• 지질공학
• /
• 제14권2호
• /
• pp.179-187
• /
• 2004

Frequency Domain Reflectometry(FDR) system과 길이 7cm의 측정센서를 사용하여 에탄을 믹싱리퀴드(EML)를 주입함으로씨 포화된 흙의 유전율상수 변화를 파악하기 위한 실내실험을 실시하였다. 측정센서에 대한 유전율 측정 범위의 확인 및 물과 동일한 비중을 갖는 EML이 포화된 흙의 공극을 통하여 이동 경로를 파악하기 위함이다. EML 확산실험에서는 포화 흙 칼럼 상단부의 배출구가 EML 주입구로부터 이격될수록 포화 흙의 공극을 통한 EML의 확산범위가 확대됨을 확인하였다. 그리고 EML 유동실험의 결과에서는 포화된 흙 칼럼에 대한 주입과 동시에 일정한 간격으로 설치된 모든 측정센서에서 유전율의 변화를 파악하였다. 따라서 EML 주입에 따른 포화 흑의 공극 내에 존재하는 물의 치환이 충분히 가능하며 공극을 통한 이동성도 함께 확인하였다.

• Journal of Acupuncture Research
• /
• 제25권4호
• /
• pp.105-116
• /
• 2008

Objectives : The aim of this study was to compare the effect of acpuncture and electroacupuncture of low(EA(L)) and high(EA(H)) frequencies at San Yin Jiu($SP_6$) and sham point in rats. We made suppressed state of intestinal motility with loperamide in rat and carried out needle retention acupuncture, low frequency electro-acupuncture and high frequency electro-acupuncture at ($SP_6$) in rat devided into pre-treatment group and post-treatment group. We fed charcoal to them after the treatment and measured the travel rate of charcoal in the gastrointestine track to analyze which treatment affected more in intestinal hypermotility Results : 1. Examining intestinal motility of normal rat treated with electro-acupuncture at $SP_6$, high frequency electro-acupuncture significantly increased intestinal motility. 2. Pre-treated with acupuncture at $SP_6$ significantly suppressed intestinal motility. 3. Post treatment with acupunture and low frequency electro-acupuncture at $SP_6$ showed significant increase of intestinal motility. Conclusions : As folowing study there were 21 groups to find out which treatment showed significant increase of intestinal motility and pre-treated acupuncture, post-treated with acupunture and low frequency electro-acupuncture at $SP_6$ was highly significant with control at the figure than any other groups.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2012년도 춘계학술발표대회
• /
• pp.68.1-68.1
• /
• 2012

The best part of graphene is - charge-carriers in it are mass less particles which move in near relativistic speeds. Comparing to other materials, electrons in graphene travel much faster - at speeds of $10^8cm/s$. A graphene sheet is pure enough to ensure that electrons can travel a fair distance before colliding. Electronic devices few nanometers long that would be able to transmit charge at breath taking speeds for a fraction of power compared to present day CMOS transistors. Many researches try to check a possibility to make it a perfect replacement for silicon based devices. Graphene has shown high potential to be used as interconnects in the field of high frequency electrical devices. With all those advantages of graphene, we demonstrate characteristics of electrical and optical properties of graphene such as the effect of graphene geometry on the microwave properties using the measurements of S-parameter in range of 500 MHz - 40 GHz at room temperature condition. We confirm that impedance and resistance decrease with increasing the number of graphene layer and w/L ratio. This result shows proper geometry of graphene to be used as high frequency interconnects. This study also presents the optical properties of graphene oxide (GO), which were deposited in different substrate, or influenced by oxygen plasma, were confirmed using different characterization techniques. 4-6 layers of the polycrystalline GO layers, which were confirmed by High resolution transmission electron microscopy (HRTEM) and electron diffraction analysis, were shown short range order of crystallization by the substrate as well as interlayer effect with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups on its layers. X-ray photoelectron Spectroscopy (XPS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation, and Fourier Transform Infrared spectroscopy (FTIR) and XPS analysis shows the changes in oxygen functional groups with nature of substrate. Moreover, the photoluminescent (PL) peak emission wavelength varies with substrate and the broad energy level distribution produces excitation dependent PL emission in a broad wavelength ranging from 400 to 650 nm. The structural and optical properties of oxygen plasma treated GO films for possible optoelectronic applications were also investigated using various characterization techniques. HRTEM and electron diffraction analysis confirmed that the oxygen plasma treatment results short range order crystallization in GO films with an increase in interplanar spacing, which can be attributed to the presence of oxygen functional groups. In addition, Electron energy loss spectroscopy (EELS) and Raman spectroscopy confirms the presence of the $sp^2$ and $sp^3$ hybridization due to the disordered crystal structures of the carbon atoms results from oxidation and XPS analysis shows that epoxy pairs convert to more stable C=O and O-C=O groups with oxygen plasma treatment. The broad energy level distribution resulting from the broad size distribution of the $sp^2$ clusters produces excitation dependent PL emission in a broad wavelength range from 400 to 650 nm. Our results suggest that substrate influenced, or oxygen treatment GO has higher potential for future optoelectronic devices by its various optical properties and visible PL emission.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제8권6호
• /
• pp.349-353
• /
• 2003

