• 한국화재소방학회논문지
• /
• 제32권4호
• /
• pp.42-49
• /
• 2018

본 연구에서는 건축음향시뮬레이션을 통하여 재실자에게 비상방송 설비에서 발생되는 비상 방송음이 명확하게 전달되는지를 알아보기 위하여 장방형 복도를 대상으로 NFSC 202의 기준에 따라 25 m 간격으로 비상 방송용 확성기가 설치되었을 때 건축마감재료 변경에 따라 음압레벨, 음성명료도 지표를 비교분석하였다. 마감재료로 흡음특성이 낮은 재료를 적용한 경우 충분한 음압 레벨은 확보할 수 있었지만, 재실자가 비상 방송음을 알아듣기 매우 어려운 수준의 음성명료도를 보였다. 마감재료로 흡음재료를 적용함에 따라 음성 명료도, 음성 전달 지수는 재실자가 잘 알아들을 수 있는 수준으로 개선이 가능한 것으로 나타났지만 재실자에게 전달되는 음압 레벨이 감소되며 같은 공간 내 레벨 차이가 크게 발생되는 것으로 나타났다. 따라서 흡음재료를 사용하여 음성명료도를 확보하고자 할 경우 고른 음압 레벨 분포를 확보하기 위하여 비상 방송용 확성기를 설치간격 조정 등이 필요한 것으로 나타났다.

• Composites Research
• /
• 제35권3호
• /
• pp.196-200
• /
• 2022

Split Hopkinson Pressure Bar (SHPB)은 일반적으로 금속 또는 복합 소재와 같은 고강성 재료의 높은 변형률 속도하에서의 기계적 물성을 평가하기 위해 사용되어왔다. 그러나, 시편이 연한 플라스틱 소재의 경우, 시편 고정 및 형상, 동적 응력 평형 도달, 약한 전달 신호 측정으로 어려운 부분이 있다. 본 연구에서는 연성 플라스틱 재질의 고속 인장 응력-변형률 거동을 측정하기 위하여 입력봉의 재질, 홀더 및 시편의 형상 변경 등 SHPB 장비를 개선 설계하였다. 결과적으로 SHPB에서 인장 응력과 변형에 대한 결과를 얻을 수 있었다. 또한 SHPB에서 얻은 변형률 데이터의 검증을 위해 시편을 초고속카메라로 촬영하여 DIC 기법을 통해 얻은 변형률 데이터와 비교 진행하였다.

• 한국정보통신학회논문지
• /
• 제26권10호
• /
• pp.1469-1476
• /
• 2022

최근 심전도 (ECG) 및 광전용맥파 (PPG) 신호를 사용하여 혈압을 추정하는 많은 연구가 이루어지고 있다. 본 논문에서는 1차원 합성곱 신경망을 사용하여 실시간으로 혈압을 추정하고 모니터링 할 수 있는 모바일 시스템을 설계하고 구현하였다. 제안하는 신경망 알고리즘은 ECG 및 PPG 신호의 다양한 특징을 세밀하게 추출하도록 11개의 계층으로 구성하고 매개변수를 최적화하도록 설계되었다. 모의실험 결과는 학습한 신경망의 합성곱 커널의 개수가 많을수록 ECG 및 PPG 신호의 특성을 더 잘 나타내기 때문에 선형 회귀 모델보다 평균 제곱 오차가 적어져 더 좋은 성능을 나타내는 것으로 분석되었다. 본 연구에서 개발된 모바일 시스템은 몸에 부착된 ECG 및 PPG 센서 장치로부터 블루투스 통신으로 전송된 측정 신호를 입력받고 실시간으로 학습된 모델로 수축기 및 이완기 혈압 수치를 추정하고 그래프로 표시하게 된다.

