• 물과 미래
• /
• 제5권2호
• /
• pp.6-16
• /
• 1972

It has been well studied and known that the yields from the rice fields irrigated by the cold water such as the water directly flowing in from mountain valleies, underground water and subground water are largely influenced by the water temperature. However, the best method of raising water temperature has not yet been established. This is because there are some essentially difficult problems associated. When we examine the effects of $1^{\circ}C$ rise in the water temperature under natural condition on rice growing, the necessity of this line of study is verified. The results of Mihara's study show that rice bears its fruits at the water temperature above $19^{\circ}C$ and the difference of $1^{\circ}C$ in the range of $19^{\circ}C$ to $22^{\circ}C$ can produce the 20% of difference in yields. Because of these facts, most farmers have made use of water temperature raising ponds, zigzag waterways and shelter belts. But the most important factor in raising water temperature has been found to be the heat loss due to evaporation. Recently, a good deal of experiment on raising water temperature and soil temperature by reducing the evaporation are being carried out all over the world. The reduction of evaporation does not only reduce heat loss, from the surface but also reduce the loss of water. Present study is aimed to determine the efficiency of different chemicals by which monomolecular films are formed over different surfaces such as water surface, soil surface and the surface of plant leaves with a purpose of preventing the transpiration, and aimed to observe the effects of the temperature rise and its influence on growing state as well as the durability of the plants under drought condition.

• 한국농공학회지
• /
• 제16권2호
• /
• pp.3430-3437
• /
• 1974

.It is very importaut to know the water consumption of crops in planning irrigation works and practicing suitable soil moisture management. For the purpose of making it clear that how much water be consumed to cultivate the Chinese cabbage, Chamber method has been applied. Main equipments in the transpiration chamber are flowers, manometer and electric thermograph. The chamber made of vynyl plate has a small entrance at the base and an exit at the top, and the ventilation in the chamber was carried out by a flower through the entrance and exit. Air-flow adjusted by an orifice manometer enters the chamber from the outside over the crop canopy through the pipe like a chimney and finally goes out to the outside. Two sets which consist of a pair of dry and wet bulb made by thermistor are installed in the entrance and exit tube, and record air temperature automatically. Evapotranspiration amount is computed from the air-flow quantity and difference in absolute humidity between at the entrance and exit of the chamber by the following equation: ET=(X2-X1)${\times}$Q where ET=evapotranspiration amount X1=absolute humidity at the entrance(g/㎥) X2=absolute humidity at the exit(g/㎥) Q=air-flow quantity(㎥) This study was carried out at the upland farm of the Institute of Agriculture Engimeering and Utilization, Suwon, Korea. from 1971 to 1973. The results obtained in this experiment are as follows: 1. The total amount of evapotranspiration of Chinese Cabbage that is cultivated in autumn is 408.1mm during growth period. 2. Chinese cabbage rapidly grows up in the second ten days of September, 40th to 50th days after seeding. At the same time, the maximum amount of evaportranspiration of Chinese cabbage is 61.6mm/10 days 3. The correlation between Pan-evaporation and evapotranspiration is high, coefficient of correlation r=0.88**, and can be shown as The following regression equation: ET=0.913E+20.273 4. Evapotranspiration is closely related with meteorological factors: r=0.85**, for insolation, r=0.76** for air temperature, respectively. 5. The percentage of evapotranspiration amount, at the beginning of growth stage, gradually increases in proportion as the Chinese Cabbage grows but is largely affected by meteorological factors after the green cover formation. 6. By Blaney and Griddle formula, evaportranspiration coefficient "K" are within from 0,85 to 1.27.

• 한국작물학회지
• /
• 제27권1호
• /
• pp.72-77
• /
• 1982

고려인삼의 삽목에 의한 영양번식방법을 개발하고저 완전히 전엽된 3매 소엽을 부착한 묘삼경을 삽수로 취하여 NAA의 처리농도가 이들 삽수의 발근에 미치는 영향을 조사하는 한편 삽목용토 및 삽목방법이 발근 및 발근후의 근생장에 미치는 영향을 조사하였다. NAA는 삽목후 관수시 NAA용액으로 관수하였던 바 1.0ppm 용액의 관수가 발근율 및 발근후의 근생장에 가장 효과적이었으며 또한 삽목용토로는 부엽토와 모래의 혼합토가 가장 이상적이었다. 삽목후 삽수에 부착된 엽에서의 증산을 억제하고 삽수의 고사를 방지하기 위해서는 Acril film으로 만든 덮개로 삽수의 지상부를 씌워 주는 것이 삽수의 발근에는 물론 특히 발근후의 근생육에 효과적이었다. 한편 5매의 소엽이 부착되어 있는 2년생 인삼의 엽병을 삽수로 하여 부엽토와 모래의 혼합토에 삽목하고 1.0ppm의 NAA 용액을 관수하였던 바 역시 양호한 발근율과 근생장을 보였는데 근의 생장량은 묘삼에서 취한 경삽보다는 약간 부진하였다.

