• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.9-14
• /
• 2002

열-기계-전기 하중이 완전 연계된 스마트 구조물의 응력과 변형을 정확히 예측할 수 있는 판 이론을 개발하였다. 두께 방향으로 변위와 온도장은 3차 곡선에 선형 지그재그 장을 중첩하여 구하였다. 횡 수직방향 변형을 고러하기 위해 횡 수직 변위를 두께방향으로, 포물선으로 가정하였다. 전기장은 선형지그재그 형태로 가정하였다. 스마트 구조물의 층에 의존하는 변위장과 온도장의 자유도를 층 사이의 연속조건과, 평판의 위 아래 횡 방향 전단응력이 존재하지 않는다는 조건으로부터, 기준면에 의한 자유도로 나타내었다. 수치 예를 통해 제안된 이론의 정확도와 효율성을 평가하였다. 본 연구에서 제시한 고차 지그재그 이론은 열 환경 하에서 두꺼운 지능 복합재료 평판의 정적, 동적 거동 해석에 사용될 수 있다.

• Composites Research
• /
• 제36권2호
• /
• pp.117-125
• /
• 2023

본 논문에서는 복합소재 적층 구조물의 열-기계적 거동을 효과적으로 예측할 수 있는 8절점 판 요소 기반 전산해석 기법을 제안하고자 한다. 횡방향 수직 변형이 고려된 개선된 일차전단변형이론을 바탕으로 유한요소 정식화를 수행하였으며, 독립적으로 가정되는 변위장 및 응력장 사이의 타당한 수학적 관계식을 도출함으로써 해석 결과의 정확도와 계산 과정의 효율성을 동시에 향상시키고자 하였다. 또한, 횡 방향 변위장의 개선을 통해 횡 방향 수직 변형을 효과적으로 고려함으로써, 복합소재 적층 구조물의 열적 거동 예측 과정에서의 신뢰성을 확보하고자 하였다. 수치 예제로써 열-기계 하중을 받는 2차원 복합소재 적층평판을 고려하였으며, 3차원 탄성해 및 참고문헌에서 활용 가능한 해석 결과와의 비교, 검토를 통해 제안된 유한요소 해석 기법의 성능을 검증하였다.

• Architectural research
• /
• 제7권1호
• /
• pp.39-48
• /
• 2005

Main objective of this research is to evaluate performance of high-strength concrete (HSC) columns for ductility and strength. Eight one-third scale columns with compressive strength of 69 MPa were subjected to a constant axial load corresponding to 30 % of the column axial load capacity and a cyclic horizontal load-inducing reversed bending moment. The variables studied in this research are the volumetric ratio of transverse reinforcement (${\rho}_s=1.58$, 2.25 %), tie configuration (Type H, Type C and Type D) and tie yield strength ($f_{yh}=549$ and 779 MPa). Test results show that the flexural strength of every column exceeds the calculated flexural capacity based on the equivalent concrete stress block used in the current design code. Columns with 42 % higher amounts of transverse reinforcement than that required by seismic provisions of ACI 318-02 showed ductile behaviour, showing a displacement ductility factor (${\mu}_{{\Delta}u}$) of 3.69 to 4.85, and a curvature ductility factor (${\mu}_{{\varphi}u}$) of over 10.0. With an axial load of 30 % of the axial load capacity, it is recommended that the yield strength of transverse reinforcement be held equal to or below 549 MPa.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1340-1347
• /
• 2006

Dynamic response of buried pipelines both in the axial and the transverse directions on concrete pipe and steel pipe, FRP pipe were investigated through a free vibration analysis. End boundary conditions considered herein consist of free ends, fixed ends, and fixed-free ends in the axial and the transverse direction. Guided ends, simply supported ends, and supported-guided ends were added to the transverse direction. The buried pipeline was regarded as a beam on an elastic foundation and the ground displacement of sinusoidal wave was applied to it. Natural frequencies and mode shapes were determined according to end boundary conditions. In addition, the effects of parameters on the natural frequency were evaluated. The natural frequency is affected most significantly by the soil stiffness and the length of the buried pipelines. The natural frequency increases as the soil stiffness increases while it decreases as the length of the buried pipeline increases. Such behavior appears to be dominant in the axial direction rather than in the transverse direction of the buried pipelines.

