• 정보처리학회논문지C
• /
• 제14C권7호
• /
• pp.559-570
• /
• 2007

본 논문에서는 NSIS(Next Step in Signaling) 시그널링 프로토콜을 기반으로 VPN(Virtual Private Network) QoS(Quality of Service) 서비스 모델인 Hose 모델 자원 준비(Resource Provisioning) 메커니즘에 따라 자원을 예약하고 관리하는 Hose-NSIS-QoSM을 제안한다. 구체적으로 Hose-NSIS-QoSM을 위한 NSIS 메시지 객체(Objects), QoS NSLP(NSIS Signaling Layer Protocol)/NTLP(NSIS Transport Layer Protocol)/RMF(Resource Management Function) 상태 테이블, NSIS 노드에서의 메시지 처리 과정을 정의하였다. 또한, MPLS 네트워크에서의 VPN의 Hose 기반 QoS 서비스 모델을 지원하기 위해 확장된 RSVP-TE(Resource Reservation Protocol-Traffic Engineering)를 이용하는 시그널링 방안인 Hose-RSVP-TE-QoSM과 본 논문에서 제안하는 방안인 Hose-NSIS-QoSM를 비교하였다.

• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1847-1861
• /
• 2020

A design study was performed to improve the limit aseismic performance (LSP) of a primary heat transport system (PHTS) pump. This pump is part of the primary equipment of a prototype generation IV sodium-cooled fast reactor (PGSFR). The LSP is the maximum allowable seismic load that still ensures structural integrity. To calculate the LSP of the PHTS pump, a structural analysis model of the pump was developed and its dynamic characteristics were obtained by modal analysis. The floor response spectrum (FRS) initiated from a safety shutdown earthquake (SSE), 0.3 g, was applied to the support points of the PHTS pump, and then the seismic induced stresses were calculated. The structural integrity was evaluated according to the ASME code, and the LSP of the PHTS pump was calculated from the evaluation results. Based on the results of the modal analysis and LSP of the PHTS pump, design parameters affecting the LSP were selected. Then, ways to improve the LSP were proposed from sensitivity analysis of the selected design variables.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 춘계학술대회 논문집 전기설비전문위원
• /
• pp.195-197
• /
• 2009

It is a proven fact with the opening of the Seoul metro line number 1 in 1974 traffic congestion on the roads has decreased and the efficiency of people transportation in general has greatly been enhanced in the downtown and surrounding areas of Seoul. Even today construction of new subway lines are under way and many more are being planned due to the easy access to stations, short waiting and average travel times, compared with personal vehicles, contributing to the efficiency of the public transportation systems that are linking the downtown areas and also the intercity systems in moving passengers during rush hour and times of special event. Since the labour costs of the train operator in any large city based subway system accounts for a major part of the operating costs per kilometer and to ensure cost efficient operations, especially during non-peak hours, it is necessary to implement an unmanned(auto-driven) subway system. In order to implement such a system it is imperative that the on-board and wayside signalling control systems be fully automated as well. Only through proper examination of safety procedures not only by the AUGT(Automated Urban Guided Transport)system but also by ail the international standards organizations involved can safely and stability be ensured.

• Wind and Structures
• /
• 제19권5호
• /
• pp.523-540
• /
• 2014

This paper presents a comprehensive study of pressure developed on different faces of a 'Y' plan shape tall building using both numerical and experimental means. The experiment has been conducted in boundary layer wind tunnel located at Indian Institute of Technology Roorkee, India for flow condition corresponding to terrain category II of IS:875 (Part 3) - 1987, at a mean wind velocity of 10 m/s. Numerical study has been carried out under similar condition using computational fluid dynamics (CFD) package of ANSYS, namely ANSYS CFX. Two turbulence models, viz., $k-{\varepsilon}$ and Shear Stress Transport (SST) have been used. Good conformity among the numerical and experimental results have been observed with SST model yielding results of higher magnitude. Peculiar pressure distribution on certain faces has been observed due to interference effect. Furthermore, flow pattern around the model has also been studied to explain the phenomenon occurring around the model.

• 한국CDE학회논문집
• /
• 제10권1호
• /
• pp.40-48
• /
• 2005

A hydraulic hose is an important part of the hydraulic system which transmits power using pressurized fluids. It allows relative motion between components at each end of the hose assembly, and it is much easier to route a hose assembly than it is to bend and install a rigid tubing assembly. Unnecessary loads, which drop the hose's pressure capability and shorten service life, depend on a hose-routing. Therefore, the Hydraulic system designers must be aware to consider unnecessary load does not affect the here. For this consideration in an early stage of the design process, CAD system must support the hose assembly routing design function which is to generate routing path and design fitting angle properly. This paper proposes 2 methods. One is to generate curves that are similar to routing paths of the real hose assembly using the energy minimization method and the optimization method. The other is to design fitting angles that are important design elements of a hose assembly using the Parallel Transport Frame. To implement the proposed methods above, commercial CAD software, CATIA has been integrated with our program.

