• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.208-214
• /
• 2012

This paper presents a novel approach based on the loci of instantaneous symmetrical components called "Wing Shape" which requires the measurement of three input stator currents and voltages to diagnose interturn insulation faults in three phase induction motors operating under different loading conditions. In this methodology, the effect of unbalanced supply conditions, constructional imbalances and measurement errors are also investigated. The sizes of the wings determine the loading on the motor and the travel of the wings while their areas determine the degree of severity of the faults. This approach is also applied to detect open circuit faults or single phasing conditions in induction motors. In order to validate this method, experimental results are presented for a 5 hp squirrel cage induction motor. The proposed technique helps improve the reliability, efficiency, and safety of the motor system and industrial plant. It also allows maintenance to be performed in a more efficient manner, since the course of action can be determined based on the type and severity of the fault.

• Journal of Korean Society of Transportation
• /
• v.17 no.5
• /
• pp.7-18
• /
• 1999

This Paper focuses on analyzing the influences of Teleservice on travel behavior and trip demand based on the individual behavior model. The first step is to classify individuals into different Person groups who will follow similar behavior Patterns in terms of travel and communication. And then, the effect of Teleservice on trip demand is estimated using hypothetical scenario. The results on the ability of each person group to adapt themselves to Teleservice show that full-time housekeepers and senior citizens are more likely to be alienated. It is also found that transition probability to Teleservice is high for activities in bank or public office where simple forms of information such as data or text are exchanged. On that basis, it is estimated that in Seoul the savings on trip demand by Teleservice will be 7.6% of total daily trip generations.

• Journal of Welding and Joining
• /
• v.11 no.2
• /
• pp.74-85
• /
• 1993

Effect of Si metal powders addition with the plasma transferred arc(PTA) overlaying process on characteristics of the alloyed layer in aluminum alloy(A5083) has been investigated. The overlaying conditions were 175-250A in plasma arc current, 500mm/min in travel speed, the 5-20g/min in powder feeding rate. Main results obtained are summarized as follows. 1)Sufficient size of molten pool on surface of base metal was required for forming an alloyed layer; in a fixed travel, the formation of alloyed layer with clear and beautiful surface depend upon the plasma arc current and powder feeding rate; the greater plasma arc current and the smaller powder feeding rate were, the better bead was formed. Optimum alloyed conditions by which an excellent alloyed bead obtained was 225A in plasma arc current. PTA process made it possible to form an alloyed layer with up to 67wt% Si. 2)Microstructure in the alloyed layer was in accord with prediction from the Al-Si phase diagram 3)The hardness of the alloyed layer increased in proportion to Si content. 4)As volume fraction of primary Si increased, the specific wearness of the alloyed layer was significantly improved. However, no further improvement was found when the volume fraction was greater than about 30%. 5)Utilizing the PTA process, a crack free alloyed layer with maximum hardness of about Hv 310 could be obtained.

• Nuclear Engineering and Technology
• /
• v.52 no.3
• /
• pp.589-596
• /
• 2020

Many components in the assembly section of Sodium-cooled Fast Reactor are made of good corrosionresistant 316 LN Stainless Steel material. To avoid self-welding of the components with the coolant sodium at elevated temperature, hardfacing is inevitable. Ni-based colmonoy-5 is used for hardfacing due to its lower dose rate by Plasma Transferred Arc process due to its low dilution. Since Ni-Cr-B-Si alloy becomes very fluidic while depositing, the major height of the weld overlay rests inside the groove. Hardfacing is also done over the plain surface where grooving is not possible. Therefore, grooved and ungrooved hardfaced specimens were prepared at different travel speeds. Fe content at every 100 ㎛ of the weld overlay was studied by Energy Dispersive Spectroscopy and also the micro hardness was determined at those locations. A correlation between iron dilution from the base metal and the micro hardness was established. Therefore, if the Fe content of the weld overlay is known, the hardness at that location can be obtained using the correlation and vice-versa. A new correlation between micro hardness and dilution coefficient is obtained at different locations. A comparative study between those specimens is carried out to recommend the optimum travel speed for lower dilution.

• Journal of the Korean Society for Precision Engineering
• /
• v.19 no.4
• /
• pp.132-139
• /
• 2002

In GMAW(Gas Metal Arc Welding) processes, bead geometry (penetration, bead width and height) is a criterion to estimate welding quality. Bead geometry is affected by welding current, arc voltage and travel speed, shielding gas, CTWD (contact-tip to workpiece distance) and so on. In this paper, welding process variables were selected as welding current, arc voltage and travel speed. And bead geometry was reasoned from the chosen welding process variables using neuro-fuzzy algorithm. Neural networks was applied to design FL(fuzzy logic). The parameters of input membership functions and those of consequence functions in FL were tuned through the method of learning by backpropagation algorithm. Bead geometry could be reasoned from welding current, arc voltage, travel speed on FL using the results learned by neural networks. On the developed inference system of bead geometry using neuro-furzy algorithm, the inference error percent of bead width was within $\pm$4%, that of bead height was within $\pm$3%, and that of penetration was within $\pm$8%. Neural networks came into effect to find the parameters of input membership functions and those of consequence in FL. Therefore the inference system of welding quality expects to be developed through proposed algorithm.

