• Journal of Korea Water Resources Association
• /
• v.48 no.12
• /
• pp.1065-1075
• /
• 2015

In the estuary where the structure such as river-mouth weir has been installed, the flow is developed very complicatedly due to river water from upstream, tide of the sea and floodgate operation. Especially, if basin outlets more than one exists in one estuary, the boundary conditions will be significantly more complex form. Saemangeum(SMG) project area in Korea is the most typical example. There are Mankyung river and Dongjin river in upstream. The water of them inflows into SMG project area. In the downstream, river flow was drained from inland to sea over the SMG sea dike through the sluice. The connecting channel was located between Mankyung and Dongjin basins. It functions not only as transportation by ship in ordinary period but also as flood sharing by sending flood flow to each other in flood period. Therefore, in order to secure the safety against flood, it is very important to understand the flood sharing capacity for connecting channel. In this study, the flood control effect was analyzed using numerical simulation. Delft3D was used to numerical simulation and simulated period was set up with neap tide, in which the maximum flood stage occurred due to poor drainage. Actually, three connecting channels were designed in land use plan of the SMG Master Plan, but they were simplified to a single channel for conciseness of analysis in this study. According to the results of numerical analysis, the water level difference between two basins was increased and the maximum flood stage at dike sluice was also upraised depending on decrease of conveyance. And the velocity induced by same water level difference was decreased when the conveyance became smaller. In certain conveyance above, there was almost no flood control effect. Therefore, if the results of this study are considered for design of connecting channel, it will be expected to draw the optimal conveyance for minimizing dredging construction cost while maximizing the flood control effect.

• Restorative Dentistry and Endodontics
• /
• v.32 no.6
• /
• pp.530-541
• /
• 2007

Currently, various Nickel-Titanium rotary files are used in endodontic treatment, but there is no one perfect system that can be applied to any clinical situation. Therefore, the combined uses of various file systems which can emphasize the advantages of each system are introduced as hybrid instrumentation. The ProTaper system is efficient in body shaping and apical pre-enlargement but is reported to have more possibility of transportation and produce more aberrations and deformation in more or less severe curved canals. Recently, new ProTaper system(ProTaper Universal) with different configuration and cross-sectional design to overcome the week points of ProTaper have been marketed. The purpose of this study was to compare and evaluate the shaping abilities of ProTaper, ProTaper Universal system, and two hybrid methods using S-series of ProTaper Universal and Hero Shaper or ProFile. The time lapses for instrumentation were measured and the used files were inspected for distortion. The pre- and post-instrumented root canals were scanned and superimposed to evaluate the aberrations and reduction of root canal curvature and change of radius of canal curvature. The increased canal width and apical centering ratio were calculated at 1, 2, 3, 4 and 5 mm levels from apical foramen. Under the conditions of this study, the ProTaper Universal seems to have better shaping ability than ProTaper in terms of instrumented width and instrumentation time. It may be suggested that the ProTaper Universal system is efficient as much as hybrid instrumentation using ProTaper and other constant-tapered NiTi file systems in highly experienced operators.

