• The Korean Journal of Pain
• /
• 제13권2호
• /
• pp.237-241
• /
• 2000

Vertebral compression fractures commonly afflict the elderly. Some patients suffer from severe mechanical pain in spite of treatments with strong analgesics and bracing. Vertebroplasty, which was originally used for vertebral hemangioma, is effective for patients who do not respond to these more conservative treatments. However, the procedure has some risk. Leaks of bone cement into perineural tissues can be a serious complication. In contrast to the lumbar vertebrae, the outer margin of the pedicle of the thoracic vertebrae is almost in line with the outer margin of the body. This, combined with the thinner pedicle of the thoracic vertebrae, makes proper needle placement difficult. The posterolateral approach is preferred to the transpedicular approach in order to avoid the danger of destroying the inner cortex of the pedicle. But there can be a problems with the standard posterolateral approach. The rib can be broken, the pleura can be punctured. A new and safer approach is possible. Before penetrating the bone, the needle is positioned at the upper margin of the transverse process, 5 mm away from the pedicle. To achieve this positioning, the needle must puncture the skin 1~1.5 cm laterally and 3~5 mm cranially to the target point on the bone. This approach was used for 10 patients and we achieved good results with no serious complication.

• 대한정형외과스포츠의학회지
• /
• 제8권2호
• /
• pp.125-128
• /
• 2009

양측 쇄골 골절은 양측 견관절 부위에 강한 외력이 동시에 작용하여 발생하는 드문 골절이다. 편측 쇄골 골절은 보존적 치료로 대부분 만족할 만한 임상 경과를 보이나 동시에 양측이 골절 되는 경우 극심한 통증과 재활 운동의 어려움을 겪게 되며, 호흡운동 장애를 초래할 수도 있다. 저자들은 다발성 늑골 골절 및 혈흉과 흉추 가시돌기 골절을 동반한 양측 쇄골 골절 환자에 대해 수술적 치료를 통해 견관절 기능 회복을 얻었으며, 호흡운동 장애 문제를 해결하였기에 문헌 고찰과 함께 보고하고자 한다.

• Steel and Composite Structures
• /
• 제13권4호
• /
• pp.397-408
• /
• 2012

This paper describes the refined 3-D finite element (FE) modeling of composite frames composed of concrete-filled steel tubular (CFST) columns and steel-concrete composite beams based on the test to get a better understanding of the seismic behavior of the steel-concrete composite frames. A number of material nonlinearities and contact nonlinearities, as well as geometry nonlinearities, were taken into account. The elastoplastic behavior, as well as fracture and post-fracture behavior, of the FE models were in good agreement with those of the specimens. Besides, the beam and panel zone deformation of the analysis models fitted well with the corresponding deformation of the specimens. Parametric studies were conducted based on the refined finite elememt (FE) model. The analyzed parameters include slab width, slab thickness, shear connection degree and axial force ratio. The influences of these parameters, together with the presence of transverse beam, on the seismic behavior of the composite frame were studied. And some advices for the corresponding seismic design provisions of composite structures were proposed.

• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2002년도 추계학술발표대회 논문집
• /
• pp.127-130
• /
• 2002

The 2.5 vol% TiNi/6061Al composites were fabricated by permanent mold casting, and its microstructures and tensile test for the cold rolled composites with maximum 50% reduction ratio were investigated. In the case of TiNi fiber with 2mm interval in preform, the interface bonding of fabricated composites were good. EPMA analysis results were found the small amount of Mg, Si segregated interface of diffusion layer. Transverse section of TiNi fiber was decreased with increasing reduction ratio and 40% reduction ratio was observed microcrack from TiNi fiber. And the tensile strength of composites at 38% reduction ratio was 194MPa. In the case of over 38% reduction ratio, the decrease of the tensile strength was due to TiNi fiber rupture by excess working. The fracture mode was appeared brittle fracture with increasing reduction ratio

• 대한기계학회논문집A
• /
• 제25권4호
• /
• pp.654-661
• /
• 2001

In this study, fatigue growth behavior of the transverse crack, which was the most dangerous damage among the various types of rail defects, was investigated using the notched keyhole specimen under constant amplitude loadings. Fatigue limit of smooth specimen in rail steel at R=0 was 110MPa, and the fatigue crack initiation life in the region of the low stress amplitude (ie. long life) occupied the major portion of the total fatigue life. The fatigue strength under variable amplitude loading was converted to the equivalent fatigue strength based upon. Miners rule, which was estimated approximately 9% lower than that under constant amplitude loading. Also, in the low ΔK(sub)rms region ($\leq$21MPa√m), fatigue crack growth rate (da/dN) under constant amplitude loading was higher than that under variable amplitude loading, whereas the tendency was reversed in the high ΔK(sub)rms region. It is believed that this behavior is due to the transition of fracture appearance.