• 농업과학연구
• /
• 제46권2호
• /
• pp.239-256
• /
• 2019

The quality of tomatoes drastically changes according to storage conditions, such as temperature, humidity, and air composition. High storage temperatures result in the degradation of the firmness and color of tomatoes and in decay by bacteria, whereas chilling injury and softening can be caused by storage at low temperatures. The gas composition in the storage and packaging are other parameters that influence the quality and shelf life of tomatoes by preventing excessive transpiration and respiration. In addition, tomato quality is dependent on the degree of maturity and harvest season. Because there are many quality parameters, it is necessary to systemically establish an optimal standard, and this approach requires collecting and reviewing various data on storage conditions. The aim of this review was to provide basic information by comparing and analyzing studies on the changes in tomato quality (firmness, color, lycopene content, and acidity of tomatoes) during storage and to describe a few models that can assess the quality parameters. Many studies have provided results from experiments on the effects of postharvest control (e.g., storage temperature, packaging film, and gas treatment, as reviewed above) on tomato quality including firmness, soluble solids content, and lycopene content. However, it is still necessary to conduct an overall analysis of the published conditions and to determine the best method for preserving the quality of tomatoes as well as other fruits.

• Journal of Forest and Environmental Science
• /
• 제34권3호
• /
• pp.224-234
• /
• 2018

An efficient method to select drought tolerant Korean native plants using in vitro culture system was established in this study. While the plant growths and root inductions of each plant were proportionately affected by concentrations of mannitol on in vitro culturing seven plant species to test tolerance to osmotic stress, growth index (GI) and number of root induction of Chrysanthemi zawadskii var. latilobum and Dianthus chinensis var. semperflorens plantlets were higher than the others in 125mM mannitol. In test with polyethylene glycol (PEG), plantlets of C. zawadskii var. latilobum and D. chinensis var. semperflorens showed higher GI and number of root induction than the others in 33.3mM. On testing whether the well grown plants under osmotic stress are tolerant to virtual drought stress, there were significant differences in the withering rates of C. zawadskii var. latilobum and D. chinensis and those of were Aster yomena and Centaurea cyanus after 12 days without watering. It was found that significantly lower stomata numbers were shown in both drought tolerant plants than the sensitive plants. Averages of the stomata circumferences and the stomata area in the plantlets of the tolerant species were larger than those of the sensitive plants D. chinensis var. semperflorens showed the lowest transpiration level per unit area. The highest stomatal area per unit area was found in C. zawadskii, followed by D. chinensis var. semperflorens, Aster yomena and C. cyanus. In conclusion, C. zawadskii var. latilobum and D. chinensis var. semperflorens were more tolerant to drought than other two species. Furthermore in vitro selection was successfully used to screen drought tolerance species of native plant species.

• 한국농림기상학회지
• /
• 제22권3호
• /
• pp.205-214
• /
• 2020

본 연구에서는 중량식 라이시미터를 이용하여 토양 및 물관리 방법에 따라 배추와 옥수수 재배기간 동안 물수지를 평가하였으며, 작물 생산성과 물 부족 상황을 고려하여 작물 수분스트레스 계수와 최소 물 필요량을 산정하였다. 2018 년 배추 재배는 정식 2 주 후 빈번한 강우로 인해 관개가 실시되지 않아 무관개구와 적습관개구의 관개량 차이가 없었으며, 생산량 차이 또한 나타나지 않았다. 2018 년 배추 재배를 제외하고 배추와 옥수수 재배에서 적습관개구가 무관개구보다 생산량이 높게 나타났으며 대체적으로 증발산량 또한 높게 나타났다. 생산량과 증발산량은 밀접한 관련이 있으며 바이오매스 증가에 따라 증산작용이 활발해짐을 알 수 있었다. 작물 수분스트레스 계수는 배추 중기 0.8, 후기 0.8, 옥수수 중기 0.8, 후기 0.5 로 산정되었다. 배추와 옥수수의 최소 물 필요량(2017 년 배추 196.2 mm, 2018 년 옥수수 321.0 mm)은 적정 물 필요량(배추 239.4 mm, 2018 년 옥수수 466.9 mm) 대비 각각 82.0%, 68.8% 수준으로 나타났다. 이러한 산정 결과는 물부족 시기에 최소 관수량을 확보하여 작물 재배를 위한 물관리의 기초자료로 활용할 수 있을 것으로 생각된다.