• KDI Journal of Economic Policy
• /
• v.30 no.2
• /
• pp.129-155
• /
• 2008

The rate of antibiotics prescription for an acute airway infection significantly varies depending upon the diagnosis type, specialty, and the location of the hospital along with many other related factors. The objective of this study is to empirically investigate the possible relationship between the antibiotics prescription rates for an acute airway infection and the degree of competition in the hospital market regions of mainly the providers of primary medical care services such as clinics, internal medicines, pediatrics and otorhinolaryngology department. Using the data from Health Insurance Review and Assessment Service (HIRA) regarding the hospitals' antibiotics prescription rates for the acute airway infection and controlling for selected variables of demand and supply sectors, this study tries to figure out that the degree of competition in the hospital market, regardless of what type of competition indexes we employed, has a statistically significant effect on the variations of antibiotics prescription rate of the clinics in local areas. This result implies that as an economic consideration itself, the change in the degree of competition in the hospital market can play a crucial role influencing the treatment behaviors of the medical doctors. More specifically, this study reveals that as the degree of competition increases the antibiotics prescription rate goes up. This result means that if the market becomes more competitive in a specific region so that it might cause a reduction in doctor's income, doctors with rational decision-making process, recognize that the benefit created from inducing patients' seemingly unnecessary demand for medical care (income effect) would be higher than the costs associated with sustaining their targeted income (substitution effect). It is because that the doctors are more likely to prescribe antibiotics which create relatively higher margins than other medical care services in order to sustain their targeted income when the hospital market competition becomes tighter. Even though this study empirically confirms that antibiotics prescription can be affected by the economic incentives, it still raises following issues as limitations of the study: first issue is about the representativeness of the hospital regions segregated for this study, which might be weak in explaining whether these regions are mutually exclusive in reality. Patients actually consider the quality of services, transportation cost, time costs, and any other related factors choosing the doctors or hospitals, and in that sense, this study rules out 'border-crossing' in using the medical care services. Second issue arises in capturing the data of antibiotics prescription rate. Since we use the average rate for each medical institution, we cannot figure out the average rate for each patient so that we are not able to control for the variation of patients' medical conditions. It is because of the unavailability of data regarding each patient's medical condition from HIRA. Thirdly, since this study mainly analyzes the medical institutions providing primary care such as clinics, internal medicines, pediatrics, and otorhinolaryngology department, it is skeptical of whether those institutions can represent the hospital market in respective regions and truly reflect the degree of competition. It needs to extend the study areas and disease types as well as any micro data for future studies.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Food Science and Preservation
• /
• v.24 no.6
• /
• pp.734-745
• /
• 2017

The effects of combination treatment with sulfur dioxide generating pad ($SO_2$ pad) and modified atmosphere packaging (MAP) on grape quality were examined under simulated exporting condition and actual export to Los Angeles, USA. The 'Campbell Early' grape harvested in Hwaseong, Gyeonggi was precooled at $0^{\circ}C$, selected and packaged at $10^{\circ}C$, and stored at $0^{\circ}C$ for 30 days. The treatment was as follows: general export packaging (control), only $SO_2$ pad, combination of $SO_2$ pad and MAP (perforated polyethylene film, $SO_2$ pad+MA). In case of control and only $SO_2$ pad under simulated exporting condition, the grape quality changes with storage time were decrease in hardness and brush length, increase in stem browning, and increased in shattering rate. The treatment of $SO_2$ pad+MA was the most effective in preserving the grape quality since $SO_2$ concentration inside the package remained around 2.9 ppm by MA film. Grape exports from harvest to local distribution of the USA took 30 days, and only $SO_2$ pad+MA package showed no fungus, maintained brush length and rachis color, and was lowest at 4.0% of shattering rate since the concentration of $SO_2$ in the package was about 4.0 ppm. As a result, it was considered that the combination of $SO_2$ pad and MA was the most effective way to maintain freshness of grape during long-term marine transportation and extend the shelf-life in exporting countries.

• Journal of Animal Environmental Science
• /
• v.16 no.1
• /
• pp.1-12
• /
• 2010

This survey was conducted to investigate the status and strategy of swine manure utilization of 109 swine farms in the Gyeongnam, Korea. The personal properties of owner, types of swine buildings, facilities and equipment for manure management, conditions for manure recycling and farming for recycling resources were surveyed. Age of farm owners were occupied as 44.1% for 50s followed by the 60s with one-forth and 40s with 22.9%. Educational background of farm owners, a high school graduate makes up the largest proportion of farm owners followed by a college graduation with 35.8%. The swine manure collection methods were occupied as 34.9% with totally slurry system and more than 50% slurry system with 34.9% of farms. The manure management cost per ton were occupied as more than two-third with 10,000 won~15,000 won. The cost will pay for manure management, 10,000 won~15,000 won per ton makes up the largest proportion of farm owners. Separator, loader and vehicle to collection, transportation of liquid manure were occupied as 72.5%, 44% and 10.1%, respectively. Recognition of the farming for recycling resources were occupied as 37.6%, however, 25.8% of swine farm owners don't know that. More than sixty percent of swine farms will take a recycling system according to the farming for recycling resources. Conclusively, we have a suggestion in order to promotion of the farming for recycling resources in the Gyeongnam with increasing the portion of recycling of swine manure in each county and revitalizing the marketing of the liquid and solid swine manure fertilizers.