• Journal of Wetlands Research
• /
• v.8 no.1
• /
• pp.73-82
• /
• 2006

In this study, the hydraulic channel routing model is applied to analyze water surface elevation pattern on the Nakdong river in flood cases. The procedure to apply FLDWAV model is presented to solve the Saint-Venant Equations by using four points implicit finite differential scheme. And the flood travel time is studied for reasonable dam management. As this results, variable assumption and constraint are followed to evaluate flood travelling time by hydraulic model. A guideline of reasonable dam's decision making considering downstream effect is showed by this constructed model, and scientific hydraulic analysis is possible by it.

• Ocean and Polar Research
• /
• v.36 no.3
• /
• pp.289-302
• /
• 2014

This paper aims to evaluate the indirect economic damages to anglers of the marine recreational charter caused by marine pollution associated with the Herbei Spirit vessel, which spilled 12,547 kl of crude oil in Taean coastal areas in December 2007. In order to evaluate the indirect cost to anglers of the charter fishing, consumer surplus for charter fishing is estimated using a Poisson model (PM), a negative binomial model (NBM), a truncated Poisson model (TPM), and a truncated negative binomial model (TNBM), which account for the characteristics of count data (non-negative discrete data), for individual travel cost method (ITCM). Because of over-dispersion problem in PM and TPM, NBM and TNBM are considered to be more appropriate statistically. All parameters such as income, fishing careers, travel cost and catch that are estimated are statistically significant and theoretically valid. Based on TNBM results, consumer surplus per trip and per person was estimated to be 277 thousand won, total consumer surplus per person and per year about 2.3 million won, and the marginal effect of consumer surplus on % changes in catch rate is about 33 thousand won. The consumer surplus was converted into total indirect economic damages for aggregation which are evaluated to be 125 billion won, reflecting the number of anglers and damage rate.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.3
• /
• pp.69-82
• /
• 2011

This paper tried to find out what the main factors are to impact on satisfaction level of transit passengers at Incheon airport. Incheon airport has made lots of transit facilities and services to attract transit passengers from neighboring airports to increase transit rate as high as advanced foreign airports such as Heathrow, Schiphol and Hong Kong. A survey was performed on 450 transit passengers resting at airport transit lounge in airside area. According to the result, it was found out to be significant factors affecting satisfaction of transit that convenience of security screening, price of duty-free product, a direction board & signage and terminal orientation among Chinese transit passengers. On the other hands, it seemed that Japanese transit passengers thought diversity of airline routes, convenient transfer flight schedule, total transit time and terminal orientation are major variables affecting their satisfaction. Considering the effect of demographic factors, Chinese passenger's satisfaction was more affected by age, travel purpose, the number of travel per year and flight destinations. However, Japanese transit passenger's satisfaction was only affected by the flight destinations, especially willing to travel to North America and Europe.

• Journal of the Society of Disaster Information
• /
• v.11 no.4
• /
• pp.506-514
• /
• 2015

In this study, a new analytical techniques is proposed for seeking policy alternatives aimed at objectives of TDM, increasing the transit rideshare. Determinants of travel mode such as personal characteristics, lifestyle, and urban spatial characteristics are interdependent and have combined effect on decision. In addition, individuals, groups, and regional characteristics have interdependencies at different levels. Unlike traditional regression analysis, hierarchical analysis model has the advantage of identifying interdependencies and complex relationship between the combined impact factors. This analysis technique is expected to be a significant contribution to seek a more efficient TOD policy.

• Journal of Navigation and Port Research
• /
• v.33 no.7
• /
• pp.477-482
• /
• 2009

In this paper the order picking problem in warehouses is considered, a topic which has received considerable attention from the international academic body in recent years. The order picking problem deals with the retrieval of order items from prespecified locations in the warehouse, and its objective is usually the minimization of travel time or travel distance. Hence, a well-thought order picking policy in combination with an appropriate storage policy will enhance warehouse efficiency and reduce operational costs. This paper starts with a literature overview summarizing approaches to routing order pickers, assigning stock-keeping units to pick locations and designing warehouse layouts. Since the layout design might affect both storage and routing policies, the three factors are interdependent with respect to order picking performance. To test these interdependencies, a simulation experiment was set up, involving two types of warehouse layout, four types of storage policy, five well-known heuristics and five sizes of order picking list. Our results illustrate that from the point of view of order picking distance minimization it is recommended to equip the warehouse with a third cross aisle, although this comes at the cost of a certain space loss. Additionally, we propose a set of most appropriate matches between order picking heuristics and storage policies. Finally, we give some directions for further research and recommend an integrated approach involving all factors that affect warehouse efficiency.