• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.135-147
• /
• 2012

The benefit of traffic information on variable message sign can be divided into two. At the public level, the benefit of ATIS is the travel time saving, which is not only induced from ATIS, but also mixed with that of ATMS. In the economic appraisal of ITS, the benefit of ATIS has so far been regarded as the derived benefit from ATMS. At the user level, the benefit of ATIS is reduced driver uncertainty through the forward traffic status information. User can benefit from the information on VMS and therefore may have the willingness to pay for it. Recently attempt to qualify the value of information on VMS was increased, but there was a danger of distorting or over-estimates of the ATIS benefit because the related studies didn't consider the time-dependent attributes of traffic information and provided the single value. Estimates of the time-varying value should be needed for a rigorous economic appraisal of ATIS. In this study, we varied the value of information on VMS according to peak and non peak trip and verified the hypothesis that time-varying of value was statistically significant.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.58.1-58.1
• /
• 2010

In solar cell module manufacturing, single solar cells has to be joined electrically to strings. Copper stripes coated with tin-silver-copper alloy are joined on screen printed silver of solar cells which is called busbar. The bus bar collects the electrons generated in solar cell and it is connected to the next cell in the conventional module manufacturing by a metal stringer using conventional hot air or infrared lamp soldering systems. For thin solar cells, both soldering methods have disadvantages, which heats up the whole cell to high temperatures. Because of the different thermal expansion coefficient, mechanical stresses are induced in the solar cell. Recently, the trend of solar cell is toward thinner thickness below 180um and thus the risk of breakage of solar cells is increasing. This has led to the demand for new joining processes with high productivity and reduced error rates. In our project, we have developed a new method to solder solar cells with a laser heating source. The soldering process using diode laser with wavelength of 980nm was examined. The diode laser used has a maximum power of 60W and a scanner system is used to solder dimension of 6" solar cell and the beam travel speed is optimized. For clamping copper stripe to solar cell, zirconia(ZrO)coated iron pin-spring system is used to clamp both joining parts during a scanner system is traveled. The hot plate temperature that solar cell is positioned during lasersoldering process is optimized. Also, conventional solder joints after $180^{\circ}C$ peel tests are compared to the laser soldering methods. Microstructures in welded zone shows that the diffusion zone between solar cell and metal stripes is better formed than inIR soldering method. It is analyzed that the laser solder joints show no damages to the silicon wafer and no cracks beneath the contact. Peel strength between 4N and 5N are measured, with much shorter joining time than IR solder joints and it is shown that the use of laser soldering reduced the degree of bending of solar cell much less than IR soldering.

• Spatial Information Research
• /
• v.13 no.3 s.34
• /
• pp.309-321
• /
• 2005

To analyze travel demand fur transportation policy and transportation planning, it is important to construct realistic and reliable traffic data. And it needs a user friendly system to demonstrate transportation problems in the transportation planning and transportation management aspect. Generally, to construct network for analysis and collection about social and economical data is a core of transportation planning model. However, it takes a lot of time and effect. To overcome this problem GIS is more effective and efficient in data processing, such as selecting, editing and visualizing, etc. However, it is an early stage to use CIS in the transportation problems. This paper shows a new GIS-T system. The system can give traffic information and plan transportation planning using GIS which has ability as spatial representation and spatial analysis. To build this system, we design interfaces that are able to communicate transportation package for analysis with GIS and manage network efficiently, such as editing and examination. And we also develop a module for traffic information processing to handle spatial data and add it on the system. The proposed system shows more realistic transportation network modeling because the system presents more effective conditions to analyze network. And it can be a tool that can analyze various transportation problems.

• Journal of Korean Society of Transportation
• /
• v.34 no.3
• /
• pp.222-233
• /
• 2016

Recently, mobile phone data was applied in travel demand modeling as a new source of dynamic population movement. This study is also aimed to estimate "occupancy population" during a given period of time within a given spatial region using mobile phone data. An occupancy population was defined as the number of people residing or moving within a given time and space. In case of Seoul Metropolitan area, we divided the area into a number of administrative districts as zones for analysis and estimated the occupancy population of each zone by mobile phone data collected by SK telecom Co., a wireless telecommunication provider in Korea. For the expansion of mobile phone data, a new concept of "communication probability" was introduced and applied in the estimation of occupancy population of each zone by the hour. We compared the estimated number with the daytime population and the daytime population index referred by the Statistics Korea. The results showed that a positive correlation existed between the estimated number and the statistical number by nationwide survey. It was concluded that mobile phone data could be more cost-effective sources than a conventional survey method to estimate the pattern of population movement by the hour or by the day.

