• 제목/요약/키워드: Transport layer

검색결과 1,244건 처리시간 0.026초

부직포 충전재의 구조적 특성이 수분전달 특성에 미치는 영향-단층구조와 이층구조 부직포의 비교- (The Effect of Geometrical Structure on the Moisture Transport Properties of Nonwoven Batting Materials)

  • 김희숙;나미희
    • 한국의류학회지
    • /
    • 제24권6호
    • /
    • pp.810-818
    • /
    • 2000
  • The purpose of this study was to analyze the effect of geometrical structure on the moisture transport properties of nonwoven batting materials. Two types of nonwovens were used such as single and double layered nonwovens. Steady and dynamic state water vapor transport properties were measured by absorption, evaporation and cobaltous chloride method respectively. The results of this study were as follows: 1) Geometrical structure affected water vapor evaporation, but there were no differences between single and double layered nonwovens in moisture absorption. Thickness and air permeability were influencing factor on water vapor transport rate. 2) Directionality of double layered nonwoven was observed both in steady and dynamic state moisture transport. There were differences between upper and lower layer of double layered nonwoven both in moisture absorption rate and color change by cobaltous chloride method. 3) In dynamic state of water vapor transport rate, single layered nonwoven reached more rapidly at the established relative humidity. It was confirmed that geometrical structure affected water vapor evaporation and hydrophilicity of fiber affected moisture absorption because there were much more water vapor transport rate by evaporation than absorption within the same period of time.

  • PDF

Verification of the Wind-driven Transport in the North Pacific Subtropical Gyre using Gridded Wind-Stress Products Constructed by Scatterometer Data

  • Aoki, Kunihiro;Kutsuwada, Kunio
    • 대한원격탐사학회:학술대회논문집
    • /
    • 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
    • /
    • pp.418-421
    • /
    • 2007
  • Using gridded wind-stress products constructed by satellite scatterometers (ERS-1, 2 and QSCAT) data and those by numerical weather prediction(NWP) model(NCEP-reanalysis), we estimate wind-driven transports of the North Pacific subtropical gyre, and compare them in the central portion of the gyre (around 300 N) with geostrophic transports calculated from historical hydrographic data (World Ocean Database 2005). Even if there are some discrepancies between the wind-driven transports by the QSCAT and NCEP products, they are both in good agreement with the geostrophic transports within reasonable errors, except for the regional difference in the eastern part of the zone. The difference in the eastern part is characterized by an anticyclonic deviation of the geostrophic transport resulting from an anti-cyclonic anomalous flow in the surface layer, suggesting that it is related to the Eastern Gyral produced by the thermohaline process associated with the formation of the Eastern Subtropical Mode Water. We also examine the consistency of the Sverdrup transports estimated from these products by comparing them with the transports of the western boundary current, namely the Kuroshio regions, in previous studies. The net southward transport, based on the sum of the Sverdrup transports by QSCAT and NCEP products and the thermohaline transport, agrees well with the net northward transport of the western boundary current, namely the Kuroshio transport. From these results, it is concluded that the Sverdrup balance can hold in the North Pacific subtropical gyre.

  • PDF

A Spirobenzofluorene Type Phosphine Oxide Molecule as A Triplet Host and An Electron Transport Material for High Efficiency in Phosphorescent Organic Light-Emitting Diodes

  • Jang, Sang-Eok;Jeon, Soon-Ok;Yook, Kyoung-Soo;Joo, Chul-Woong;Son, Hyo-Suk;Lee, Jun-Yeob
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.767-770
    • /
    • 2009
  • We synthesized a spirobenzofluorene type phosphine oxide (SPPO2) as a new triplet host and an universal electron transport material for phosphorescent organic light-emitting diodes(PHOLEDs). Red PHOLEDs with the SPPO2 host material showed a high quantum efficiency of 14.3 % with a current efficiency of 20.4 cd/A. In addition, the SPPO2 could be applied as an electron transport material which can be matched with any host material due to the lowest unoccupied molecular orbital of 2.4 eV. Electron injection from a cathode to the SPPO2 electron transport layer was better than common electron transport materials. In particular, the SPPO2 was effective as the electron transport material in blue PHOLEDs and the quantum efficiency was more than doubled and driving voltage was lowered by more than 3 V using the SPPO2 instead of common electron transport material.