• 한국터널지하공간학회 논문집
• /
• 제5권4호
• /
• pp.337-348
• /
• 2003

밀장전한 암반 발파공에서 화약 폭발시 발생하는 고압의 폭굉압력 전파메카니즘을 충격파 이론을 적용하여 규명하고 전달된 발파압력 산정식을 유도하였다. 유도된 발파압력 산정식은 폭굉파속도, 단열지수, 화약밀도, Hugoniot 상수, 암반밀도의 함수였다. 에멀젼 화약과 서울 화강암의 특성시험을 시행하여 각 특성치의 확률분포를 정의하고 발파압력 산정식에 적용하여 발파압력의 확률분포를 산출하였다. 화약 특성치와 암반 특성치의 확률분포는 정규분포를 나타냈으며 따라서 발파압력의 확률분포도 정규분포로 추정되었다. 발파압력에 대한 매개변수분석을 시행한 결과 폭굉파속도가 발파압력에 가장 크게 영향을 미쳤다. 또한 이런 특성치의 불확실성이 발파압력의 불확실성에 미치는 영향을 분석하였다. 분석결과 암반특성치의 불확실성이 화약특성치보다 더 크게 영향을 미쳤다. 비록 매개변수분석에서 폭굉파속도가 발파압력에 가장 크게 영향을 미치는 요소이지만 암반특성치의 불확실성이 폭굉파속도의 불확실성보다 더 크기 때문에 발파압력은 후자보다 전자에 의해서 더 크게 영향을 받는다.

• 대한인간공학회지
• /
• 제32권4호
• /
• pp.345-353
• /
• 2013

Objective: This research measured physiological and psychological effects of Vibroacoustic stimulation(VA) to scapular and sacrum of supine position on the mattress. Background: When vibroacoustic stimulation applies to human body, it has a positive influence on physiological and psychological effects by stimulating the organs, tissues and cells of whole body. Method: This experiment was conducted to 10 normal males in two conditions: no stimulation and vibroacoustic stimulation. No stimulation experiment was executed as a supine position for 30 minutes without any vibrational stimulus, while vibroacoustic stimulation was transmitted by the vibrational speaker, which uses 40Hz frequency. Subjects had a laser Doppler flowmeter probe in scapular, sacrum, and also had 8 channel electroencephalogram(EEG) measurement sensor in the scalp. Blood pressure and skin temperature were measured in two conditions with an underlying posture for 30 minutes. Additionally, blood flow rate and EEG were measured before and after for two minutes on two conditions. Results: According to the vibroacoustic stimulation, blood flow rate and skin temperature were increased, while blood pressure was decreased. When using vibroacoustic stimulation compared to no stimulation, blood flow rate went approximately two times higher, and skin temperature also higher 3~4 times. Furthermore, the relative alpha power of brain wave was significantly increased when we applied to vibroacoustic stimulation. Conclusion: This experiment tested the VAT embedded in mattress in two conditions. According to this experiment, VAT decreases blood pressure, improves not only a physiological effect on blood flow rate as well as skin temperature, but also psychological functions by increasing relative alpha power. Application: The results of the publishing trend analysis might help physiological and psychological effects of vibroacoustic stimulation.

• Design & Manufacturing
• /
• 제17권1호
• /
• pp.56-63
• /
• 2023

In this study, the vibration signal of the mold was measured and analyzed to monitor the process information and characteristics during the press molding process. A necklace-type picture frame mold was used for press molding, and the vibration signal was measured by GY-61 acceleration sensor module attached to the surface of the upper (movable) mold base. The change of the vibration signal of the mold according to press speed was analyzed. As a result, the vibration signal had a large change at five sections: "Holder contact", "Punch contact and start of pressing", "End of pressing", "Mold open", and "Demolding". The time difference between "Punch contact and start of pressing" and "End of pressing" means the pressing time which is the actual time the material is molded under pressing pressure. The time intervals for each section, represented by the time interval between "Holder contact" and "Punch contact and start of pressing", can be used to compare and evaluate the press speed applied to the process. By comparing the vibration signals at 60 rpm and 90 rpm, the amplitude at the section of "Punch contact and start of pressing" increased as the press speed increased. This result means that as the press speed increases, more force and pressure is applied to the material. Also, the peak values of the other sections were found to increase as the press speed increased. It was found that the pressing time, the time interval between "Punch contact and start of pressing" and "End of pressing", decreases as the pressing speed increases. Similarly, press speed factor, the time interval between "Holder contact", and "Punch contact and start of pressing", is found to be shorter. Therefore, based on the result of this study, the pressing time, press speed, pressing(punching) pressure of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process information and characterization can be evaluated as the change of the mold vibration during press molding.

