• Journal of the Korean Society for Nondestructive Testing
• /
• v.34 no.1
• /
• pp.23-30
• /
• 2014

The wear characteristics of $SiC_f$/SiC composites were evaluated according to the alignment direction of the fibers, and the elastic wave-generated friction was detected and analyzed in wearing. The friction coefficient and wear loss were similar in the longitudinal and the transverse direction of the fibers. However, these values were lower in the vertical direction of the fibers because of the brittle nature of the fiber. The friction coefficient and the wear loss were directly proportional to each other. The dominant frequencies were 58.6 kHz for monolithic SiC and 117.2 and 136.7 kHz for $SiC_f$/SiC composites, respectively.

• Journal of the Korean Institute of Navigation
• /
• v.17 no.3
• /
• pp.85-92
• /
• 1993

In connection to the design of high speed vessels, the numerical simulation is carried out to make clear the property of flows and breaking phenomena around the catamaran. It is because the bradking phenome-non is closely related to the free-surface turbulent flow. The free-surface wave and transverse velocity vectors are calculated around the twin and demi hull of the catamaran. Computed results are applied to detect the appearance of sub-breaking waves around the hull. The critical condition for their appearance is studied at two Froude numbers of 0.45 and 0.95. The nu-merical analysis shows that the breaking is more serious near the twin hull rather the demi hull. To simu-late the flows, the Navier-Stokes solver is invoked with a free-surface. The computation is made only in half a domain because it is symmetric in the shape.

• Laser Solutions
• /
• v.6 no.1
• /
• pp.25-31
• /
• 2003

5052 aluminum alloy sheets of 2mm thickness were butt welded using a continuous wave Nd:YAG laser with and without Ar shielding gas. Vickers hardness, transverse-weld tensile and bulge tests were carried out to investigate the effect of Ar shielding gas on the mechanical properties and formability of laser welds. Porosity in the weld metals was investigated using an optical microscope. Mechanical properties and formability of 5052 aluminum alloy laser welds were degraded compared to those of base metal. However, those properties were improved due to the reduced size and number of porosity when Ar shielding gas was used.

• Journal of electromagnetic engineering and science
• /
• v.10 no.3
• /
• pp.127-131
• /
• 2010

In this paper, the problem of electromagnetic transmission via slits in a cavity inside a conducting screen of finite thickness has been considered in the case that the transverse electric(to the slit axis) polarized plane wave is incident on a slit. The problem is solved numerically by the method of moments and the results are compared with those obtained from an equivalent circuit suitable for a case in which the slit width is infinite and the structure is modified to the two partially overlapped conducting planes. It is observed that when the cavity is resonated, the effective slit width reaches its maximum value of $1/\pi$ wavelengths, irrespective of the actual slit width and the incidence angle. When the thickness of the conducting plane is much smaller than the wavelength, the numerical results for the effective slit width(or transmission width) agree well with those obtained from the equivalent circuit, even though the slit is as narrow as the thickness of the conducting plane.

• ETRI Journal
• /
• v.34 no.1
• /
• pp.126-129
• /
• 2012

An ultra-thin hexagonal microwave metamaterial absorber is described. It can absorb any polarized transverse electromagnetic wave because of its hexagonal shape. In spite of its very thin structure, almost $0.028{\lambda}g$, the absorber achieved 99% absorptivity at 11.35 GHz in experimental results because of the increased coupling losses, showing good agreement with simulation results. In addition, this high absorbance is unchanged for any polarized waves with the same frequency.

• Journal of ILASS-Korea
• /
• v.3 no.3
• /
• pp.1-13
• /
• 1998

In this study, an experimental study was performed to investigate the breakup mechanism of vaporizing droplet. A well-controlled experimental apparatus was used to study breakup mechanisms of a monodisperse stream of drops injected into a transverse high temperature and velocity air stream. The experiments gave information$ about the microscopic structure of the liquid drop breakup process, drop breakup regimes, and drop trajectories in high temperature flow region. The breakup time, drop acceleration and wavelength of surface instability wave were measured from a high-magnification and double spark photography. The two instability theories, i.e., Kelvin-Helmholtz instability and Rayleigh-Taylor instability, were estimated by comparing the calculated data with the measurements. The results showed that the breakup time in high temperature flow condition is shortened because the surface tension is decreased by the increase of gas temperature.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.621-624
• /
• 2012

A new miniaturized 4-port waveguide generating a transverse electromagnetic wave is proposed. The waveguide presents enhanced performance of higher field uniformity in extended test volume up to an increased test frequency limit compared to that of the conventional 2-port waveguide. The advantageous features of the proposed waveguide have been obtained through a new design scheme based on effective miniaturization maintaining good impedance matching. Consequently, we can provide a more accurate electromagnetic compatibility test method, covering larger devices operating in higher frequencies, which is a marked improvement upon the conventional approaches.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2006.04a
• /
• pp.111-118
• /
• 2006

The elastic buckling strength of a corrugated culvert made of orthotropic material such as FRP was evaluated. The height and length of a corrugated wave and the thickness of the culvert were considered as factors affecting the buckling strength of the culvert. And also, the ratio of the longitudinal stiffness and transverse stiffness was considered as the parameter affecting on the buckling strength of the used orthotropic material. Buckling strengths of various corrugated culvert models with different shapes and stiffness ratio were evaluated by FE analyses and a formula to estimate the elastic buckling strength was suggested from the regression with FE analysis results. Analysis results show that a corrugated culvert has superior buckling strength to a general flat pipe and the suggested formula estimates accurate buckling strength of the corrugated culverts made of orthotropic material.

• Laser Solutions
• /
• v.9 no.1
• /
• pp.25-29
• /
• 2006

This study aimed to investigate the change of mechanical properties with the rolling direction and shielding condition during laser welding of AZ31 magnesium alloy. AZ31 magnesium alloy sheets of 1mm thickness were welded using a continuous wave Nd:YAG laser with and without Ar shielding gas. The effect of Ar shielding gas and rolling direction on the mechanical properties were investigated using Vickers hardness, transverse-weld tensile. Porosity in the weld metals was investigated using an optical microscope. The experimental results showed that mechanical properties of AZ31 magnesium alloy laser welds were upgraded compared to those of base metal. Mechanical properties of AZ31 magnesium alloy laser welds were not substantially changed when Ar shielding gas was supplied.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.28A no.9
• /
• pp.680-684
• /
• 1991

The scattering problem of a transverse electric (TE) plane wave by strip grating with a dielectric slab over a ground plane is analyzed by the method of moments. By use of equivalence principle, surface magnetic current density on the shorted slot is expanded in a series of Chebyshev polynomial a satisfying the appropriate edge condition. Numerical results for reflection coefficient are obtained and compared with other available results. Our numerical results obtained from the present method are in good agreement with other result available in the literature.