The physiological characteristics of cultures of very high cell mass (e.g. 10g cell mass/L), termed“ultrahigh cell density cultures”is reviewed. A close relationship was found between the length of the optical path (OP) in flat-plate reactors and the optimal cell density of the culture as well as its areal (g m$\^$-2/ day$\^$-1/) productivity. Cell-growth inhibition (GI) unfolds as culture density surpasses a certain threshold. If it is constantly relieved, a 1.0cm OP reactor could produce ca. 50% more than reactors with longer OP, e.g. 5 or 10cm. This unique effect, discovered by Hu et al. [3], is explained in terms of the relationships between the frequency of the light-dark cycle (L-D cycle), cells undergo in their travel between the light and dark volumes in the reactor, and the turnover time of the photosynthetic center (PC). In long OP reactors (5cm and above) the L-D cycle time may be orders of magnitude longer than the PC turnover time, resulting in a light regime in which the cells are exposed along the L-D cycle, to long, wasteful dark periods. In contrast, in reactors with an OP of ca. 1.0 cm, the L-D cycle frequency approaches the PC turnover time resulting in a significant reduction of the wasteful dark exposure time, thereby inducing a surge in photosynthetic efficiency. Presently, the major difficulty in mass cultivation of ultrahigh-density culture (UHDC) concerns cell growth inhibition in the culture, the exact nature of which is awaiting detailed investigation.

• 천문학논총
• /
• 제30권2호
• /
• pp.691-693
• /
• 2015

Radio sources are very weak, as they can travel through large distances. Radio sources also have photons with low energies compared to others electromagnetic waves (EM). Microwave photons have a little more energy than radio waves, infrared photons have still more, then visible, ultraviolet, X-rays, and the most energetic electromagnetic wave is gamma-rays. Radio astronomy studies are restricted due to radio frequency interference (RFI) produced by people. If this disturbance is not minimized, it poses critical problems for astrophysical studies. The purpose of this paper is to profile RFI maps in Peninsular Malaysia with a minimum mapping technique for RFI interference. Decision-making processes using GIS (Geographical Information System) for the selection requires gathering information for a variety of parameters. These factors affecting the selection process are also taken into account. In this study, various factors or parameters are involved, such as the availability of telecommunications transmission (including radio and television), rainfall, water lines and human activity. This mapping step must be followed by RFI site testing in order to identify areas of low RFI. This study will benefit radio astronomy research, especially regarding the RFI profile.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1295-1302
• /
• 2005

This paper shows experimental evaluation results of the nano-positioning planar scanner used in the scanning probe microscope. The planar scanner is composed of flexure guides, piezoelectric actuators and feedback sensors as like explained in detail in Ref. (5). First, the fabrication methods were explained. Second, as the static Properties of the Planar scanner. we evaluated the maximum travel range & crosstalk. Also, we presented the correcting method for crosstalk using electric circuits finally. as the dynamic properties of the planar scanner, we evaluated the first resonant frequency. Also, we presented the actual AFM(atomic force microscope) imaging results with up to 2Hz imaging scan rate. Experimental results show that properties of the proposed planar scanner are well enough to be used in SPM applications like AFM.

