas that of the treated with 50% and 70% nitrogen decreased owing to the exfoliation of brittle ${\varepsilon}-Fe_{2-3}N$ phase in the compound layer. On the nitrided and subsequently oxidized SCM440 steel, the surface layer consisted of $Fe_3O_4$, ${\gamma}^{\prime}-Fe_4N$, and ${\varepsilon}-Fe_{2-3}N$ phases. In these treatments, the dissolution of nitrides affect hardness and hardening depth in compound and diffusion layers. For the nitrided in 30% nitrogen and post oxidized specimen at $500^{\circ}C$ for 1 hour, the wear resistance was lower than that of the only nitrided one in 30% nitrogen but higher than those of the nitrided ones in 50 and 70% nitrogen.

• The Korean Journal of Food And Nutrition
• /
• v.31 no.2
• /
• pp.301-307
• /
• 2018

In this study, a relatively effective process is used to sterilize Escherichia coli on the surface of micro-sized calcium citrate powder using nitrogen and argon as process gases in a low-temperature vacuum plasma treatment. The purpose of this study is to confirm and to introduce the effectiveness of homogeneous surface treatment for the sterilization of fine inorganic powder by the rotatable low-temperature RF plasma system designed by ourselves. The results of the test using 3M petrifilm showed that there were no remarkable spots in the case of the surface of plasma treated powder, whereas the untreated powder showed many blue spots, which indicating that the E. coli was alive. After 5 days, in the same samples, the blue spots were seen to be larger and darker than before, while the plasma-treated powder showed no changes. The results from FE-SEM analysis showed that the E. coli was damaged and/or destroyed by reactive species generated in the plasma space, resulting in the E. coli being sterilized. Furthermore, the sterilization effects according to the selected parameters ($N_2$ and Ar; flow rate 30 and 50 sccm) adapted in this study were mutually similar, regardless of such different process parameters, and this indicates that homogeneous treatment of powder surfaces could be more effective than conventional methods. Therefore, the plasma apparatus used in this study may be a practical method to use in a powerful sterilization process in powder-type food.