• Journal of Korean Society of Transportation
• /
• v.33 no.5
• /
• pp.461-469
• /
• 2015

The next generation high-speed train, HEMU-430X, was developed and is now being tested. However, the existing mode choice models based on the guidelines for feasibility studies do not consider a high-speed train with a higher speed than KTX. This limitation might result in inaccurate demand forecasting. In this research, a stated preference survey was conducted in order to supplement the problem by considering the characteristics of HEMU-430X. Based on the survey results, this research developed two mode choice models, including a multinomial logit model and a nested logit model. For this purpose, the utility functions of travel time and travel costs were estimated using a Limdep 8.0 NLOGIT 3.0 package. After comparing the two models, it was concluded that the nested logit model is appropriate. The paper suggested a plan to implement the nested logit model and presented a policy implication.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.6
• /
• pp.123-132
• /
• 2012

Gas sensors has been used very differently that depending on following purposes; Automotive (exhaust gas, fuel mixture gas, oxygen, particulates), agriculture / food industry (fresh, stored, CO2, humidity, NH3, nitrogen oxide gas, organic gas, toxic gas emitted from pesticides and insecticides), industrial / medical (chemical gas, hydrogen, oxygen and toxic gases), military (chemical weapon), environmental measurements (CO and other air pollution consisting of sulfur and nitrogen gas), residential (LNG, LPG, butane, indoor air, humidity). The types of industrial toxic substances are known about 700 species and many of these exist in gaseous form under normal conditions. he multi-gas detection sensors will be developed for casualties that detect the most important and find easy three kinds of gases in marine plant; carbon dioxide(CO2), carbon(CO), ammonia(NH3). Package block consists of gas sensing device minor ingredient, rf front end, zigbee chip. Develope interworking technology between the sensor and zigbee chip inside a package. Conduct a performance test through test jig about prototype zigbee sensor module with rf output power and unwanted emission test. This research task available early address when poisonous gas leaked from large industrial site and contribution for workers' safety at the enclosed space.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.2
• /
• pp.133-145
• /
• 2010

Recently, due to advances in information technologies, the trend of tour types has been changing from package tour to independent tour. Independent tour is a tour which a traveler collect airplane ticket, travel destinations, sightseeing time, transport, lodging and plan traveling schedules by oneself. But the traveler has many difficulties for predicting tour schedules, due to lack of adequate information of travel destinations. In this study, traveling schedule prediction method which to minimize the cumulative fatigue of tourist for use of unnecessary transport is proposed using travelling salesman problem algorithm. It is considered moving time between sightseeing, sightseeing time on destination and traveling time for a day.

• Structural Engineering and Mechanics
• /
• v.52 no.1
• /
• pp.51-73
• /
• 2014

A three-dimensional finite element model for the Jiashao Bridge, the longest multi-span cable-stayed bridge in the world, is established using the commercial software package ANSYS. Dynamic characteristics of the bridge are analyzed and the effects of structural system measures including the rigid hinge, auxiliary piers and longitudinal constraints between the girders and side towers on the dynamic properties including modal frequency, mode shape and effective mass are studied by referring to the Jiashao Bridge. The analysis results reveal that: (i) the installation of the rigid hinge significantly reduces the modal frequency of the first symmetric lateral bending mode of bridge deck. Moreover, the rigid hinge significantly changes the mode shape and effective mass of the first symmetric torsional mode of bridge deck; (ii) the layout of the auxiliary piers in the side-spans has a limited effect on changing the modal frequencies, mode shapes and effective masses of global vibration modes; (iii) the employment of the longitudinal constraints significantly increases the modal frequencies of the vertical bending modes and lateral bending modes of bridge deck and have significant effects on changing the mode shapes of vertical bending modes and lateral bending modes of bridge deck. Moreover, the effective mass of the first anti-symmetric vertical bending of bridge deck in the longitudinal direction of the fully floating system is significantly larger than that of the partially constrained system and fully constrained system. The results obtained indicate that the structural system measures of the multi-span cable-stayed bridge have a great effect on the dynamic properties, which deserves special attention for seismic design and wind-resistant design of the multi-span cable-stayed bridge.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.1
• /
• pp.13-27
• /
• 2012

According to the development of Intelligent Transportation System technology, VMS(Variable Message Signs) are operating on highway. But, VMS display information which don't reflect traffic condition and driver's human factor. So driver can't read VMS message during limited time, it makes to reduce VMS's reliability. This paper presents a model for VMS message reading time and distance considering traffic condition and human factor. We built driving simulator by Winroad package which is able to copy real driving condition. Subjects were comprised of 20 people who reflect domestic driver's condition such as sex. We did regression analysis with experiment results and draw the model. The model could be possible to develop message- set considering traffic condition and human factor.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.1 s.5
• /
• pp.5-16
• /
• 2001

ITS (Intelligent Transport System) has been developed into the full service leading to a new life style with the various services from private sector, which was intended to prevent the traffic accidents and to reduce the traffic jams. Since traveler-type components used in ITS services are not exclusively designed. but they can be one of the existing devices such as mobile phone, PDA, PC, KIOSK and etc. We need to consider that these devices are equipped to support ITS related services. Therefore, this study modeled, through UML, a framework of portable components based on the present national ITS architecture; the purpose being that private companies may be able to develop portable components with concepts of ITS services. The methodology of the modeling process we followed consisted of four steps: (1) analyzing service-related subsystems, (2) generalizing equipment-package and functional specifications. (3) describing information and function specific reference models, and (4) UML modeling of the reference model.