• Structural Engineering and Mechanics
• /
• 제3권2호
• /
• pp.121-133
• /
• 1995

It is well known that two-dimensional simplified third-order theories satisfy the layer interface continuity of transverse shear strains, thus these theories violate the continuity of transverse shear stresses when two consecutive layers differ either in fibre orientation or material. The third-order theories considered herein involve four/or five dependent unknowns in the displacement field and satisfy the condition of vanishing of transverse shear stresses at the bounding planes of the plate. The objective of this investigation is to examine (i) the flexural response prediction accuracy of these third-order theories compared to exact elasticity solution (ii) the effect of layer interface continuity conditions on the flexural response. To investigate the effect of layer interface continuity conditions, three-dimensional elasticity solutions are developed by enforcing the continuity of different combinations of transverse stresses and/or strains at the layer interfaces. Three dimensional twenty node solid finite element (having three translational displacements as degrees of freedom) without the imposition of any of the conditions on the transverse stresses and strains is also employed for the flexural analysis of the laminated plates for the purposes of comparison with the above theories. These shear deformation theories and elasticity approaches in terms of accuracy, adequacy and applicability are examined through extensive numerical examples.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2008년도 정기 학술대회
• /
• pp.45-48
• /
• 2008

Periodic lattice structures such as the large space lattice structures and carbon nanotubes may take the extension-transverse shear-bending coupled vibrations, which can be well represented by the extended Timoshenko beam theory. In this paper, the spectrally formulated finite element model (simply, spectral element model) has been developed for extended Timoshenko beams and applied to some typical periodic lattice structures such as the armchair carbon nanotube, the periodic plane truss, and the periodic space lattice beam.

• 대한전기학회논문지
• /
• 제38권10호
• /
• pp.811-819
• /
• 1989

An analysis method about Transverse Edge Effect is suggested which can be applied even in transversal decline when the mover of linear induction motor runs along a curvilinear path. The criteria for linear induction motor design is proposed by indentifying the influence of the ratio of width and displacement of primary and secondary.

• East Asian mathematical journal
• /
• 제37권5호
• /
• pp.619-626
• /
• 2021

In [1, 2], we studied the string-like system with time-varying delay. Unlike the string system, the plate system must consider both longitudinal and transverse strains. First, we consider the physical phenomenon of an axially moving plate concerning kinetic energy, potential energy, and work dones. By the energy conservation law in physics, we have a nonlinear plate-like system with internal time delay.

• Steel and Composite Structures
• /
• 제15권2호
• /
• pp.175-202
• /
• 2013

The super convergent laminated composite beam element is newly derived for the lateral stability analysis. For this, a theoretical model of the laminated composite beams is developed based on the first-order shear deformation beam theory. The present laminated beam takes into account the transverse shear and the restrained warping induced shear deformation. The second-order coupling torque resulting from the geometric nonlinearity is rigorously derived. From the principle of minimum total potential energy, the stability equations and force-displacement relationships are derived and the explicit expressions for the displacement parameters are presented by applying the power series expansions of displacement components to simultaneous ordinary differential equations. Finally, the member stiffness matrix is determined using the force-displacement relationships. In order to show accuracy and superiority of the beam element developed by this study, the critical lateral buckling moments for bisymmetric and monosymmetric I-beams are presented and compared with other results available in the literature, the isoparametric beam elements, and shell elements from ABAQUS.

• Journal of Magnetics
• /
• 제15권2호
• /
• pp.64-69
• /
• 2010

This paper describes the development of a novel transverse flux linear motor (TFLM) excited by permanent magnets (PMs). It combines the advantage of two different TFLMs and produces high thrust with reduced normal force. The magnetic field is analyzed by combining the three-dimensional (3D) equivalent magnetic circuit network (EMCN) method with 2D finite element analysis. The experimental findings of the prototype motors are in good agreements with the analysis results, and demonstrate the potential of the proposed motor as a direct drive requiring relatively long displacement of a mover.