• Journal of The Korean Society of Agricultural Engineers
• /
• v.61 no.1
• /
• pp.85-93
• /
• 2019

The objective of this study is to assess the environmental effect of the reclaimed land drainage method using oyster shell through the Life cycle $CO_2$ assessment, and to evaluate the applicability in South Korea. In this Study, the life cycle $CO_2$ emissions of oyster shell (OS) and crushed stone (CS, as avoided product) were assessed and compared. The Life Cycle Assessment method was used for quantitative evaluation of direct or indirect environmental effects of OS recycling. $CO_2$ was selected as the evaluation target material, and the scope of assessment includes the acquisition of materials, processing, transportation, construction phases. Compared to using CS, 77.0% of $CO_2$ emissions in acquisition and processing, 47.0% in transportation and 6.5% in construction phase were reduced, respectively by using of OS. The maximum transportation distance of OS was estimated according to transportation distance of CS. OS has environmental advantages than CS within about 26 - 101 km from the source. OS was found to be applicable to reclaimed lands up to 810 ha, 3,910 ha from Tongyeong and Yeosu, respectively. In addition, the amount of OS that could be used as drainage material for reclaimed land was much higher than annual OS production of South Korea. Therefore, it is considered that OS is sufficient to be used as drainage material for reclaimed land in South Korea.

• Journal of Neurocritical Care
• /
• v.11 no.2
• /
• pp.86-92
• /
• 2018

Background: A delay of transfer for patients with acute stroke needing emergent revascularization is a huge hurdle for efficacy of revascularization. The objective of this study was to investigate changes of transportation time calculated by image to door (ITD) time (from checking brain images at first contact hospital to arriving at our emergency center) before and after 2015. Methods: This study was performed in a retrospective manner from 2013 into 2017. Acute ischemic stroke (AIS) patients having intravenous thrombolysis and/or mechanical thrombectomy during the observation period were enrolled. Among them, those who had revascularization under 'Drip-and-Ship' or 'Ship-and-Drip' paradigm were selected. Results: During the observation period, 225 patients were treated under 'Drip-and-Ship' or 'Ship-and-Drip' paradigm. Twenty-three were excluded due the lack of detailed data. Among 202 patients, 73 and 129 were treated under Drip-and-Ship and Ship-and-Drip paradigms, respectively. In 2013, 35 patients from 18 hospitals (median distance, 25 km) were transferred to our regional stroke center and their median ITD time was 116 minutes. It was gradually decreased after 2015. In 2017, ITD time was significantly (P<0.01) shortened to 85 minutes without significant changes in transfer distance. The median onset to puncture time was also significantly (P=0.03) decreased from 365 minutes in 2013 to 270 minutes in 2017. Conclusion: Our results implicate that many hospitals in our stroke region might have recognized the importance of rapid transportation for AIS after 2015.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.7
• /
• pp.161-168
• /
• 2009

In this paper, we studied about an consolidated transportation model to transport EOL (end-of-life) electronic household appliances for recycling in South Korea. The objective is to minimize the total traveling distance of the vehicles transporting EOL electronic household appliances collected by local authorities and major manufacturers' distribution centers to assigned R/C(recycling center) in South Korea. Current reverse logistics for recycling EOL electronic household appliances is operated by local authorities and major manufacturers individually, and it is inefficient for the following reasons: excessive traveling distance, transportation cost, low truck capacity utilization, and so on. The presented model is developed to solve this problem. We apply a integer programming to solve this problem and present computational results using actual field data.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.187-197
• /
• 2008

While driving a highway, A driver gets lots of information through geometrical structure, traffic situation, signs on the road. He gets most of the information by visual sense. Acceleration or deceleration and driving direction depend on sight distance. Therefore, it's essential to secure a driver's sight distance for a safe drive. However, design guides of geometrical structure and sight distance suggest respective standards of horizontal and vertical alignment. They do not indicate quantitative standard of combined alignment. Currently, element separated on a two-dimensional projected plane are available, but they do not guarantee safe and pleasant design. I will use the existent model analysing three-dimensional sight distance through mathematical calculation and sort a variety of geometrical structure element and type. In these researches, we will look at how much three-dimensional sight distance is overestimated or underestimated compared to two-dimensional. I will develop a program which predicts traffic velocity on the curvature of two-lane provincial road. stopped sight distance and three-dimensional sight distance will be compared at a predicted drive velocity. I will suggest the way to evaluate road consistency.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.3
• /
• pp.52-61
• /
• 2020