• Journal of Korean Society of Transportation
• /
• v.26 no.2
• /
• pp.17-24
• /
• 2008

Traffic accident forecasting model has been developed steadily to understand factors affecting traffic accidents and to reduce them. In Korea, the length of highways is over 3,000km, and it is within the top ten in the world. However, the number of accidents-per-one kilometer highway is higher than any other countries. The rapid increase of travel demand and transportation infrastructures since 1980's may influence on the high rates of traffic accident. Accident severity is one of the important indices as well as the rate of accident and factors such as road geometric conditions, driver characteristics and type of vehicles may be related to traffic accident severity. However, since all these factors are interacted complicatedly, the interactions are not easily identified. A structural equations model is adopted to capture the complex relationships among variables. In the model estimation, we use 2,880 accident data on highways in Korea. The SEM with several factors mentioned above as endogenous and exogenous variables shows that they have complex and strong relationships.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.3
• /
• pp.205-214
• /
• 2015

Rapid urbanization and industrialization have caused increased demand for underground structures such as cable, and other utility tunnels. Recently, it has become very difficult to construct new underground structures in downtown areas because of civil complaints, and engineering problems related to insufficient information about existing underground structures, cable tunnels in particular. This lack of information about the location and direction-of-travel of cable tunnels is causing many problems. To solve these problems, this study was focused on the use of geophysical exploration of the ground in a way that is theoretically, different from previous electrical resistivity surveys. An electric field analysis was performed on the ground with cable tunnels using Gauss' law and the Laplace equation. The electrical resistivity equation, which is a function of the cable tunnel direction, the cable tunnel location, and the electrical conductivity of the cable tunnel, can be obtained through electrical field analysis. A field test was performed for the verification of this theoretical approach. A field test results provided meaningful data.

• Journal of Korean Society of Transportation
• /
• v.17 no.3
• /
• pp.61-70
• /
• 1999

The Purpose of this study is to test whether Braess Paradox (BP) can be revealed in a real world network. Fer the study, Namsan 2nd tunnel case is chosen, which was shut down for 3 years for repair works. The revelation of BP is determined by analyzing network-wise traffic impacts followed by the tunnel closure. The analysis is conducted using a network simulation model called SECOMM developed for the congestion management of the Seoul metropolitan area. Also, the existence of BP is further identified by a before-after traffic survey result of the major arterials nearby the Namsan 2nd tunnel. The model estimation expected that the closure of Namsan 2nd tunnel improve the network-wise average traffic speed from 21.95km/h to 22.21km/h when the travel demand in the study area and congestion Pricing scheme on Namsan 1st & 3rd tunnels remain unchanged. In addition, the real world monitoring results of the corridors surrounding Namsan 2nd tunnel show that the average speed increases from 29.53km/h to 30.37km/h after the closure. These findings clearly identify the BP Phenomenon is revealed in this case.

• Journal of Korean Society of Transportation
• /
• v.24 no.7 s.93
• /
• pp.65-79
• /
• 2006

The ATIS(Advance Traveler Information System), as one part of ITS, is a system aiming to disperse traffic volume on transportation networks by providing traffic information to transportation users on pre-trip and en-route trips. One of tools in ATIS is usage of VMS(Variable Message Signs). It provides to the drivers with direct information about state of processing direction. which is considered as the most effective method in ATIS. The purposes of providing VMS information are classified two categories. One is to provide simple information to drivers for their convenience. The other is to manage traffic demand to improve transportation network performance. However, for more effective and reliable VMS information, several strategies should be taken into account. The main VMS management strategy is "Traffic Diversion Strategy for minimum delay" when traffic congestion or incident are occurred. For effective operation. firstly. reasonable diversion traffic volume is determined by network traffic condition Secondly, it is necessary to make providing information strategy which reflects driver response behavior for controling diversion traffic volume. This paper focuses on the providing real-time route guidance information by VMS when congestion is occurred by the incidents. This sturdy estimates time-dependent system optimal diversion rate that inflects travel time and queue lengths using traffic flow simulation model on base Cellular Automata. In addition, route choice behavior models are developed using binary logit model for traffic information variable by traffic system controller. Finally, this study provides time-dependent VMS massage contents and degree of providing information in order to optimize the traffic flow.

• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.61-72
• /
• 2011

In the benefits of ITS, there are intangible gains from real-time traffic information as well as classical gains such as travel time saving. These intangible gains are difficult to be estimated by existing transportation investment appraisal commonly used in SOC investment. The major reason is not because of the absence of methodology but because of the absence of generalized values of particular benefits from real time traffic information. This research explores the value of real-time traffic information on VMS that is the most representative of ITS services, by using CVM with Double Bounded Dichotomous Choice Question. Willingness-To-Pay (WTP) functions of drivers are built with survival functions using various types of probability distribution functions such as Exponential, Log-logistic, and Weibull functions. The results reveal that Log-logistic distribution is the most appropriate distribution model to estimate WTP, and the estimated coefficients are stable through LR (Likelihood Ratio) test. For the further study, it is recommended to perform statistical tests of temporal and spatial transferability that is not examined in this research due to the lack of data.

• Spatial Information Research
• /
• v.21 no.5
• /
• pp.33-41
• /
• 2013

Recently, the number of disasters has been seriously increasing. The total damages by the natural or man-made disasters during the past years resulted in tremendous fatalities and recovery costs. It is necessary to have efficient emergency evacuation management which is concerned with identifying evacuation route, and the estimation of evacuation and clearance times. An emergency evacuation model is important in identifying critical locations, and developing various evacuation strategies. In that existing evacuation models have focused on route analysis for indoor evacuation, there are only a few models for areawide emergency evacuation analysis. Therefore, we developed a mesoscopic model by using Cube Avenue and performed evacuation simulation, targeting road network in City of Fargo, North Dakota. Consequently, a mesoscopic model developed in this study is used to carry out dynamic analysis using network and input variable of existing travel demand model. The results of this study show that the model is an appropriate tool for areawide emergency evacuation analysis to save time and cost. Henceforth, the results of this study can be applied to develop a disaster evacuation model which can be used for a variety of disaster simulation and evaluation based on scenarios in the local metropolitan area.