• Molecules and Cells
• /
• 제41권5호
• /
• pp.413-422
• /
• 2018

Soybean transgenic plants with ectopically expressed AtABF3 were produced by Agrobacterium-mediated transformation and investigated the effects of AtABF3 expression on drought and salt tolerance. Stable Agrobacterium-mediated soybean transformation was carried based on the half-seed method (Paz et al. 2006). The integration of the transgene was confirmed from the genomic DNA of transformed soybean plants using PCR and the copy number of transgene was determined by Southern blotting using leaf samples from $T_2$ seedlings. In addition to genomic integration, the expression of the transgenes was analyzed by RT-PCR and most of the transgenic lines expressed the transgenes introduced. The chosen two transgenic lines (line #2 and #9) for further experiment showed the substantial drought stress tolerance by surviving even at the end of the 20-day of drought treatment. And the positive relationship between the levels of AtABF3 gene expression and drought-tolerance was confirmed by qRT-PCR and drought tolerance test. The stronger drought tolerance of transgenic lines seemed to be resulted from physiological changes. Transgenic lines #2 and #9 showed ion leakage at a significantly lower level (P < 0.01) than ${\underline{n}}on-{\underline{t}}ransgenic$ (NT) control. In addition, the chlorophyll contents of the leaves of transgenic lines were significantly higher (P < 0.01). The results indicated that their enhanced drought tolerance was due to the prevention of cell membrane damage and maintenance of chlorophyll content. Water loss by transpiration also slowly proceeded in transgenic plants. In microscopic observation, higher stomata closure was confirmed in transgenic lines. Especially, line #9 had 56% of completely closed stomata whereas only 16% were completely open. In subsequent salt tolerance test, the apparently enhanced salt tolerance of transgenic lines was measured in ion leakage rate and chlorophyll contents. Finally, the agronomic characteristics of ectopically expressed AtABF3 transgenic plants ($T_2$) compared to NT plants under regular watering (every 4 days) or low rate of watering condition (every 10 days) was investigated. When watered regularly, the plant height of drought-tolerant line (#9) was shorter than NT plants. However, under the drought condition, total seed weight of line #9 was significantly higher than in NT plants (P < 0.01). Moreover, the pods of NT plants showed severe withering, and most of the pods failed to set normal seeds. All the evidences in the study clearly suggested that overexpression of the AtABF3 gene conferred drought and salt tolerance in major crop soybean, especially under the growth condition of low watering.

• 산업식품공학
• /
• 제21권4호
• /
• pp.312-317
• /
• 2017

감모율에 영향을 주는 인자를 파악하고 온습도 변화, 제상수, VPD방법을 이용해 감모율을 예측하였으며 실제 감모율과 비교분석을 진행하였다. 저장고 내부의 습도변화를 이용하여 예측한 결과 질소주입과정보다 유닛쿨러의 운전과정에서 발생하는 응축 결상 수분배출 과정이 지배적인 영향을준다. 또한 온습도를 이용한 감모율 예측방법이 실제 감모율과 가장 근사값을 나타냈다. 제상수를 이용해 예측한 결과 감모량은 유닛쿨러의 운전율이 높아질수록 많아졌으며 온습도를 이용한 예측방법보다 운전특성에 따른 감모율 변화가 더 뚜렷하게 나타났다. 이때 유닛쿨러의 운전율은 외기온도와 비례하였으며, 저장고 내부에서 응축된 수분량의 계측이 어렵기 때문에 실제 감모율과 오차가 발생한 것으로 보인다. VPD를 이용한 감모율 예측은 증산계수(K-value)의 영향이 지배적이며, 보고되어진 본 연구에서 이용한 후지사과의 증산계수값(42)에 대한 검증이 필요하다. 본 연구에서 후지사과의 K-value를 30으로 수정하였을 때 가장 근사한 예측값을 계산할 수 있었다.