• Journal of the Korean Society of Child Welfare
• /
• no.56
• /
• pp.133-164
• /
• 2016

This study investigated the effect of housing poverty in childhood on adolescents' subjective well-being. Specifically, this study examined whether the major factors that have been known to affect adolescents' well-being (i.e., family relationships, peer relationships, school adjustment etc.) mediated the relationship between housing poverty and adolescents' well-being. And then this study aimed to present an empirical evidence for establishing policies against housing poverty in order to enhance adolescent's subjective happiness. Data were derived from the $1^{st}$, $4^{th}$, and $7^{th}$ surveys of the Korea Welfare Panel Study(KOWEPS), and the sample included. 512 high school children in the $7^{th}$ survey. This study utilized structural equation modeling. Housing poverty was measured by the sub-minimum standard housing condition and the household's burden of housing expenditure. Family relationship, as a mediator, was measured by parental involvement in education, parental monitoring, and family conflicts. Another mediator, school adjustment was measured by school environment and school bonding, and the last mediator, peer relationship was measured by friend attachment and peer attachment. The results showed that housing poverty had significant negative effects on the adolescents' subjective well-being. The sub-minimum standard housing condition with inadequate size and facilities negatively affected adolescents' relationships with family directly and subjective well-being indirectly. In addition, the negative family relationships due to the sub-minimum standard housing condition negatively affected adolescents' subjective well-being through school adjustment and peer relationships. The greater the proportion of income a household spends on housing expenditure, the less likely for adolescents to report positive well-being. The sub-minimum standard housing condition had indirect effects through family relationships, whereas the household's housing expenditure directly affected adolescents' subjective well-being. This study suggested the necessity of interventions to alleviate housing poverty for adolescents' families and lays the groundwork for housing poverty policies in Korea.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.16 no.12
• /
• pp.1234-1268
• /
• 2004

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2002 and 2003 has been carried out. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment/design. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation in diverse facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat transfer, humidity was also interesting to promote comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing research topics. Well developed CFD technologies were widely applied for analysis and design of various facilities and their systems. (2) Heat transfer characteristics of enhanced finned tube heat exchangers and heat sinks were extensively investigated. Experimental studies on the boiling heat transfer, vortex generators, fluidized bed heat exchangers, and frosting and defrosting characteristics were also conducted. In addition, the numerical simulations on various heat exchangers were performed and reported to show heat transfer characteristics and performance of the heat exchanger. (3) A review of the recent studies shows that the performance analysis of heat pump have been made by various simulations and experiments. Progresses have been made specifically on the multi-type heat pump systems and other heat pump systems in which exhaust energy is utilized. The performance characteristics of heat pipe have been studied numerically and experimentally, which proves the validity of the developed simulation programs. The effect of various factors on the heat pipe performance has also been examined. Studies of the ice storage system have been focused on the operational characteristics of the system and on the basics of thermal storage materials. Researches into the phase change have been carried out steadily. Several papers deal with the cycle analysis of a few thermodynamic systems which are very useful in the field of air-conditioning and refrigeration. (4) Recent studies on refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement when new alternative refrigerants are applied. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and new alternative refrigerants including natural refrigerants. Efficiency of various compressors and performance of new expansion devices are also dealt with for better design of refrigeration/air conditioning system. In addition to the studies related with thermophysical properties of refrigerant mixtures, studies on new refrigerants are also carried out. It should be noted that the researches on two-phase flow are constantly carried out. (5) A review of the recent studies on absorption refrigeration system indicates that heat and mass transfer enhancement is the key factor in improving the system performance. Various experiments have been carried out and diverse simulation models have been presented. Study on the small scale absorption refrigeration system draws a new attention. Cooling tower was also the research object in the respect of enhancement its efficiency, and performance analysis and optimization was carried out. (6) Based on a review of recent studies on indoor thermal environment and building service systems, it is noticed that research issues have mainly focused on several innovative systems such as personal environmental modules, air-barrier type perimeterless system with UFAC, radiant floor cooling system, etc. New approaches are highlighted for improving indoor environmental conditions and minimizing energy consumption, various activities of building energy management and cost-benefit analysis for economic evaluation.