• 한국ITS학회 논문지
• /
• 제15권4호
• /
• pp.153-160
• /
• 2016

영상취득 장치를 이용한 지능화된 감시 장치의 개발 기술 또한 발전하고 있다. 비교적 고속으로 움직이는 객체를 탐지해야 하는 분야에서 무엇보다 중요한 것은 배경영상 갱신에 대한 부하를 효과적으로 줄여서 실시간적으로 갱신할 수 있어야 하는데 현재 범용 컴퓨터 능력으로는 질감 등을 특징으로 추출하는 방법 등은 대부분 연산처리의 부하 때문에 적용상의 한계가 있다. 본 논문에서는 적어도 초당 30프레임의 카메라 영상에서 주행 중인 자동차와 같이 고속으로 움직이는 객체를 탐지하는 응용영역에서 실시간으로 배경 영상을 갱신하는 알고리즘을 제시하고, 실제 입력영상에서 객체 영역을 추출하는 시험을 통해 성능을 분석하였다.

• 제어로봇시스템학회논문지
• /
• 제16권11호
• /
• pp.1074-1081
• /
• 2010

Today, the research related to the robot is achieved in various part. With the high interest in means of transport, various researches about autonomous mobile robot and next generation transport is continuing. The unicycle robot among these needs much control technique like balance control model and driving model. For autonomous driving of this unicycle robot, from the basic balance control to direction switching control and velocity control are needed. But the environment elements like a gradient and frictional force or unbalanced elements from the structural feature. The unicycle needs the real time balance control so more complex, harder to control. And when functional addition is made, the problem that fall entire reaction velocity or accuracy would be happen. This paper introduces entire dynamics modeling of the unicycle robot and reduced model. And propose the new balance control algorithm using fuzzy controller. Also the evaluation about performance would be made through the test.

• Nuclear Engineering and Technology
• /
• 제48권3호
• /
• pp.650-659
• /
• 2016

As a type of accident-tolerant fuel, fully ceramic microencapsulated (FCM) fuel was proposed after the Fukushima accident in Japan. The FCM fuel consists of tristructural isotropic particles randomly dispersed in a silicon carbide (SiC) matrix. For a fuel element with such high heterogeneity, we have proposed a two-temperature homogenized model using the particle transport Monte Carlo method for the heat conduction problem. This model distinguishes between fuel-kernel and SiC matrix temperatures. Moreover, the obtained temperature profiles are more realistic than those of other models. In Part I of the paper, homogenized parameters for the FCM fuel in which tristructural isotropic particles are randomly dispersed in the fine lattice stochastic structure are obtained by (1) matching steady-state analytic solutions of the model with the results of particle transport Monte Carlo method for heat conduction problems, and (2) preserving total enthalpies in fuel kernels and SiC matrix. The homogenized parameters have two desirable properties: (1) they are insensitive to boundary conditions such as coolant bulk temperatures and thickness of cladding, and (2) they are independent of operating power density. By performing the Monte Carlo calculations with the temperature-dependent thermal properties of the constituent materials of the FCM fuel, temperature-dependent homogenized parameters are obtained.

• 한국도로학회논문집
• /
• 제14권6호
• /
• pp.57-65
• /
• 2012

PURPOSES : Efficiency Improvement of a public road construction project management work using the development of a real-time remote site monitoring system METHODS : In this study, we developed the remote site monitoring system using a web camera for road construction projects in the RCMA(Regional Construction Management Administration). We can be monitored a construction progress and a weak point of the situation in real time using this. To achieve this, we tested about 10 road construction projects ordered by RCMA. Then, we verified a applicability for the site monitoring system in future. RESULTS : Take advantage of the remote site monitoring system consists of the Construction CALS System, one of the business systems used in the part of the MLTM(Ministry of Land, Transport and Maritime Affairs) institution-agencies. Was configured to be served through the "Construction CALS System" of "Construction Management System(Contractors)" and the "Construction CALS Portal System". Through this, Benefit analysis through a pilot application of the 10 road construction sites and developing considerations and "Guide for visual information processing equipment installation-operating in construction sites"are presented. CONCLUSIONS : Through the establishment of remote site monitoring system can improve the efficiency of construction management services. In addition, Various disasters and calamities, accidents and illegal construction will be prevented in advance is expected. This is expected to further improve the quality of the facilities.

• 한국유기농업학회지
• /
• 제21권1호
• /
• pp.1-18
• /
• 2013

Animal and crop production systems were integrated on a single farm. This integrated farming system recycled nutrients on the farm. The separation of animal and crop production with the introduction of cheap commercial fertilizers, farms were not used land-applied manure. The on-line manure matching is one of the emerging business in the achievement of recycling and resource recovery. The manure matching actively promotes the reuse and recycling of by-products and manure. This study constructs to manure matching information system to solve the exchange problems between herders and croppers. Manure matching web sites designed. This paper introduces a web-based animal manure matching system. A manure matching service, part of the manure transport, links farmers who produce excess manure with farmers who can use the manure. Farmers registered with the service have requested manure. The manure matching service supports the transport project by linking farmers with excess manure with those farmers who can utilize the manure safely as a nutrient source. The goal of the service is to protect water quality by fostering efficient land application. Benefits to those who use the manure network include reduced disposal costs, lower purchase costs and recycling of manure. The manure matching is based on the principle that 'one persons waste is another person's fertilizer.' It provides a free online matchmaking service for environmentally safe manure recycling management system.