  • PDF

NGN에서 오버레이를 이용한 사용자 관점의 End-to-end QoS 지원 구조 (An Architecture for User Level End-to-end QoS using Overlay in NGN)

  • 이지현;임경식;오행석;남택용
    • 정보처리학회논문지C
    • /
    • 제12C권6호
    • /
    • pp.781-792
    • /
    • 2005
  • 본 논문은 광대역 통합망에서 오버레이를 이용하여 사용자 관점의 End-to-end QoS 지원 구조를 제안한다. 기존 광대역 통합망은 제어평면의 IMS에서 사용자평면에 존재하는 IP 전달망의 직접적인 트래픽제어와 자원예약을 수행하여 QoS를 제공한다. 그리고 사용자의 End-to-end QoS를 지원하기 위하여 전달망에서 확보한 QoS를 사용자에게 최대로 전송하고 품질 저하를 최소화하는 연구가 진행되고 있다. 하지만 이러한 기존 연구와 더불어 사용자가 요구하는 서비스 품질의 차별화, 사용자의 단말환경에 최적화된 컨텐츠의 제공과 같은 사용자 수준에서의 확장된 QoS 개념이 고려될 필요가 있다. 따라서 본 논문에서 제안하는 오버레이 서비스 네트워크 구조의 전송계층에서는 다양한 망환경에 가장 효율적인 전송 프로토콜을 사용하여 최대의 전송효율을 제공하는 프로토콜 최적화기능을 지원한다. 그리고 응용계층에서는 사용자 단말의 데이터 변환과정에서 발생하는 프로세싱지연을 네트워크로 분산시키고, 오버에이를 이용하여 사용자의 서비스수준과 응용서비스의 특징 및 단말환경에 적합한 형태로의 중간변환기능을 수행한다. 결과적으로 본 논문에서는 광대역 통합망에서 전송계층과 응용계층의 서비스 품질 제어 기능을 추가하여 사용자의 End-to-end QoS를 지원하는 오버레이 서비스 네트워크의 구조와 내부 컴포넌트 기능, 그리고 3GPP와의 연동을 통한 QoS 제공 방안을 제안한다.

엑시톤 억제층 두께에 따른 유기 광기전력 소자의 특성 (Properties in Organic Photovoltaic Cell Depending on the Exciton Blocking Layer Thickness)

  • 오현석;이준웅
    • 한국전기전자재료학회논문지
    • /
    • 제18권12호
    • /
    • pp.1148-1151
    • /
    • 2005
  • Photovoltaic effects in organic solar cell were studied in a cell configuration of ITO/PEDOT:PSS/CuPc(20 nm)/$C_{60}$(40 nm)/BCP/Al(150 nm) at room temperature. Here, the BCP layer works as an exciton blocking layer. The exciton blocking layer must transport electrons from the acceptor layer to the metal cathode with minimal increase in the total cell series resistance and should absorb damage during cathode deposition. Therefore, a proper thickness of the exciton blocking layer is required for an optimized photovoltaic cell. Several thicknesses of BCP were made between $C_{60}$ and Al. And we obtained characteristic parameters such as short-circuit current, open-circuit voltage, and power conversion efficiency of the device under the illumination of AM 1.5.

A Conceptual Two-Layer Model of Thermohaline Circulation in a Pie-Shaped $\beta$-Plane Basin

  • Park, Young-Gyu
    • Journal of the korean society of oceanography
    • /
    • 제38권1호
    • /
    • pp.11-16
    • /
    • 2003
  • The three dimensional structure of thermohaline circulation in a D-plane is investigated using a conceptual two layer model and a scaling argument. In this simple model, the water mass formation region is excluded. The upper layer represents the oceans above the main thermocline. The lower layer represents the deep ocean below the thermocline and is much thicker than the upper layer. In each layer, geostrophy and the linear vorticity balance are assumed. The cross interfacial velocity that compensates for the deep water mass formation balances downward heat diffusion from the top. From the above relations, we can determine the thickness of the upper layer, which is the same as thermocline depth. The results we get is basically the same as that we get for an f-plane ocean or the classical thermocline theory. Mass budget using the velocity scales from the scaling argument shows that western boundary and interior transports are much larger than the net meridional transport. Therefore in the thermohaline circulation, horizontal circulation is much stronger than the vertical circulation occuring on a meridional plane.

