• Journal of Dental Rehabilitation and Applied Science
• /
• v.16 no.1
• /
• pp.61-67
• /
• 2000

It was the aim of present study to grope the relationship of the maxillary first molar width to the various transverse skeletal measurements in frontal headfilm, and to formulate the predictive equations of the maxillary intermolar width (U6-U6) from each of the variables. Frontal cephalograms of 17 males from 18 to 26 YO and 13 females from 17 to 25 YO who manifested balanced skeletal profiles, normal occlusion, and no history of orthodontic and prosthodontic treatment were employed as subjects. Nine transverse measurements were scrutinized with Pearson's correlation analysis, simple and stepwise multiple regression analysis in specific regards to the intermolar width of maxillary first molar. Statistical output demonstrated that there were intimate relationships within the various transverse skeletal measurements each other, and among the others, high correlation was found between facial width and maxillary first intermolar width. Regression analyses provided the reliable and clinically applicable predictive equations to set the ideal maxillary first intermolar width(U6-U6) from the given skeletal framework.

• Journal of the Society of Naval Architects of Korea
• /
• v.46 no.3
• /
• pp.279-289
• /
• 2009

For a Product Oil Carrier, longitudinal bulkhead as well as transverse one is corrugated shape in general and intersection part of bulkheads is utilized for a pipe trunk. Since lower and upper stools are to be connected with all of longitudinal and transverse bulkheads, they have a uniform height respectively. The purpose of this study is the development of design system for the minimization of total weight of longitudinal and transverse bulkheads at the initial design stage. In this study, the beam element models for longitudinal and transverse corrugated bulkheads are established and they are applied to the structural analysis. For the practical design, the selection and the position of an additional pipe trunk are considered in this study. In addition the required minimum distance between the bracket installed along the web of corrugation at lower stool and the diaphragm is taken into consideration during optimization process. Evolution strategy(ES) is adopted as an optimization technique.

• Advanced Composite Materials
• /
• v.16 no.2
• /
• pp.151-166
• /
• 2007

High-cycle fatigue characteristics of quasi-isotropic carbon fiber reinforced plastic (CFRP) laminates [-45/0/45/90]s up to $10^8$ cycles were investigated. To assess the fatigue behavior in the high-cycle region, fatigue tests were conducted at a frequency of 100 Hz, since it is difficult to investigate the fatigue characteristics in high-cycle at 5 Hz. Then, the damage behavior of the specimen was observed with a microscope, soft X-ray photography and a 3D ultrasonic inspection system. In this study, to evaluate quantitative characteristics of both transverse crack propagation and delamination growth in the high-cycle region, the energy release rate associated with damage growth in the width direction was calculated. Transverse crack propagation and delamination growth in the width direction were evaluated based on a modified Paris law approach. The results revealed that transverse crack propagation delayed under the test conditions of less than ${\sigma}_{max}/{\sigma}_b$ = 0.3 of the applied stress level.

• Structural Engineering and Mechanics
• /
• v.21 no.6
• /
• pp.635-658
• /
• 2005

The possibility of detecting a crack in L-shaped pipes filled with fluid based on measurement of transverse natural frequencies is examined. The problem is solved by representing the crack by a massless rotational spring, simulating the out-of-plane transverse vibration only without solving the coupled torsional vibration and using the transfer matrix method for solution of the governing equation. The theoretical solutions are verified by experiments. The cracks considered are external, circumferentially oriented and have straight front. Pipes made of aluminium and mild steel are tested with water as internal fluid. Crack size to pipe thickness ratio ranging from 0.20 to 0.57 and fluid (gauge) pressure in the range of 0 to 10 atmospheres are examined. The rotational spring stiffness is obtained by an inverse vibration analysis and deflection method. The details of the two methods are given. The results by the two methods are presented graphically and show good agreement. Crack locations are also determined by the inverse analysis. The maximum absolute error in the location is 13.80%. Experimentally determined variation of rotational spring stiffness with ratio of crack size to thickness is utilized to predict the crack sizes. The maximum absolute errors in prediction of crack size are 17.24% and 16.90% for aluminium and mild steel pipes respectively.

• Wind and Structures
• /
• v.6 no.1
• /
• pp.53-70
• /
• 2003

Tsing Ma Bridge in Hong Kong is the longest suspension bridge in the world carrying both highway and railway. It has two H-shape concrete towers, each of which is composed of two reinforced concrete legs and four deep transverse prestressed concrete beams. A series of wind tunnel tests have been performed to measure the aerodynamic coefficients of the tower legs and transverse beams in various arrangements. A 1:100 scaled 3D rigid model of the full bridge tower assembled from various tower components has been constructed for different test cases. The aerodynamic coefficients of the lower and upper segments of the windward and leeward tower legs and those of the transverse beams at different levels, with and without the dummy bridge deck model, were measured as a function of yaw wind angle. The effects of wind interference among the tower components and the influence of the bridge deck on the tower aerodynamic coefficients were also investigated. The results achieved can be used as the pertinent data for the comparison of the computed and field-measured fully coupled buffeting responses of the entire bridge under yaw winds.