• 소성∙가공
• /
• 제23권4호
• /
• pp.199-205
• /
• 2014

The current study examines the effect of the analytical parameter values on the theoretical forming limit diagram (FLD) based on the Marciniak-Kuczynski model (M-K model). Tensile tests were performed to obtain stress-strain curves and determine the anisotropic properties in the rolling, transverse and diagonal direction of SPCC sheet materials. The experimental forming limit curve for SPCC sheet material was obtained by limiting dome stretching tests. To predict the theoretical FLD based on the M-K model, the Hosford 79 yield function was employed. The effects of three analytical parameters - the exponent of the yield function, the initial imperfection parameter and the fracture criterion parameter - on the M-K model, were examined and the results of the theoretical FLD were compared to the experimentally measured FLD. It was found that the various analytical parameters should be carefully considered to reasonably predict the theoretical FLD. The comparison of the acceptable forming limit area between the theoretical and experimental FLD is used to compare the two diagrams.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제27권5호
• /
• pp.488-491
• /
• 2005

A 3-year-old female, 5kg, Shih-tzu developed an acute onset of depression, disorientation, hypersalivation, nystagmus after falling down 2 meter height place. In plain skull radiography, there was fracture line in the frontal and parietal bones and next day magnetic resonance imaging examination was performed. Magnetic resonance imaging of the brain was performed with 3.0 Tesla unit. Under general anesthesia, the dog was placed in prone with its head positioned in a birdcage coil. Transverse, sagittal and coronal fast spin echo images of the brain were obtained with the following pulse sequences: T1 weighted images (TR = 560 ms and TE = 18.6 ms) and T2 weighted images (TR = 3500 ms and TE = 80 ms). Magnetic resonance imaging showed epidural hematoma in the left frontal area resulting in compression of the adjacent brain parenchyma. Left lateral ventricle was compressed secondarily and the longitudinal fissure shifted to the right, representing mass effect. The lesion was iso-to slightly hyperintense on T1 weighted image and iso-slightly hypointense signal on T2 weighted image. At necropsy, there was a skull fracture and epidural hematoma in the left frontal area. Magnetic resonance imaging of epidural hematoma is reviewed.

• Steel and Composite Structures
• /
• 제12권1호
• /
• pp.53-72
• /
• 2012

In this study, the physically-based failure models for matrix and fibers in compression and tension loading are introduced. For the 3D stress based fiber kinking model a modification is proposed for calculation of the fiber misalignment angle. All of these models are implemented into the finite element code by using the advantage of damage variable and the numerical results are discussed. To investigate the matrix failure model, purely in-plane transverse compression experiments are carried out on the specimens made by Glass/Epoxy to obtain the fracture surface angle and then a comparison is made with the calculated numerical results. Furthermore, shear failure of $({\pm}45)_s$ model is investigated and the obtained numerical results are discussed and compared with available experimental results. Some experiments are also carried out on the woven laminated composites to investigate the fracture pattern in the matrix failure mode and shown that the presented matrix failure model can be used for the woven composites. Finally, the obtained numerical results for stress based fiber kinking model and improved ones (strain based model) are discussed and compared with each other and with the available results. The results show that these models can predict the kink band angle approximately.

• 연구논문집
• /
• 통권23호
• /
• pp.127-140
• /
• 1993

The drive pulley, which is employed for loading and unloading raw materials in a steel mill, is usually manufactured by use of various welding processes. In this study the weldment in the pulley, in which TIG and $CO_2$ welding processes are used, has been analyzed from view point of fracture mechanics. Fracture toughness tests have been performed according to ASTM E813. A servo-hydraulic testing machine (10kN) has been employed. Also the crack propagation tests (Mode I) have been performed with compact tension specimen in compliance with ASTM E647. To predict the critical crack size in the weldment, finite element stress analysis for the drive pulley under real operating conditions have been performed. In addition, the residual stresses at the weldment and in heat-affected zone have been obtained by hole drilling method. The planar critical crack size have been predicted for the drive pulley by considering the stress analysis results and the residual stresses due to welding process. For the drive pulley considered in this study, it has been concluded that the most important factor in determining the critical crack size is the welding residual stress in the transverse direction. Also the effect of stress concentration at the root of the weldment have been noticeable. For the planar crack, the fatigue crack growth life from an initial crack size of 2mm to the critical crack size obtained as in the above have been predicted. The predicted lives were between 55, 900 and 72, 000 cycles depending on the shape of the elliptical crack. The predicted lives were in fairly good agreement for the drive pulley considered in this study.

• Composites Research
• /
• 제12권6호
• /
• pp.53-64
• /
• 1999

LCP원섬유(fibril)와 폴리아미드6 (PA6)수지로 사출성형된 복합재료 박판(molded thin composite plaques)의 미세구조와 굽힘강도에 대한 에폭시수지 함유율의 효과를 살펴보았다. 성형은 LCP원섬유의 용융점 이하에서 하였으며 이렇게 만들어진 판재는 횡방향 배향을 보이는 두께 $65-120{\mu\textrm{m}}$의 표피층(surface skin layer), 유동방향과 거의 일치하는 배향을 보이는 표피아래층(sub-skin layer), 아크형 곡선유동형태를 보이는 심층(core layer)으로 구성되어 있었다. 에폭시함유율이 달라도 각 층의 미세구조방향은 유사하였으나 에폭시함유율이 증가함에 따라 LCP영역(domain)이 원섬유상에서 층상구조로 변했고 거시적 파괴진로(fracture path)는 인장형에서 전단형으로 바뀌었다. 또한 에폭시 4.8vol%에서 가장 우수한 굽힘강도와 파단변형율을 보였다. 굽힘강도를 수치해석한 결과 에폭시성분을 복합재에 부가하면 각 층의 두께와 미세구조 같은 기하학적인 형태가 변하면서 각 층 자체의 탄성계수와 강도가 열등화 되었음을 알았다.