• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.984-987
• /
• 2002

Abrasive water-jet(AWJ) machining is a new cutting technology. The AWJ can cut various materials such as metal, glass and stone. However, the AWJ machining makes troubles including kerf, rounding and side taper. In this study, we investigated the correlation between parameters of abrasive water-jet machining and cutting characteristics. The machining parameters were the material thickness and the traverse speed. The experiment was conducted to cut the stainless steel(STS41) and the mild steel(SS41) specimens. The results of the experiment were presented as the relation between cutting conditions and troubles of a dimension error, a conner error, an uncut width and a kerf.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 춘계학술대회 논문집
• /
• pp.336-341
• /
• 1995

종래의 Cam 구동방식 Pirn Winder에서는 낮은 권취속도와 만권시 권취 Bobbin이 Cradle에서 이탈될 때 권취 Yarn의 대량손실, Pirn 형성시 사층의 붕괴에 따른 과다권취등 기술적 난제가 대두되었다. 이러한 문제점을 해결하기 위하여 구미선진국에서는 Micom 제어 Pirn Winder가 개발되었다. 국내에서는 이 기계를 전량 수입에 의존하고 있어 수입 대체가 시급하지만 선진국의 기술보호주의 때문에 기술도입도 어려운 실정이다. 본 논문에서는 Micom제어 Pirn Winder에서 기본적으로 사층이 무너지지않기 위한 권취량, Traverse속도, 사속(Yarn Speed), 스핀들의 각속도 등을 결정함으로써 기구 학적 제어를 할 수 있는 알고리즘을 제시하고 컴퓨터 모사실험을 통하여 타당성을 보였다.

• Journal of Biosystems Engineering
• /
• 제43권4호
• /
• pp.386-393
• /
• 2018

Purpose: Chicken cutting is done manually, which is inefficient, unhygienic, and carries a high accident risk during processing. This study develops and evaluates an automatic chicken cutting machine that suits small-scale workplaces. Methods: This study developed an automatic chicken cutting machine equipped with four traverse blades and two longitudinal blades. An experiment was conducted with various blade rotating speeds and tray feed rates to evaluate the machine's performance. The chicken loss rate and chicken piece weights were measured to calculate the coefficient of variation (CV), thereby determining processing uniformity. Results: The optimal cutting conditions with the smallest chicken loss rate were 0.05 m/s tray feed speed and 18.8 m/s and 16.4 m/s for the traverse and longitudinal blades, respectively. The processing ran at 55.3 chickens per hour and the chicken pieces were more uniform when using the device than for hand-work processed pieces. Conclusions: The loss rate increased in proportion to the cutting-blade rotation speed due to the high cutting rate in meat. The loss rate also increased as the tray feed speed slowed because the cutting blade pushed the chicken meat. The tray feed speed should be increased to improve the amount processed per hour.

• 열처리공학회지
• /
• 제28권6호
• /
• pp.315-321
• /
• 2015

Friction stir processing (FSP) was applied to fabricate AZ31/CNT (Carbon Nano Tube) surface composite for improvement of surface hardness of AZ31 Mg-based alloy. The effects of traverse speed of rotating tool and volume fraction of CNT (i.e., groove depth of 3 mm and 4 mm) on the soundness and hardness of the composite layer were investigated. Multi-walled CNTs were fully filled in a machined groove and stirring tool was rotated at the speed of 1400 rpm. Only under the tool traverse speed of 25 mm/min for the specimen with a groove depth of 3 mm, surface composite layer with no defect was successfully produced. Increased hardness of about 35% was observed in the composite layer.

• 반도체디스플레이기술학회지
• /
• 제14권4호
• /
• pp.30-37
• /
• 2015

This research aims to develop Look Ahead position interpolation algorithm for small size CNC machine controlled by PC based controller. Look Ahead scheme can process a bundle of CNC's linear interpolation commands simultaneously, which reduces acceleration and deceleration time within single linear interpolation command. The algorithm is derived as simple analytical form which can be adapted to PC based CNC system by C language programming. The performance of the algorithm was verified by tail stock machining G codes experimentally. The average traverse speed of the CNC machine was increased by 27.5% and the total traverse time also reduced by 27.2% with the Look Ahead scheme.