• Design & Manufacturing
• /
• 제14권3호
• /
• pp.8-16
• /
• 2020

In this study, the vibration signal of the mold was measured and analyzed to monitoring the process time and characteristics during injection molding. A 5 inch light guide plate mold was used to injection molding and the vibration signal was measured by MPU6050 acceleration sensor module attached the surface of fixed mold base. Conditions except for injection speed and packing pressure were set to the same value and the change of the vibration signal of the mold according to injection speed and packing pressure was analyzed. As a result, the vibration signal had a large change at three points: "Injection start", "V/P switchover", and "Packing end". The time difference between "injection start" and "V/P switchover" means the injection time in the injection molding process, and the time difference between "V/P switchover" and "Packing end" means the packing time. When the injection time and packing time obtained from the vibration signal of the mold are compared with the time recorded in the injection molding machine, the error of the injection time was 2.19±0.69% and the error of the packing time was 1.39±0.83%, which was the same level as the actual value. Additionally, the amplitude at the time of "injection start" increased as the injection speed increased. In "V/P switchover", the amplitude tended to be proportional to the pressure difference between the maximum injection pressure and the packing pressure and the amplitude at the "packing end" tended to the pressure difference between the packing pressure and the back pressure. Therefore, based on the result of this study, the injection time and packing time of each cycle can be monitored by measuring the vibration signal of the mold. Also, it was confirmed that the level and trend of process variables such as the injection speed, maximum injection pressure, and packing pressure can be evaluated as the change of the mold vibration during injection molding.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.206-212
• /
• 2004

It is necessary to consider the stability, economic environmental-friendly problems by the development of the road, supply of the automobile, environmental problem as designing the exhaust system. To reduce the noise and the vibration of the automobile, it is needed to consider the pulsation noise, air current noise, vibration of air pipe which generate the intake and exhaust noise of the automobile. Moreover, the discharge sounds, intake sound, radiation sound, transmitted sound are occurred. To reduce this influence, the variable valve is needed and to control these factors, path transformation muffler and active type muffler are needed. While engine efficiency could be reduced with this transformationand resistance by the pressure, thermal property. In this study, how to design exhaust systems yielding higher condversion efficiency, lower backpressure and optimize the performance. this study is recommended for exhaust system and designers and engineers involved in SI engine exhaust system and it will furnish information for you to design more efficient.

• 화약ㆍ발파
• /
• 제35권2호
• /
• pp.9-17
• /
• 2017

휘트스톤 브리지(Wheatstone bridge)는 변형률 게이지의 극도로 작은 저항 변화를 측정하는 데 널리 사용되는 중요한 전기회로의 하나이다. 변형률 게이지는 변형을 측정하고자 하는 구조물이나 시편에 부착한다. 휘트스톤 브리지는 다양한 공학재료에 대한 정적 혹은 동적 강도를 시험하는 분야에서 많이 사용되고 있다. 일례로, 스플릿 홉킨슨 압력봉(split Hopkinson pressure bar) 시스템에서 브리지 회로는 응력파가 전파되는 입사봉과 전달봉의 동적 변형률을 측정하는 데 필수적으로 사용된다. 본고에서는 암석동역학과 연관된 실험실 실험에서 쉽게 참고할 수 있도록 휘트스톤 브리지 회로의 원리를 상세히 설명하였다. 특히, 쿼터(quater), 하프(half) 및 풀(full) 브리지의 회로배열을 그 기본적인 용도와 함께 자세히 소개하였다.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.5-13
• /
• 2017

Noise complaints among neighbors in apartment building are mainly caused by floor impact noise that is structure born noise due to occupant induced floor vibration. To control this noise problems many researchers have investigated floor systems and finishing materials. Light-weight impact noise affects by finishing materials, but heavy-weight impact noise induced by heel impacts during normal walking or jumping of children is concerned with structural system and floor vibration. To figure out the characteristics of floor impact noise and transmission of floor vibration due to human activities, vibration tests were conducted in apartment buildings. Impact hammer, heel drop and walking activities were loaded at center of upstairs living room, and accelerations of slabs for both upstairs and downstairs and sound pressure levels for downstairs were measured. The acceleration ratio of transmitted floor vibration to downstairs and human induced vibration in upstairs was between 0.5 and 1.0 according to slab size, wall, and load type. And floor impact noise occurred in the range of natural frequency of slab.