• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 가을 학술발표회 논문집
• /
• pp.29-34
• /
• 2001

An experimental study was conducted to investigate the effectiveness of transverse reinforcement in reinforced concrete tied columns subjected to monotonically increasing axial compression. Eighteen large-scale columns(260$\times$260$\times$120mm) were fabricated to simulate similarly an actual structural members size. Effects of main variables such as the concrete compressive strength, the tie configuration, the transverse reinforcement ratio, the tie spacing, and the spatting of the concrete cover were studied in this research program.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.141-146
• /
• 2002

The purpose of this study is to develop a reasonable design for transverse confinement reinforcement considering ductility and required transverse confinement reinforcement of RC bridge columns. In order to develop relationships between the curvature ductility and required transverse confinement reinforcement for design purpose, the analysis using the computer program NARCC have been carried out for parametric studies. Based on the results from the parametric studies, an equation for calculating the required transverse confinement reinforcement based on ductility demand was developed for seismic design of RC bridge columns. The equations proposed by this study will provide more reasonable and more effective design guidelines for performance-based seismic design of RC bridge columns.

• KIEAE Journal
• /
• 제7권4호
• /
• pp.105-111
• /
• 2007

As this study investigates the influence about type of transverse reinforcement, spacing of transverse reinforcement(s), volumetric ratios of transverse reinforcement(${\rho}s$) of ultra-high strength concrete columns. It try to offer to resonable basic data of the confined model for the ultra-high concrete of in reinforced concrete columns. Experimental tests with large scaled columns were conducted under concentric axial loads. The ultra-high strength concrete (100MPa) was used. From this test result, it evaluate influence of the strength enhancement and ductility enhancement, important variables about behavior of the confined concrete by confinement of ultra-high strength reinforced concrete.There are two ways to improve the confinement effect of high strength concrete columns through the increase of amounts and/or strength of transverse reinforcement.

• Structural Engineering and Mechanics
• /
• 제67권1호
• /
• pp.93-104
• /
• 2018

The seismic behavior of reinforced concrete (RC) short columns with limited transverse reinforcement is investigated in this paper through an experimental program. The experimental program consists of four small-scale RC columns with an aspect ratio of 1.7, which are tested to the axial failure stage. The cracking patterns, hysteretic responses, strains in reinforcing bars, displacement decomposition and cumulative energy dissipation of the tested specimens are reported in detail in the paper. The effects of column axial load are investigated to determine how this variable might influence the performance of the short columns with limited transverse reinforcement. Brittle shear failure was observed in all tested specimens. Beneficial and detrimental effects on the shear strength and drift ratio at axial failure of the test specimens due to the column axial load are found in the experimental program, respectively.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.37-40
• /
• 2004

An experimental study was conducted to investigate the stress-strain behavior of confined concrete columns according to transverse reinforcement volumetric ratio. Uniaxial loading tests of eleven column specimens$(250\times100\times500mm)$ with rectangular section were conducted to study effect of confinement. The main variables in this test are transverse reinforcement volumetric ratio and cross tie arrangement. the results indicate that the strength and the ductility of confined concrete columns are subjected to transverse reinforcement volumetric ration and cross tie arrangement.

• 한국구조물진단유지관리공학회 논문집
• /
• 제14권5호
• /
• pp.102-109
• /
• 2010

이 논문에서는 고강도 횡보강근을 가진 철근콘크리트 보의 부착 거동을 연구하였다. 제안된 비폐쇄형 U자 보강근의 부착 성능을 평가하기 위하여 총 4개의 철근콘크리트 보를 실험하였다. 제안된 비폐쇄형 U자 보강근은 쉽게 설치할 수 있는 구조를 가졌을 뿐만 아니라 부착 균열을 억제함으로써 철근콘크리트 보의 부착 성능을 증가시킬 수 있다. 이 연구에서는 실험체의 부착 응력과 미끄러짐을 구하기 위하여 Ichinose가 제안한 실험방법을 따랐다. 주요 실험변수는 횡보강근의 항복강도와 보강근비 및 구속의 형태로 하였다. 실험결과, 제안된 비폐쇄형 U자 보강근은 고강도 횡보강근을 사용한 철근콘크리트 보의 부착 성능을 효과적으로 향상시켰음을 확인할 수 있었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.241-248
• /
• 2001

