• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.729-731
• /
• 2002

This paper deals with 2D and 3D analyses by finite element method for the characteristics of reluctance type transverse flux linear motor. Although 3D analysis is essential because of the characteristics by flux direction. 2D analyses are also used by considering the effective axial length and using the equivalent reluctance 2D model. The thrust, the normal force and the coenergy of the machine are calculated and compared by the results of the three analysis methods.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.124-126
• /
• 1999

A transverse flux linear induction motor is studied to assess the feasibility of its application in urban transportation and conveyor and so on. To analyze the TFLIM with E-type, the flux density, thrust and normal force is computed by using an analytical method and 2-D finite element method. TFLIM which the rated thrust is 50[N] is designed and experimented.

• 대한전기학회논문지
• /
• 제39권1호
• /
• pp.29-35
• /
• 1990

This paper proposes a tow-dimensional magnetic flux distribution analysis of the double-sided linear induction motor(DLIM). Both the longitudinal end-effect and the transverse edge-effect, which are due to the finite length and width of the primary stator, are considered. Also each force which is due to the variation of slip frequency was computed to show the fact that the thrust force of DLIM is dependent on both the longitudinal end-effect and the transverse edge-effect. To ascertain the propriety of this analysis, the simulated results of the magnetic flux density distribution in the airgap are compared to the experimental data.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 하계학술대회 논문집 B
• /
• pp.1052-1054
• /
• 2004

This paper deals with a Double type Transverse Flux Linear Motor(TFLM) which can be applied to high power system. This type can reduce overall system volume because of the configuration which has double flux path of prototype per phase, and less number of phase and turns. This TFLM is based on permanent magnet excitation, and the pole shape is designed to reduce attraction force between stator and mover poles. In the paper, the basic configuration of double type and the principle of movement are introduced. After performing the characteristic analysis by 3-dimensional equivalent magnetic circuit network, the results are discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 B
• /
• pp.1146-1148
• /
• 2002

Highly precise position control is essentially required in stead/transient state in liner motor. The overall performance of position control system is depend on the accuracy of the position information and the performance of the speed controller in low speed range. In this paper, When Load is changed that the simulation results confirm the validity of the proposed estimation and control scheme, and Dynamic characteristics of the designed Transverse Flux Linear Motor are simulated and estimated using Matlab/simlunk.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.948-951
• /
• 2003

The design and analysis of electrical machines often require analytical models for performance assessment and system simulation. Inductances are important parameters of these models. In this paper, the methods of calculating apparent and incremental inductances are introduced for a transverse flux linear motor, which has a peculiar coil shape. The computation is accomplished by nonlinear three dimensional finite element method(FEM) and equivalent magnetic circuit network(EMCN). The improved method has been verified by a test result.

• 전력전자학회논문지
• /
• 제7권3호
• /
• pp.281-288
• /
• 2002

본 논문은 영구자석 여자 횡축형 선형 전동기(TFLM)를 이용한 가진기 제어 시스템을 구현하고자 한다. 제안된 가진기는 대상 물체에 정격 전류에서 최대 700[N]의 가진력과 넓은 변위 및 주파수 운전 범위를 갖는 진동운동을 제공한다. 또한 가진기에 적용된 TFLM은 구조적으로 높은 추력비(전동기 추력/전동기 중량=N/Kg)를 가지므로 전체 시스템의 부피가 감소된다. 따라서 기존의 유압식 가진기를 제안한 가진기로 대체할 경우 효율 및 유지, 관리면에서 많은 장점이 있다. 가진 제어를 위한 제어기의 입력은 가진 주파수와 변위이며 제어량은 이동자의 순시 위치와 속도이고 출력은 가진기에 인가되는 전류이다. 이 전류는 전압형 PWM 컨버터로 제어된다 우선 가진기 제어시스템의 제어 알고리즘과 운전 특성을 고찰하고 해석하기 위해 동적 시뮬레이션을 수행한 후 DSP 제어기와 IGBT PWM 컨버터를 구현하여 실제 실험 결과와 비친, 검토하였다.

• 반도체디스플레이기술학회지
• /
• 제4권1호
• /
• pp.9-16
• /
• 2005

In this paper, with loosely coupled transformer Relies-parallel resonant type DC/DC converter is analyzed and adopted to the power source of a TFLM(Transverse Flux Linear Motor). To get more efficient operating mode of the series-parallel resonant type DC/DC converter, theoretical analysis using normalized parameters are accepted. The analysis includes a specially made ferrite transformer with two separately wound half cores in order to evaluate analytically and experimentally the changes in magnetizing the leakage fluxes and inductances caused by the distance between the halves. The proposed converter must be operated in switching Pattern III among the three switching patterns for the Zero Voltage Switching operation. According to Pulse Frequency Modulation(PFM) control method, the output voltage of the proposed circuit can be controlled. The results of the theoretical development are compared with practical measurements from a prototype system.

• 전력전자학회논문지
• /
• 제11권5호
• /
• pp.471-479
• /
• 2006

LCD 원판이 세대별로 대형, 중량화됨에 따라 제조, 공정라인의 자동 반송장비도 대형화 되어 가고 있는 추세다. 기존 스토커는 크레인의 주행축에 회전형 전동기와 기계적 동력변환 장치를 사용하고 있어, 복잡한 구조와 기계적 마찰에 의한 잦은 유지, 보수가 필요하게 되고 파티클 발생을 최소화 시켜야 하는 문제점을 안고 있다. 이런 문제점들을 해결하기 위해, 본 논문에서는 단위면적당 추력이 큰 영구자석 여자 횡자속 선형전동기를 적용하고 제안된 제어 알고리즘 및 제어기, 전력변환장치를 제작해서 대형, 고출력, 장거리화 되고 있는 7세대 스토커의 주행축에 실험, 검증하였다.

• 전기학회논문지
• /
• 제60권12호
• /
• pp.2246-2253
• /
• 2011

This paper presents the error correction method of magnetic position sensor using recursive least square method (RLSM) with forgetting factor. Magnetic position sensor is proposed for linear position detection of the linear motor which has tooth shape stator, consists of permanent magnet, iron core and linear hall sensor, and generates sine and cosine waveforms according to the movement of the mover of the linear motor. From the output of magnetic position sensor, the position of the linear motor can be detected using arc-tan function. But the variation of the air gap between magnetic position sensor and the stator and the error in manufacturing process can cause the variation in offset, phase and amplitude of the generated waveforms when the linear motor moves. These variations in sine and cosine waveforms are changed according to the current linear motor position, and it is very difficult to compensate the errors using constant value. In this paper, the generated sine and cosine waveforms from the magnetic position sensor are compensated on-line using the RLSM with forgetting factor. And the speed observer is introduced to reduce the effect of uncompensated harmonic component. The approaches are verified by some simulations and experiments.