• International journal of advanced smart convergence
• /
• 제13권2호
• /
• pp.166-171
• /
• 2024

Recently, there has been an increasing trend in the role of social media in tourism marketing. We analyze changes in tourism marketing trends using tourism marketing keywords through social media networks. The aim is to understand marketing trends based on the analyzed data and effectively create, maintain, and manage customers, as well as efficiently supply tourism products. Data was collected using web data from platforms such as Naver, Google, and Daum through TexTom. The data collection period was set for one year, from December 1, 2022, to December 1, 2023. The collected data, after undergoing refinement, was analyzed as keyword networks based on frequency analysis results. Network visualization and CONCOR analysis were conducted using the Ucinet program. The top words in frequency were 'tourists,' 'promotion,' 'travel,' and 'research.' Clusters were categorized into four: tourism field, tourism products, marketing, and motivation for visits. Through this, it was confirmed that tourism marketing is being conducted in various tourism sectors such as MICE, medical tourism, and conventions. Utilizing digital marketing via online platforms, tourism products are promoted to tourists, and unique tourism products are developed to increase city branding and tourism demand through integrated tourism content. We identify trends in tourism marketing, providing tourists with a positive image and contributing to the activation of local tourism.

• International Journal of Advanced Culture Technology
• /
• 제12권1호
• /
• pp.270-275
• /
• 2024

Introduction. In this study, purpose is to analize the types of golf tourism, inbound or outbound, by using big data and see how movement of industry is being changed and what changes have been made during and after Covid-19 in golf industry. Method Using Textom, a big data analysis tool, "golf tourism" and "Covid-19" were selected as keywords, and search frequency information of Naver and Daum was collected for a year from 1 st January, 2023 to 31st December, 2023, and data preprocessing was conducted based on this. For the suitability of the study and more accurate data, data not related to "golf tourism" was removed through the refining process, and similar keywords were grouped into the same keyword to perform analysis. As a result of the word refining process, top 36 keywords with the highest relevance and search frequency were selected and applied to this study. The top 36 keywords derived through word purification were subjected to TF-IDF analysis, visualization analysis using Ucinet6 and NetDraw programs, network analysis between keywords, and cluster analysis between each keyword through Concor analysis. Results By using big data analysis, it was found out option of oversea golf tourism is affecting on inbound golf travel. "Golf", "Tourism", "Vietnam", "Thailand" showed high frequencies, which proves that oversea golf tour is now the re-coming trends.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권10호
• /
• pp.5168-5181
• /
• 2017

The popularity of augmented reality (AR) applications and games are in high demand. Currently, the best common platform to implement AR services is on a smartphone, as online games, navigators, personal assistants, travel guides are among the most popular applications of smartphones. However, the power consumption of an AR application is extremely high, and therefore, highly adaptable and dynamic low power control schemes must be used. Dynamic voltage and frequency scaling (DVFS) schemes are widely used in smartphones to minimize the energy consumption by controlling the device's operational frequency and voltage. DVFS schemes can sometimes lead to longer response times, which can result in a significant problem for AR applications. In this paper, an AR response time monitor is used to observe the time interval between the AR image input and device's reaction time, in order to enable improved operational frequency and AR application process priority control. Based on the proposed response time monitor and the characteristics of the Linux kernel's completely fair scheduler (CFS) (which is the default scheduler of Android based smartphones), a response time step control (RSC) scheme is proposed which adaptively adjusts the CPU frequency and interactive application's priority. The experimental results show that RSC can reduce the energy consumption up to 10.41% compared to the ondemand governor while reliably satisfying the response time performance limit of interactive applications on a smartphone.

• 한국석유지질학회지
• /
• 제12권1호
• /
• pp.14-19
• /
• 2006

광파 (또는 전자파)는 물에서 전달에너지의 감쇠 (attenuation)가 너무 심하여 수층을 투과하는데 한계가 있지만 음파의 경우는 매우 좋은 전달매체로 작용한다. 따라서 수중 또는 해저탐사에 사용되는 대부분의 탐사장비와 기술들은 음파를 이용하는 방법을 채택하고 있다. 일반적으로 파동의 특성은 주파수에 있다. 음원 (sound source)이 저주파일수록 투과력 (penetration)은 높아지지만 해상력 (resolution)은 낮아진다. 고주파의 경우는 그 반대이다. 즉 저주파는 바다 깊은 (또는 먼) 곳까지의 정보를 알 수 있지만 해상력은 낮다. 그러나 고주파는 깊이 (또는 멀리)까지는 도달할 수 없지만 얕은 (또는 가까운)곳의 정보는 저주파보다 훨씬 상세한 정보를 제공한다. 해저자원조사에 적용되는 음파탐사방법은 여러 가지가 있으나, 본 논의에서는 해저지형을 조사하는 음향측심, 지층구조와 퇴적층의 형태를 조사하는 지층탐사, 그리고 해저면을 평면적 영상으로 표현하는 측면주사음향탐사, 이 세 가지를 중심으로 해저탐사에 적용되는 음파특성을 논의하였다.