The ductility of circular hollow reinforced concrete columns with one layer of longitudinal and spiral reinforcement placed near the outside face of the section and the steel tube placed on the inside face of the section is investigated. Such hollow sections are confined through the wall thickness since the steel tube is placed. The results of analytical moment-curvature analyses for such hollow sections are compared with those for the circular section with the sane diameter. In this study, moment-curvature analyses are conducted with Mandel's confined concrete stress-strain relationship in which the effect of confinement is to increase the compression strength and ultimate strain of concrete. The moment-curvature analyses confirmed that the ductility is primarily influenced on the ultimate strain. The variables influenced on the ultimate strain is the ratio and yield strength of confining reinforcement and the compression strength for confined concrete. From this ultimate strain - the transverse reinforcement ratio relationship, the transverse reinforcement ratio for circular hollow reinforced columns with confinement is proposed. The proposed transverse reinforcement ratio is confirmed by experimental results.

• 한국구조물진단유지관리공학회 논문집
• /
• 제22권5호
• /
• pp.82-90
• /
• 2018

원자력 발전소에는 No.36(D36)이상의 대구경 철근이 사용되는데 이러한 대구경 철근으로 갈고리 정착을 할 경우, 기준에서 요구하는 구부림 및 갈고리 길이로 인해 설계 및 배근에 있어 큰 어려움을 겪을 수 있다. 이러한 문제를 해결하기 위한 방안으로 확대머리 철근을 사용할 수 있다. 2008년 개정된 ACI 318에서는 확대머리철근의 정착길이식을 도입하였으며, 제정 배경 연구를 근거로 하여 횡보강근의 영향력을 무시하고 있다. 그러나 확대머리 철근이 겹침이음이나 컷오프 구간에서 사용될 경우, 인장재에 의해 피복 콘크리트를 밀어내는 힘이 발생하여 횡보강근에 작용하는 인장력이 크게 증가한다. 본 연구의 목적은 휨을 받는 부재 내에 정착된 확대머리 철근의 정착성능에 대한 횡보강근의 영향력을 평가하는 것으로, 이를 위해 횡보강근의 간격을 변수로 한 대구경 확대머리 철근의 정착실험을 수행하였다. 실험방법으로는 컷오프 구간을 모사한 실험을 수행하였으며, 확대머리 철근으로는 D43의 대구경 철근을 사용하였다. 실험 결과, 횡보강근이 없는 실험체의 경우 정착구간의 쪼갬파괴에 이어 단부의 하중이 확대머리 부근의 콘크리트에 직접적으로 작용하면서 상부 피복 콘크리트가 부재에서 탈락하는 취성적인 파괴형태가 나타났다. 또한 확대머리 철근의 발현강도가 항복강도의 절반밖에 못 미치는 매우 낮은 내력을 보였다. 이에 반해 횡보강근이 배근된 실험체의 경우 경우 횡보강근이 실험체 단부의 하중에 직접적으로 저항함에 따라 실험체 내력이 큰 폭으로 상승하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1993년도 가을 학술발표회 논문집
• /
• pp.173-178
• /
• 1993

In order to quantify the effect of transverse reinforcement on the bond splitting behavior of reinforcement monotonic loading tests of 8 slmply beams were carried out. The reinforcing details and material properties were so determined that the bond splitting failure proceded the shear and flexural failure. A bond splitting strength derived from the experimental data and it accounts for following parameters: 1) Concrete Strength 2) Transverse reinforcement ratio and shape 3) Thickness of concrete cover 4)Deformation of reinforcement

• Computers and Concrete
• /
• 제18권2호
• /
• pp.165-178
• /
• 2016

The present work is concerned with a numerical investigation of the behaviour of reinforced-concrete beams with non-bonded flexural tension reinforcement. The numerically-established behaviour of such beams with and without transverse reinforcement is compared with its counterpart of similar beams with bonded reinforcement. From the comparison, it is found that the development of bond anywhere within the shear span inevitably leads to inclined cracking which is the cause of 'shear' failure. On the other hand, the lack of bond within the shear span of the beams is found, not only to prevent cracking within the shear span, but, also, to lead to a flexural type of failure preceded by the formation of horizontal splitting of concrete in the compressive zone. It is also found that delaying the extension of horizontal splitting through the provision of transverse reinforcement in the beam mid span can lead to flexural failure after yielding of the tension reinforcement. Yielding of the tension reinforcement before the horizontal splitting of the compressive zone may also be achieved by reducing the amount of the latter reinforcement.