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.347-350
• /
• 2004

A space radiation analysis has been used to evaluate an ability of electronic equipment boxes or spacecrafts to endure various radiation effects, so it helps design thicknesses of structure and allocate components to meet the radiation requirements. A comparison study of space radiation dose analysis programs SPENVIS Sectoring Tool (SST) and SIGMA II is conducted through some structure cases, simple sphere shell, box and representative satellite configurations. The results and a discussion of comparison will be given. A general comparison will be shown for understanding those programs. The both programs use the same strategy, solid angle sectoring with ray-tracing method to produce an approximate dose at points in representative simple and complex models of spacecraft structures. Also the particle environment data corresponding to mission specification and radiation transport data are used as input data. But there are distinctions between them. The specification of geometry model and its input scheme, the assignment of dose point and the numbers, the prerequisite programs and ways of representing results will be discussed. SST is a web-based interactive program for sectoring analysis of complex geometries. It may be useful for a preliminary dose assessment with user-friendly interfaces and a package approach. SIGMA II is able to obtain from RSICC (Radiation Safety Information Computational Center) as a FOR-TRAN 77 source code. It may be suitable for either parametric preliminary design or detailed final design, e.g. a manned flight or radiation-sensitive component configuration design. It needs some debugs, recompiling and a tedious work to make geometrical quadric surfaces for actual spacecraft configuration, and has poor documentation. It is recommend to vist RSICC homepage and GEANT4/SSAT homepage.

• Journal of Korean Society of Rural Planning
• /
• v.20 no.3
• /
• pp.191-199
• /
• 2014

The current rural conditions are undergoing the change from the past production-intensive structure to an integral and complex one of producing, processing, selling, touring and lodging owing to the changes of life-style, consumption trend and social environments. The rural area is developing into a community of rural tourism villages to grow into one management system along with the assistance of the government's various supporting projects. Through this, the rural designing has got to play a significant role as one of the factors of the enhancement of competitiveness and the increase of income. Therefore, those previous studies on the variety and possibility of rural development are being employed for the researches which are to develop techniques of branding, marketing and packaging. In particular, the researches for VI (Village Identity), BI (Brand Identity) and designs of landscaping, packaging of agricultural specialties and display stores, which definitely shows that the importance of rural designing, is being paid a lot more attention to. Thus, this study has verified the site commercialization and its effect by developing some practical designing with the focus of package design at rural tourism villages. The Okgye Village in Yoncheon was selected for study subject based on the result of status investigation. This study has analyzed such problems as lack of village identity, non-description of items and their indispensible marks which were seen their designs of village and packaging. The colors of major items and the village image being substituted into the image scale of IRI color were estimated so that the appropriate colors might be selected, along with which the shapes of major items were decided to be motif for the village symbol and design to be created. The designs of such major items as grains, greens and sauces were created with the consideration of the easiness of loading, the continuity of using and the aesthetics. For grains, those outer boxes which are possible for set-packaging and small-sized packaging have been developed. For greens were developed the boxes with the structure of the permeability for the persisten't quality as well as the possibility for packaging small amount. In case of sauces, those outer-boxes equipped with fixing tray were made with the transport-convenience taken into consideration. The sticker-label designs for all those three were also developed which stand for the village identity and are conveniently used in each farm family. When this development was applied at the sites, it was found that the satisfaction and reliability of consumers as well as the satisfaction of farmers were raised along with the increase by more than 30% after the improvement.

• Journal of Plant Biotechnology
• /
• v.4 no.3
• /
• pp.103-107
• /
• 2002

The Good Agriculture Practice (GAP) program, being established in China, is an optimal way for the sustainable utilization of the medicinal plant and animal resources. Most frequently used Chinese materia medica will be mainly produced from the GAP bases in the future. To assure the successful operation of GAP program, standard operating procedure (SOP) should be implemented for specific plants or animals. Both GAP and SOP include the requirements in many aspects from the ecological environment of cultivation place, germplasm and varieties, seedling and transplant, fertilization, irrigation, and field care, to harvest and process, package, transport and storage. As a complex system, GAP demands strong commitment from the pharmaceutical industry, local administrative involvement, long term R&D support, and years of time of development before a satisfactory result can be achieved.

• Asian Journal of Atmospheric Environment
• /
• v.6 no.2
• /
• pp.111-117
• /
• 2012

To establish area specific control strategy for ambient ozone in the Seoul Metropolitan Area (SMA), the maximum ozone concentration in each local government district in the SMA were estimated by using the OZone Isopleth Plotting Package for Research (OZIPR) model. The modeling period was June 2000 and the emission inventory data used were from National Institute of Environmental Research (NIER). Except the islands of Incheon, whole Seoul and Incheon areas were volatile organic compounds (VOCs) limited, i.e., decreasing the oxides of nitrogen ($NO_X$) emission alone may increase the maximum ozone concentration upto certain point. In Gyeonggi, 12 areas were VOCs limited while 12 areas were in between VOCs limited and $NO_X$ limited, i.e., decreasing both $NO_X$ and VOCs emission may decrease the maximum ozone concentration. Majority of the estimated ozone values were lower than the measured values. The reason could be inaccuracy in emission inventories and/or transport from other areas. The same calculation was carried out for June 2004 and it was found that Seoul was still in the VOCs limited condition.