This study developed a legibility distance(LD) model for three colors used in VMS according to luminance under foggy conditions through experiments. For this, a simulated environment was created, and LD values of red, green, and yellow color were collected by increasing the luminance. From the test results, the LDs for red at luminance levels of 2,000 cd/㎡ and 20,000 cd/㎡ and a visibility distance of 10m were 10.2m and 18.8m, respectively, which was an improvement of 84%. The LD was improved by 34% and 17% at a visibility distance of 20 m and 30 m, respectively. For green, the LD was improved by 69%, 63%, and 19% at visibility distance of 10m, 20m, 30m, respectively. For yellow, the LD was improved by 100%, 47%, and 36% at visibility distance of 10m, 20m, 30m, respectively. The LD models for three colors were developed by using two independent variables, luminance value and visibility distance. The adjusted coefficients of the red, green, and yellow model equations were calculated as 0.982, 0.978, and 0.915, respectively, and the explanatory power of all models was very high.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.11
• /
• pp.1582-1587
• /
• 2014

In this paper, we perform a modeling for the AT Feeder system in AC electric railway and we utilize the power EMTDC program to implement about AT feeder system modeling. In addition, we study the impedance characteristics of the AT feeder system and calculated fault current and impedance according to the distance due to fault accident. Based on it's result, fault current are compared between calculating the value and simulation value in EMTDC modeling. Impedance of power system is Largest at the middle point of the system and is smallest near autotransformer, and then showed that the fault current is inversely proportional to impedance characteristics.

• Journal of Korean Institute of Industrial Engineers
• /
• v.42 no.4
• /
• pp.296-303
• /
• 2016

In public transportation, smart cards have been introduced for the purpose of convenient payment systems. The smart card transaction data can be utilized not only for the exact and convenient payment but also for civil planning based on travel tracking of citizens. This paper focuses on the analysis of the transportation convenience using the smart card big data. To this end, a new index is developed to measure the transit convenience of each region by considering how passengers actually experience the transportation network in their travels. The movement data such as movement distance, time and amount between regions are utilized to access the public transportation convenience of each region. A smart card data of five working days in March is used to evaluate the transit convenience of each region in Seoul city. The contribution of this study is that a new transit convenience measure was developed based on the reality data. It is expected that this measure can be used as a means of quantitative analysis in civil planning such as a traffic policy or local policy.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.9 no.4
• /
• pp.366-372
• /
• 2016

This paper advances the software, hardware and mechanical design that the visually impaired can recognize the position and distance of the obstacle while walking. The first software implementation is proposed a method to implement the algorithm graph for the ratio of the distance measuring ultrasonic sensors for voltage. And it was extracted by the precise distance measuring parameter values from simulation to measure the precise distance. Second hardware implementation was designed to be able to detect obstacles in a relatively simple sensor-based walking aid for the visually impaired. In addition, using the switching regulator IC of high performance it was designed to be used to boost the Li-ion battery 3.7V to 5V. The third mechanism was developed by analyzing the sensor angle and the cane angle.

• Journal of Korean Society of Transportation
• /
• v.24 no.1 s.87
• /
• pp.121-131
• /
• 2006

Considering characteristics of drivers and vehicles with proper and reliable ways in highway design Procedures can ensure high level of highway safety. However, it is almost impossible to take into account all factors of drivers and vehicles influencing on the highway safety because of their uncertain and random nature. To detour the dead-end, the nature are usually assumed as simple homogeneous and deterministic one. Although the restricted assumption makes the system simple, it can produce serious problems due to lack of considering variability in the system. This paper develops a reliability-based method for determining stopping sight distance(SSD) and intersection sight distance (ISD), which are crucial elements in highway alignment design. In the study, Hasofer-Lind method is adopted. which is a well-known first-order second moment reliability method (AFOSM) The results in this study show that if mean, variance, and distribution of a particular driver-vehicle parameter are known, more reliable sight distances can be applied in highway design procedures because we can reflect uncertainties and randomness. Thus, the Probabilistic method could be adopted in designing the sight distance(s) with the desired reliability level.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.51 no.3
• /
• pp.333-339
• /
• 2015

Fish exportation using airplanes incurs sizable logistics costs (12,000KRW/kg), according for more than 45% out of the total export cost. Thus, it is unreasonable to quantitatively expand fish exportation by means of air transport. In addition, cases of failing to deliver fish at the right time to the right place occurs frequently due to the limited cargo capacity and insufficient cargo space of airplanes, especially during the peak season. Therefor, a technology that not only minimizes the logistics costs but also transports fish freshly and safely, in the case of long distance exportation to countries such as the United States and Taiwan, should be developed. In this study, a live fish container control system for long distance transportation was designed and implemented. Live flatfish (2,000kg) were selected as the target fish, were transported to the United States to analyze and verify the performance of the a live fish container control ystem and transportation ability.