BCP를 엑시톤 억제층으로 사용한 유기 광기전력 소자의 특성 (Properties of the Exciton Blocking Layer with BCP in Organic Photovoltaic cell)

  • 오현석;이준웅;이원재;김태완
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2005년도 추계학술대회 논문집 Vol.18
    • /
    • pp.273-274
    • /
    • 2005
  • Photovoltaic effects in organic solar cell were studied in a cell configuration of ITO/PEDOT:PSS/CuPc(20nm)/$C_{60}$(40nm)/BCP/Al(150nm) at room temperature. Here, the BCP layer works as an exciton blocking layer. The exciton blocking layer must transport electrons from the acceptor layer to the metal cathode with minimal increase in the total cell series resistance and should absorb damage during cathode deposition. Therefore, a proper thickness of the exciton blocking layer is required for an optimized photovoltaic cell. Several thicknesses of BCP were made between $C_{60}$ and Al. And we obtained characteristic parameters such as short-circuit current, open-circuit voltage, and power conversion efficiency of the device under the illumination of AM 1.5.

  • PDF

일정 전위 모드에서의 전기와류 불안정성에 대한 시간-분해 해석 (Time-resolved Analysis for Electroconvective Instability under Potentiostatic Mode)

  • 이효민
    • Korean Chemical Engineering Research
    • /
    • 제58권2호
    • /
    • pp.319-324
    • /
    • 2020
  • 전기와류 불안정성은 전기투석 장치, 갈바니 전지, 전해 전지 등의 이온-선택성 이동 현상계에서 발견되는 비선형 이동 현상이다. 이 불안정성은 이온-선택성 표면 근처 공간 전하층의 요동에 의해 발생하며, 불안정성의 발현은 물질 전달 속도를 증가시켜 준다. 따라서 전기와류 불안정성은 물질 전달 측면에서 중요한 의미를 가진다. 최근의 실험적 기법들이 불안정성의 직접적 가시화를 가능하게 해주었으나, 실험적 한계점에 의해 불안정성의 원론적 연구는 제한된 영역에서만 이루어지고 있다. 본 연구에서는 일정 전위 모드에서의 전기와류 불안정성에 대한 수치 해석을 진행하여 전류-시간 곡선과 불안정성의 거동 간의 상관관계를 밝히고자 하였다. 시간-분해 해석을 통하여, 불안정성의 발달 거동을 SCL 형성 - 전기와류 불안정성의 성장 - 정상 상태 도달로 구분 지었다. 더불어, 인가 전위에 따른 전이 시간들의 크기 법칙 또한 수치적으로 유도하였다.

Electrical Quadruple Layer under the AC Electric Field

  • Suh, Yong-Kweon
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2006년도 추계 학술대회논문집
    • /
    • pp.167-176
    • /
    • 2006
  • In this paper we show that solutions of the nonlinear Nernst-Planck equation possesses the quadruple-layer structure near the interface when the electrolyte receives a high frequency forcing such as a high-frequency alternating current. Very near to the interface wall, the well-known, classical Stern layer exists. Near to the Stern layer we have the secondly thin layer (to be called inner layer in this paper) where the ion concentrations behave under the same frequency as the external forcing. However, in this layer, the positive and negative ion concentrations develop with the time phase 180-degree different from each other. Next to this second layer, we have the third layer (called middle layer) in which two ion concentrations change with the time period double the forcing, and both concentrations behave in the same time phase. In the outermost layer, i.e. the forth layer, (called outer layer) the ion concentrations show the same-phase development as the third one but decaying very slowly in time. Our assertion is mostly based on the 1-D numerical simulation for the Nernst-Planck equation under a high frequency AC field assuming that the quadruple layer is very thin compared with the length scale representative of the bulk region.

  • PDF

WDM 광전송시스템의 감시제어 기능실현을 위한 경보신호 적용에 관한 연구 (A Study on the Application of Alarm Signals for the Realization of OAM Function in the WDM Optical Transmission System)

  • 이창기;차영욱
    • 한국정보처리학회논문지
    • /
    • 제7권9호
    • /
    • pp.2958-2968
    • /
    • 2000
  • WDM 시스템에서 효과적으로 감시제어 기능을 수행하기 위해서는 경보신호의 적용이 요구된다. 그러나 광전달망의 각 계층별 적용되어야 할 경보신호에 대한 연구는 현재까지 아직 기초적인 상태에 머물러 있고, 그리고 감시채널의 구조와 구성에 대해서 제안된 연구결과가 없다. 따라서 본 논문은 ITU-T 광전달망의 요구사항을 기초로 하고, 자국과 대구 및 텐덤 구간의 신호 감시기법을 적용하여 단국형과 ADM형 WDM 시스템 모두에 적용할 수 있는 각 계층별 경보신호와 이의 전파 체계를 제시하였고, 감시채널의 구성 및 오버헤드 구조를 보였다. 또한 단국형과 ADM 형의 WDM 시스템에서 다양하게 발생할 수 있는 장애상태에서도 감시제어 기능을 효과적으로 수행할 수 있음을 보였다.

  • PDF