• 한국작물학회지
• /
• 제4권1호
• /
• pp.93-95
• /
• 1968

대두의 엽면적은 수량과 높은 상관관계가 있고 그의 간이측정법은 매우 의의 깊은 일이므로 포장에서 생체대로엽면적을 측정할 수 있도록 간이측정법을 고안하였다. 대두의 3개품종 감안, 동산 006, patten을 재료로 절위별로, 규소엽과 측소엽별로 엽면적과 엽장, 최대엽폭과의 관계를 조사, 실험하였으며 총공시엽수는 2246매이었다. 대두의 규소엽의 면적은 (엽장${\times}$ 최대엽폭)${\times}$0.658, 측소엽의 면적은 (엽장 ${\times}$ 최대엽폭)${\times}$ 0.683에 의해서 구할수 있음을 알았다. 즉, 규소엽장에 최대엽폭을 곱한 적에 수수 0.683를 곱합음로써 전처리구에서 planimeter에 의한 엽면적과 높은 상관관계를 보였고 이때의 상관계수 r의 평균은 0.994이었다. 그리고 측소엽장에 최대엽폭을 곱한 적에 계수 0.683을 곱함으로써 전처리구에서 planimeter에 의하여 구한 엽면적과 높은 상관관계를 보이고 또한 상관계수 r의 평균은 0.996이였다. 이방법에 의하면 시간과 노력을 크게 절감시킬수 있을 뿐만아니라 생체대로 쉽게 엽면적을 구할수 있는 이점이 있다.

• 기술사
• /
• 제2권5호
• /
• pp.4-18
• /
• 1969

This experiment was conducted, making use of the "NONG-RlM 6", a recommended variety of rice for year of 1968. Main purposes of the experiment are to explore possibilities of: a) ways and means of saving irrigation water and, b) overcoming drought at the same time so that an increased yield in rice could be resulted in. Specifically, it was tried to determine the effects of the circulation irrigation method combined with differentiated thickness of lining upon the growth and yield of rice. Some of the major findings are summarized in the following. 1) The different thicknesses show a significant relationship with the weight of 1,000 grains. In the case of 9cm-lined plot, the grain weight is 23.5 grams, the heaviest. Next in order are 3cm-lined plot, 6cm-lined plot, control plot, and wheat straw lined-plot. 2) In rice yield, it is found that there is a considerably moderate significant relationship with both the different thickness of lining and the number of irrigation, as shown in the table. 3) There is little or no difference among different plots in terms of a) physical and chemical properties of solid, b) quality of irrigation water, c) climatic conditions, and rainfalls. 4) It is found that there is a significant relationship between differences in the method of rotation irrigation and the number of ears per hill. The plot irrigated at an interval of 7 days shows 17.4 ears and the plot irrigated at an interval of 6 days, 16.3. 5) In vinyl-treated plots, it is shown that both yield and component element are greatest in the case of the plot with hole of 3$cm/m^2$. Next in order are; the plot with a hole of 2$cm/m^2$; the plot with a hole of 1$cm/m^2$. In the case of the plot with no hole, it is found that both yield and component elements are decreased as compared to the control plot. 6) The irrigation water requirement is measured for the actual irrigation days of 72 which are the number subtracted the days of rainfall of 30 from the total irrigation days of 102. It is found that the irrigation water requirement for the un control plot is 1,590 mm, as compared to 876 mm (44.9% saved) for the 9cm-lined plot, 959mm(39.7% saved) for the 6cm-lined plot, 1,010mm (36% saved) for the 3cm-lined plot, and 1,082mm (32% saved) for the wheat straw lined plot. In the case of the rotation irrigation method, it is found that the water requirement for the plot irrigated at an interval of 8 days is 538mm (65.3% saved), as compared to 617mm (61.1% saved) for the plot irrigated at an interval of 7 days, 672mm (57.7% saved) for the plot irrigated at an interval of 6 days, 746mm (53.0% saved) for the plot irrigated at an interval of 5 days, 890mm (44.0% saved) for to plot irrigated at an interval of 4 days, and 975mm (38.6% saved) for the plot irrigated at an interval of 3 days. 7) The rate of evapo-transpiration is found 2.8 around the end of the month of July, as compared to 2.6 at the begining of August, 3.4 around the end of August, and 2.6 at the begining of September. 8) It is found that the saturaton quantity of 30 mm per day is decreased to 20mm per day through the use of vinyl covering. 9) The husking rate shows 75 per cent which is considered better.