• Journal of Bio-Environment Control
• /
• v.30 no.4
• /
• pp.448-454
• /
• 2021

This study was conducted to the effect of low air temperature and light intensity conditions on yield and quality of tomato at the early stage of growth in Korea. Inplastic greenhouses, low temperature and low temperature with shade treatments were performed from 17 to 42 days after plant. Tomato growing degree days were decreased 5.5% due to cold treatment during the treatment period. Light intensity decreased 74.7% of growing degree days due to shade. After commencing treatments, the plant growth decreased by low temperature and low radiation except for height. Analysis of the yield showed that the first harvest date was the same, but the yield of the control was 3.3 times higher than low temperature with shade treatment. The cumulative yields at 87 days after transplanting were 1734, 1131, and 854 g per plant for control, low temperature, and low temperature with shade, respectively. The sugar and acidity of tomatoes did not differ between treatment and harvesting season. To investigate the photosynthetic characteristics according to the treatment, the carbon dioxide reaction curve was analyzed using the biochemical model of the photosynthetic rate. The results showed that the maximum photosynthetic rate, J (electric transportation rate), TPU (triose phosphate utilization), and R_d (dark respiration rate) did not show any difference with temperature, but were reduced by shading. Vcmax (maximum carboxylation rate) was decreased depending on the low temperature and the shade. Results indicated that low temperature and light intensity at the early growth stage can be inhibited the growth in the early stage but this phenomenon might be recovered afterward. The yield was reduced by low temperature and low intensity and there was no difference in quality.

• Korean Journal of Heritage: History & Science
• /
• v.46 no.1
• /
• pp.290-317
• /
• 2013

The objectives of this study are to investigate the natural heritage and scientific value of various geosites on Udo Island, and to evaluate the sites as natural monuments and as world natural heritage properties. Udo Island includes a variety of geoheritage sites. Various land forms formed during the formation of the Someori Oreum formed by phreatomagmatic eruptions. The essential elements for the formation of Udo Island are the tuff cone, overflowing lava and overlying redeposited tuff sediments. Various coastal land forms are also present. About 6,000 years B.C., when sea-level rose close to its present level due to deglaciation since the Last Glacial Maximum, carbonate sediments have been formed and deposited in shallow marine environment surrounding Udo Island. In particular, the very shallow broad shelf between Udo Island and Jeju Island, less than 20 m in water depth, has provided perfect conditions for the formation of rhodoids. Significant amounts of rhodoids are now forming in this area. Occasional transport of these rhodoids by typhoons has produced unique beach deposits which are entirely composed of rhodoids. Additional features are the Hagosudong Beach with its white carbonate sands, the Geommeole Beach with its black tuffaceous sands and Tolkani Beach with its basalt cobbles and boulders. Near Hagosudong Beach, wind-blown sands in the past produced carbonate sand dunes. On the northern part of the island, special carbonate sediments are present, due to their formation by composite processes such as beach-forming process and transportation by typhoons. The development of several sea caves is another feature of Udo Island, formed by waves and typhoon erosion within tuffaceous sedimentary rocks. In particular, one sea cave found at a depth of 10 m is very special because it indicates past sea-level fluctuations. Shell mounds in Udo Island may well represent the mixed heritage feature on this island. The most valuable geoheritage sites investigated around Udo Isalnd are rhodoid depostis on beaches and in shallow seas, and Someori Oreum composed of volcanoclastic deposits and basalt lava. Beach and shallow marine sediments, composed only of rhodoids, appear to be very rare in the world. Also, the natural heritage value of the Someori Oreum is outstanding, together with other phreatomagmatic tuff cones such as Suwolbong, Songaksan and Yongmeori. Consequently, the rhodoid deposits and the Someori Oreum are worth being nominated for UNESCO World Natural Heritage status. The designation of Someori Oreum as a Natural Monument should be a prerequisite for this procedure.