• Earthquakes and Structures
• /
• v.7 no.5
• /
• pp.779-796
• /
• 2014

This experimental investigation was conducted to examine the behavior and response of high-strength material (HSM) reinforced concrete (RC) columns under combined high-axial and cyclic-increasing lateral loads. All the columns use high-strength concrete ($f_c{^{\prime}}$=100MPa) and high-yield strength steel ($f_y$=685MPa and $f_y$=785MPa) for both longitudinal and transverse reinforcements. A total of four full-scale HSM columns with amount of transverse reinforcement equal to 100% more than that required by earthquake resistant design provisions of ACI-318 were tested. The key differences among those four columns are the spacing and configuration of transverse reinforcements. Two different constant axial loads, i.e. 60% and 30% of column axial load capacity, were combined with cyclically-increasing lateral loads to impose reversed curvatures in the columns. Test results show that columns under 30% of axial load capacity behaved much more ductile and had higher lateral deformational capacity compared to columns under the 60% of axial load capacity. The columns using closer transverse reinforcement spacing have slightly higher ductility than columns with larger spacing.

• Structural Engineering and Mechanics
• /
• v.74 no.1
• /
• pp.83-90
• /
• 2020

Several classical and higher order plate theories were used to study the buckling of functionally graded material (FGM) plates. In the great majority of research, a power function is used to represent metal and ceramic material transverse distribution (P-FGM). Therefore, the effect of having other transverse variation of material properties on the buckling behavior of thick rectangular FGM plates was not properly addressed. In the present work, this effect is investigated using the Third order Shear Deformable Theory (TSDT) for the case of simply supported FGM plate. Both a sigmoid function and an exponential functions are used to represent the transverse gradual property variation. The plate governing equations are combined with a Navier type expanded solution of the unknown displacements to derive the buckling equation in terms of the pre-buckling in-plane loads. Finally, the critical in-plane load is calculated for the different buckling modes. The model is verified by a comparison of the calculated buckling loads with available published results of Al-SiC P-FGM plates. The conducted parametric study shows that manufacturing FGM plates with sigmoid variation of properties in the thickness direction increases the buckling load considerably. This improvement is found to be more significant for the case of thick plates than that of thin plates. Results also show that this stiffening-like effect of the sigmoid function profile is more evident for cases where the in-plane loads are applied along the shorter edge of the plate.

• Journal of Chest Surgery
• /
• v.16 no.3
• /
• pp.331-336
• /
• 1983

Cor triatriatum is a rare congenital malformation of the heart, in which a septum stretches in a transverse or oblique plane through the left atrium, thus separating it into two compartments. The upper one connects with the pulmonary veins, and the lower one connects with the left ventricle. Due to the rarity of, and great difficulty in-diagnosing, cor trlatrlatum, data On the surgery of this disease are of necessity very limited and so accurate pre-operative diagnosis was very difficult to make. `We experienced a case of the cyanotic congenital heart disease which was diagnosed as a large atrlal septal defect with streaming venous blood from inferior vena cava to left atrium through atrial septal defect in August, 1982. We found that there were transverse septum in the left atrium through atrlal septal defect, the pulmonary venous drainage were located in the upper chamber of the left atrium, and the lower chamber was connected with the left atrial appendage, mitral valve and `left ventricle. But our case had not any opening in this transverse septum and the right atrium was connected with the upper chamber of the left atrium through the upper part of the atrlal septal defect, and was communicated with the lower chamber of the left atrium through the lower part of the atrlal septal defect. We excised the transverse septum and repair this atrial septal defect with Woven Dacron patch accompanying with the drainage of coronary sinus to right atrium. The post-operative course was not eventful and he was discharged with good result on the post-operative 8th day, and has been in good .condition up to now for longer than 10 months.

• Journal of Welding and Joining
• /
• v.23 no.5
• /
• pp.20-24
• /
• 2005

Due to the difficulties associated with the supply of steel plates, hot rolled coil (Steel grade: SM490A) is considered fur structural materials in replace of the existing SWS50A-M1. However, it is found that SM490A exhibits a significant anisotropy in terms of impact energy with respect to transverse and longitudinal directions. In this study, an experimental investigation is carried out to examine the relationship between the anisotropy in impact values and the fatigue strengths of SM490A with respect to the rolling direction of test specimens. All test specimens failed around 1,500,000 cycles regardless of the test specimen direction. Therefore, it is found that the anisotropy in impact energy is not related to the fatigue strength of the materials considered in this study. However, the transverse direction specimen showed more rapid brittle fracture mode compared to that of longitudinal direction specimen, and this appears to be related to the lower impact values in transverse direction.

• Journal of Advanced Marine Engineering and Technology
• /
• v.7 no.1
• /
• pp.49-63
• /
• 1983

Coupled transverse shaft vibrations have become the target of great concern in high powered ships such as container ships. Due to increasing ship's dimensions and high propulsive power, resonance frequencies of the propeller shaft system tend to decrease and can appear in some cases within the operating speed range of engine. In this connection, the coupled free transverse vibrations of shaft system in two planes are theoretically investigated. This shaft system carries a number of discs and is flexibly supported by a number of bearing stiffness are considered for the calculation. Transfer matrix method is applied to calculate the shaft responses in both planes. A digital computer program is developed to calculate the shaft responses of the coupled transverse vibrations in two planes. An experimental model shaft system is made. It is composed of a disc, shafts, ball bearings thrust bearings and flexible bearing supports. The shaft system is excited by an electrical magnet, and shaft vibration responses in two planes are measured with the strain gage system. From these measurements, the natural frequencies of the shaft system in both planes are found out. The developed program is also used to calculate the shaft vibration responses of experimental model shaft system. From the results of these calculations, the natural frequencies of shaft system in two planes are derived. Theoretical predictions of model shaft natural frequencies show good agreements with its esperimental measurements.