• 대한기계학회논문집
• /
• 제11권1호
• /
• pp.53-62
• /
• 1987

본 논문에서는 1 KW CW CO$_{2}$레이저 발생자장치를 사용하여 표면경화 처리 를 행할때 공정과 관련된 변수들이 용접부 및 표면경화층에 미치는 영향들을 이론과 실험을 통해서 규명하고, 이 결과들을 실제공정에 사용할 수 있는 기초자료로서 제시 하고자 한다. 이를 위해서 해석에 사용될 수 있는 유한요소법(Finite Element Meth- od)에 근거한 2차원 열유동 해석용 프로그램 및 데이타 처리 프로그램을 개발하고, 중 탄소강에 레이저 표면처리를 수행하여 실험 및 이론해석의 결과를 비교 검토하였다. 비교 검토하여 그 설정기준을 고찰하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 춘계학술대회 논문집
• /
• pp.13-17
• /
• 1993

Analytical models for the prediction of the size of hardened zone in laser surface hardening are presented. The models are based on the solutions to the problem of three-dimensional heat flow in plates with infinite thickness. The validity of the model was tested on medium carbon steel for Gaaussian mode of beam. Then the model for rectangular beam was used for the prediction of the size of harened zone on various hardening process parameters. From the calculation results it appeared that the size and shape of the hardened zone are strongly dependent on process parameters suchas beam mode, beam size, and traverse speed.

• 한국군사과학기술학회지
• /
• 제12권5호
• /
• pp.549-556
• /
• 2009

One of the basic technology for implementing the autonomy of UGV(Unmanned Ground Vehicle) is a path planning algorithm using obstacle and raw terrain information which are gathered from perception sensors such as stereo camera and laser scanner. In this paper, we propose a generation method of DVGM(Directional Velocity Grid Map) which have traverse speed of UGV for the five heading directions except the rear one. The fuzzy system is designed to generate a resonable traveling speed for DVGM from current patch to the next one by using terrain slope, roughness and obstacle information extracted from raw world model data. A simulation is conducted with world model data sampled from real terrain so as to verify the performance of proposed fuzzy inference system.

• 대한토목학회논문집
• /
• 제30권3D호
• /
• pp.215-222
• /
• 2010

일반적으로 평균속도란 어느 도로구간을 이동하는 차량의 평균통행시간에 기초한 통행속도를 의미하고, 도로의 서비스수준 평가를 위해 도로용량편람에서 제시하고 있는 평균통행속도가 효과척도로 사용되고 있다. 국내 대부분의 도시고속도로는 제한속도 80Km/h이하의 고속화도로로서 출퇴근시간대에 관계없이 체증문제를 안고 있다. 특히, 도시고속도로의 연결로 접속구간역내에서의 교통정체는 통행량 증가와 주변 간선도로와의 연계성이 부족하여 더욱 악화되고 있다. 따라서 본 연구의 목적은 도시고속도로의 연결로 접속구간역내에서의 교통특성을 파악하고, 파악된 교통특성을 중심으로 연결로 접속구간 내 평균속도를 추정하며, 추정된 평균속도의 타당성을 입증하는데 있다.

• 한국재료학회지
• /
• 제11권11호
• /
• pp.965-971
• /
• 2001

The objective of this study is to investigate the characteristics - microstructure, hardness, adhesive strength and friction coefficient - of the coatings with aging - treatment after optimizing internal- plasma spraying parameters for Al-30wt%Si powder as a basic research to manufacture the cylinder block bore for Al engine composed of Al-30wt%Si alloy on Al alloy, The optimum internal-plasma spraying parameters of Al-30wt%Si alloy are summarized as follows: voltage: 37.5V, current: 160A, working distance: 25mm, gun traverse speed: 4.5mm/s, rotating speed: 518m/min. The primary Si particles grew aggressively with increasing heat-treating temperature. The hardness of the as-sprayed coating was about Hv=275 but this value was abruptly decreased with increasing heat-treating temperature. And average friction coefficient of the coating was below 0.08 after heat treatment for 48h at $175^{\circ}C$.