• 한국진공학회지
• /
• 제6권S1호
• /
• pp.89-95
• /
• 1997

A new type of piexoelectric membrane traveling wave motor has been designed and forbricated. The small motor is composed by the stator which is the combination of annular/circular membrane and metal elastic base using as the common electrode at some time and the rotor which is placed on the metal elastic body. Thus the motor structure is simple and easy to fabricate. The material of a piezoelectric membrane is fabricated by sol-gel method or wear-down method. A piezoelectric traveling wave motor has been fabricated with the stator diameter 8mm The total thickness of the stator is 350$\mu$m. Under the alternative excitation voltage 10-12V the revolving speed of the rotor is more than 100RPM.

• Journal of Electrical Engineering and Technology
• /
• 제8권6호
• /
• pp.1415-1423
• /
• 2013

The traveling wave ultra-sonic motor (TWUSM) is operated through the frictional force between the rotor and the stator. Hence, the contact mechanism should be analyzed to estimate the motor performance. However, the nonlinearity of the contact mechanism of the TWUSM makes it difficult to propose a proper contact model and a characteristic analysis method. To address these problems, a novel contact model is proposed and be termed the cylindrical dynamic contact model (CDCM) in this research. An estimation method of the motor performance is proposed using the CDCM, an analytical method, and a numerical method. The feasibility and usefulness of the proposed characteristic analysis are verified through experimental data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.226-229
• /
• 2001

The combined transmission lines with the underground power cables are continuously expanded in power systems. So the fault of combined transmission line is increased every year as the complication of underground transmission line. In this paper. traveling wave theory and DWT wavelet transform are used for fast and accurate detection of fault location at the combined transmission line. Traveling wave travels to each bus like surge and repeats reflection and transmission till transient signal is completely disappeared. When fault is occurred on overhead and underground tine, the fault location detecting algorithm was performed with using continuous peak value time-delay of traveling wave reflected from A bus.

• 한국음향학회지
• /
• 제18권8호
• /
• pp.25-31
• /
• 1999

본 논문에서는 진행파를 이용하여 쌍방향으로 움직일 수 있는 새로운 구조의 초음파 리니어 모터를 개발하고, 그 시제품을 제작하였다. 설계과정에서는 유한요소해석법을 이용해 모터구조의 타당성을 검증하였고, 진행파가 왜곡되지 않는 최적구조, 재질, 크기, 경계조건을 결정하였다. 설계 결과에 따라 리니어 모터를 실제로 제작하고, 특성을 평가함으로써 개발된 새로운 구조의 이용 가능성을 확인하였다.

• 소음진동
• /
• 제9권5호
• /
• pp.906-913
• /
• 1999

Time-dependent period and energy of free vibration of a string, whose length varies with time at a constant rate, are investigated by a traveling wave method. When the string length is increased, the vibration period increase, but the free vibration energy decrease with time. However, when the string undergoes retraction, the vibration energy increases with time. String tension together with non-zero instantaneous velocity at the moving boundary results in energy variation. Analytical solutions by the traveling wave method are compared with previous results using the perturbation method and Kotera's approach.

• 한국광학회지
• /
• 제12권4호
• /
• pp.327-333
• /
• 2001

위상반전(phase reversal)시키는 전극구조를 갖는 진행파 광변조기에서 주파수응답의 추정을 간결한 형태로 제시하였다. 유도된 식을 근거로 한 모의전산을 통하여 위상반전 전극구조가 대역통과 특성을 가질 수 있음을 보였고 진행파전극의 마이크로파(MW) 파라미터를 변화시켰을 때 주파수응답에 미치는 영향을 분석하였다. 특히 MW 유효굴절률과 변조영역의 길이를 변화시킴으로써 대역통과 특성을 가지는 주파수 응답의 중심주파수와 대역폭을 효과적으로 조절할 수 있음을 보였다.

• ETRI Journal
• /
• 제31권6호
• /
• pp.765-769
• /
• 2009

In this paper, we present the fabrication of 40 Gb/s traveling-wave electroabsorption modulator-integrated laser (TW-EML) modules. A selective area growth method is first employed in 40 Gb/s EML fabrication to simultaneously provide active layers for lasers and modulators. The 3 dB bandwidth of a TW-EML module is measured to be 34 GHz, which is wider than that of a lumped EML module. The 40 Gb/s non-return-to-zero eye diagram shows clear openings with an average output power of +0.5 dBm.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.167-174
• /
• 1996

In this paper, a fault location algorithm is presented, which uses novel signal processing techniques and takes a new paradigm to overcome some drawbacks of the conventional methods. This new method for fault location on electric power transmission lines uses only one-terminal fault signals. The main feature of the method is hat it uses the high frequency components in fault signal and considers the influence of the source network by using a traveling wave propagation characteristics. As a result, we can develop a high speed, good accuracy fault locator.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권1호
• /
• pp.51-58
• /
• 1996

This report describes thick traveling-wave electrode formation and microwave transmission characteristics of the fabricated electrodes. Effective refractive indices of the microwave in the 5 micron CPW type traveling-wave electrodes is around 2.45 according to the results of time domain S parameter measurements. The bandwidth of the electrodes is about 10 GHz and could be extended to 15 GHz through optimization of the process. The developed process technique that enables plating of micropatterns upto 20 micron can be applied to broadband optical intensity modulators.

• Transactions on Electrical and Electronic Materials
• /
• 제9권5호
• /
• pp.181-185
• /
• 2008

Using the extensional vibration mode of PZT ring, a piezopump is successfully made. The PZT ring is polarized with thickness direction. The traveling extensional wave along the circumference of the ring is obtained by dividing two standing waves which are temporally and spatially phase shifted by 90 degrees from each other. The proposed piezopump is consisted of coaxial cylindrical shells that are bonded piezoelectric ceramic ring. The pump takes an unobtrusive operation into the simple displacing mechanism using peristaltic traveling waves without the physical moving parts. The finite elements analysis on the proposed pump model is carried out to verify its operation principle and design by the commercial FEM software. Components of piezopump were made, assembled, and tested to validate the concepts of the proposed pump and confirm the simulation results. The performance of the proposed piezopump is about 580 ${\mu}l/min$ in flow rate with the highest pressure level of 0.85 kPa, when the driving voltage is 150 $V_p$, 57 kHz.