• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2017.06a
• /
• pp.131-132
• /
• 2017

본 논문에서는 차세대 ATSC 3.0 표준 기반 단일주파수망 (Single frequency network, SFN) 지상파 방송시스템에서의 송신기 식별 (Transmitter identification, TxID) 기술을 살펴보고 그 성능을 분석한다. SFN 기반 지상파 방송은 복수의 송신기를 동일한 주파수 대역에서 운용하는 것에서 발생하는 간섭으로 인한 영향을 최소화하기 위해 적절한 망 설계를 필요로 한다. 용이한 망 설계를 위해, ATSC 3.0 물리계층 표준은 TxID 기술을 통해 개별 송신기에서 전송된 신호를 판별할 수 있도록 지원한다. 이에 본 논문에서는 ATSC 3.0 표준에서 지원하는 TxID 신호 생성 및 검출 기술을 소개한다. 더불어, 전산 실험을 통해 해당 TxID 기술의 식별 성능이 TxID 신호의 삽입 준위가 매우 낮은 환경에서도 보장됨을 확인한다.

• ETRI Journal
• /
• v.34 no.2
• /
• pp.168-174
• /
• 2012

In Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) systems, additional very low-rate data can be transmitted by modulating the amplitude and polarity of the transmitter identification (TxID) signal. Although the additional data transmission scheme offers reliable transmission and has a very large coverage area, it has a limitation on the data rate. In this paper, we propose a novel additional data transmission scheme based on the TxID sequences of the ATSC DTV system and Walsh modulation. The proposed scheme not only increases the data rate significantly, but also offers a virtually identical coverage area compared to a conventional scheme.

• Journal of Broadcast Engineering
• /
• v.12 no.3
• /
• pp.266-277
• /
• 2007

Recently, Transmitter Identification(TxID) technology has been issued as a technology of ATSC DTV. ATSC DTV networks are comprised of a plurality of transmitters, broadcasting the same signal sing one frequency network(SFN) connected to EDOCR. In this single frequency network, TxID technology has been recognized as a technology in the ATSC DTV system since it enables the broadcast authorities and classify multiple transmitters. However, conventional TxID uses extremely long spreading sequence to identifying transmitters, so it increases H/W complexity and registers. Thus, to solve those hardware problems, we propose an efficient signal processing technology using decimation algorithm. Furthermore, we certified the availability of the proposed algorithm via various simulations.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.571-577
• /
• 2000

This paper is designed for the identification system of the train using RFID(radio Frequency Identification) in the 134.2㎑. The reader of transmitter transmits an interrogation signal to the tag, then the tag of receiver retransmits the defined data to the reader after receiving the interrogation signal from it. The system is also applied to the reflection communication as a backscatter modulation and selected the passive Pouter system which does not need an active electrical power device. It is useful that ore can effectively manage and control of the information of train such as materials loaded in the train. We make the reader of the identification system for the train which can communicate with the tag installed under the train.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.5
• /
• pp.123-127
• /
• 2009

In this paper, we suggested new additional data transmission technology for T-DMB system using MOK-SS(Mary Orthogonal Keying- Spread Spectrum)mapping method. We applied revised watermarking method of TxID(Transmitter Identification) technology mainly had been used for conventional ATSC-DTV(Advanced Television Systems Committee - Digital TV). And proposed schemes enhanced additional data rate using MOK-SS mapping method. We certified availability of our proposed technology by using various simulation and error rate performance analysis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.51 no.2
• /
• pp.178-186
• /
• 2018

A chirp-echo data acquisition and processing system was developed for use as a simplified, PC-based chirp echo-sounder with some data processing software modules. The design of the software and hardware system was implemented via a field-programmable gate array (FPGA). Digital signal processing algorithms for driving a single-channel chirp transmitter and dual-channel receivers with independent TVG (time varied gain) amplifier modules were incorporated into the FPGA for better real-time performance. The chirp-echo data acquisition and processing system consisted of a notebook PC, an FPGA board, and chirp sonar transmitter and receiver modules, which were constructed using three chirp transducers operating over a frequency range of 35-210 kHz. The functionality of this PC-based chirp echo-sounder was tested in various field experiments. The results of these experiments showed that the developed PC-based chirp echo-sounder could be used in the acquisition, processing and analysis of broadband acoustic echoes related to fish species identification.

• Journal of Institute of Control, Robotics and Systems
• /
• v.18 no.10
• /
• pp.934-939
• /
• 2012

This paper proposes a new algorithm for ultrasonic sensors arranged on ring frame to identify obstacles surrounding itself by TOFs (time of flight). The ring frame has multiple channels consisting of a transmitter and a receiver. When the transmitter of a selected channel transmits ultrasonic signal, the TOFs of reflected signals from obstacles are acquired by the receiver of the channel. The process continues for all channels consecutively. Then, by using parabolic curve fitting of TOFs of all channel, the proposed algorithm not only calculates distances from multiple obstacles, but also identifies if the shape of obstacles are point or plane by the coefficients of the curve. By the experiment using 16 ultrasonic transceivers on the ring frame in the environment of two poles and two planes, we show the feasibility of the proposed scheme.

• Journal of Broadcast Engineering
• /
• v.16 no.1
• /
• pp.64-72
• /
• 2011

In a Single Frequency Network (SFN) for Advanced Television Systems Committee (ATSC) terrestrial digital television (DTV) system, the interferences induced by the multiple transmitters and/or repeaters using same frequency are unavoidable. To ease the interference handing in the SFN for ATSC DTV system, transmitter identification (TxID) signal is recommended in the ATSC terrestrial DTV system. The TxID signal is embedded in the ATSC DTV signal and transmitted from each transmitter and repeater within the SFN and in ATSC recommended practice (RP) A/111, Kasami sequence is recommended as the TxID signal. In this paper, we propose an additional data transmission scheme using the TxID signal. In the proposed scheme, the Kasami sequence not only acts as the conventional TxID of the SFN for ATSC terrestrial DTV system but also carriers the additional data bits on its polarity and the code phase.

• Journal of Broadcast Engineering
• /
• v.15 no.1
• /
• pp.14-28
• /
• 2010

This paper considers technological requirements to broadcast digital television signals using distributed frequency network (DFN) in the advanced television systems committee (ATSC) transmission system and proposes distributed translator (DTxR) to meet such requirements. In the DFN, DTxR uses different frequency from main transmitter, but same among DTxRs. In addition, this paper introduces digital signal processing (DSP) techniques, which consist of demodulation, equalization, transmitter identification (TxID) generation and insertion, and modulation, to implement DTxR.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.27 no.1
• /
• pp.69-75
• /
• 2023

Small communication devices used in the Internet of Things are vulnerable to various hacking because they do not apply advanced encryption techniques due to their low memory capacity or slow computation speed. In order to increase the authentication reliability of small-sized transmitters operating in 433MHz band, we introduce an RF fingerprint and adopt a convolutional neural network (CNN) as a classification algorithm. The preamble signal transmitted by each transmitter are extracted and collected using software-defined-radio to constitute a training data set, which is used for training the CNN. We tested identification of 20 transmitters in four different scenarios and obtained high identification accuracy. In particular, the accuracy of 95.8% and 92.6% was obtained, respectively in the scenario where the test was performed at a location different from the transmitter's location at the time of collecting training data, and in the scenario where the transmitter moves at walking speed.