• 한국정보통신학회논문지
• /
• 제9권1호
• /
• pp.160-164
• /
• 2005

자동차 번호판 자동인식에서 어두운 조명에서나 날씨가 좋지 않을 경ㅇ 차량의 형상이 왜곡 될 수 있고, 번호판을 식별하는데 어려움이 있다. 이에 본 논문에서는 움직이는 차량의 영상에서 흔들림이 없고, 밝은 햇빛에서 어두운 조명상태까지의 다양한 환경을 수용할 수 있는 자동차 번호판 인식방법을 제안하였다. 제안한 방법은 투시광선을 서로 다른 세기를 갖는 두 개의 빔(beam)으로 분리한 다음 CCD 카메라를 사용하여 두 개의 포착된 이미지를 조합하여 물체가 움직일 때도 동요 없는 이미지를 산출하였다. 실험결과로써 466 개의 움직이는 차량영상을 이용한 결과 98.7%의 인식률을 얻을 수 있었다.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.123-130
• /
• 2008

A 3D structure production method for microstereolithography is a useful way that produces complex structures with flexible processes and low cost. Several UV curable resins were blended and the optimal resin for micro-lens fabricate was selected through viscosity, workability and transmission tests. It consists of 1, 6 - Hexanediol diacrylate with 15 Apha and Isobornyl acrylate for reducing some shrinkage. When fabricating a micro-lens array on large surface, some distortion of shape occurred because of the surface tension between cured part. To overcome this problem, the optimal processing conditions were derived from considering amount of the resin and surface tension. Large surface Micro-lens array, which are a type of elliptical convex and consist of 18,000 micro-lens in the range of 2cm*2cm were fabricated. The focal length to the X-axis and Y-axis were calculated. To verify the performance, measure an energy distribution of transmitted light from the Large surface Micro-lens array.

• 한국소음진동공학회논문집
• /
• 제27권1호
• /
• pp.5-13
• /
• 2017

Noise complaints among neighbors in apartment building are mainly caused by floor impact noise that is structure born noise due to occupant induced floor vibration. To control this noise problems many researchers have investigated floor systems and finishing materials. Light-weight impact noise affects by finishing materials, but heavy-weight impact noise induced by heel impacts during normal walking or jumping of children is concerned with structural system and floor vibration. To figure out the characteristics of floor impact noise and transmission of floor vibration due to human activities, vibration tests were conducted in apartment buildings. Impact hammer, heel drop and walking activities were loaded at center of upstairs living room, and accelerations of slabs for both upstairs and downstairs and sound pressure levels for downstairs were measured. The acceleration ratio of transmitted floor vibration to downstairs and human induced vibration in upstairs was between 0.5 and 1.0 according to slab size, wall, and load type. And floor impact noise occurred in the range of natural frequency of slab.

• 한국안광학회지
• /
• 제4권2호
• /
• pp.57-63
• /
• 1999

소의 수정체의 광투과, 흡수 Spectrum을 Spectrophotometer로 200-800nm 영역에서 측정하였다. 자외선 A-B선 모두 흡수되고 400nm 영역에서 광투과 edge가 나타나고, edge 영역보다 큰 파장에서는 완전투과형 filter가 되었다. 특히 $4^{\circ}C$-$60^{\circ}C$온도에서 광흡수 투과율의 온도조성은 없었다. 박막 설계로부터 long-pass edge filter형인 $n_0/(0.5H)L(LH)^6(0.5H)/n_s$와 $n_0{\mid}(0.5LH0.5L)^kL/1.25{\mid}4.0$ 박막 구조가 소의 수정체 광투과 Spectrum과 일치함을 알 수 있었다. 인공수정체, 안내렌즈의 설계시 박막구조 설계를 추가함으로써 자외선 차단 역할을 할 수 있다.

• 한국통신학회논문지
• /
• 제41권4호
• /
• pp.454-460
• /
• 2016

광학 카메라 통신(OCC, Optical Camera Communication)은 기존의 광다이오드 기반 가시광통신(VLC)과는 다르게 카메라를 수신부로 사용하여 데이터를 수신한다. 특히, 카메라의 CMOS 이미지 센서의 셔터 동작방식인 롤링셔터의 원리를 이용하면 픽셀별로 다른 신호를 수신할 수 있으므로 데이터 속도를 개선할 수 있다. 본 연구에서는 카메라의 CMOS 이미지 센서를 사용하여 LED로부터 송신되는 고속 데이터의 이미지를 실시간으로 획득하고 이를 처리할 수 있는 알고리즘을 제안하였으며, 실험을 통해 성능을 검증하였다.

• 제어로봇시스템학회논문지
• /
• 제18권5호
• /
• pp.453-464
• /
• 2012

This is a research of an adaptive longitudinal control system for situated cognition in wide range, traffic accidents reduction and safety driving environment by integrated system which graft a road infrastructure's information based on IT onto the intelligent vehicle combined automobile and IT technology. The road infrastructure installed by laser scanner in intersection, speed limited area and sharp curve area where is many risk of traffic accident. The road infra conducts objects recognition, segmentation, and tracking for determining dangerous situation and communicates real-time information by Ethernet with vehicle. Also, the data which transmitted from infrastructure supports safety driving by integrated with laser scanner's data on vehicle bumper.

• 한국분무공학회지
• /
• 제2권4호
• /
• pp.29-35
• /
• 1997

Liquid film thickness is measured by $moir\acute{e}$ topography which monitored liquid surface. $Moir\acute{e}$ fringe measurement techniques share the inherent simplicity found in optical interferometric techniques have the advantage of use over a greater range of displacement. $Moir\acute{e}$ fringe are the geometric interference patterns observed when two dense line grating are superposed. Light transmitted through a fixed line grating is deviated by the liquid film surface, producing a distored image of the grating. The $moir\acute{e}$ fringe produced by projection of this optically distored grating onto a second stationary grating permit visualization of the liquid surface and measurement of the liquid film thickness. This study measured the small amplitude of liquid film thickness to the $moir\acute{e}$ fringe pattern produced when spherical metal was dropped glycerin put)1 And the measurement of liquid film thickness flowing down an inclined plate are required to calculate the liquid slope in a position.

• 동력기계공학회지
• /
• 제19권3호
• /
• pp.11-15
• /
• 2015

In this paper, the multi-point hydrogen detection system based on the combination of the hetero-core optical fiber SPR hydrogen tip sensor and interrogator by pseudorandom noise (PN) code correlation reflectometry has been developed. In a light intensity-based experiment with an LED operating at 850 nm, it has been presented that a transmitted loss change of 0.32dB was induced with a response time of 25 s for 4% $H_2$ in $N_2$ in the case of the 25-nm Au, 60-nm $Ta_2O_5$, and 5-nm Pd multi-layers film. The proposed sensor characteristic shows excellent reproducibility in terms of loss level and time response for the in- and out- $H_2$ action. In addition, in the experiment for multi-point hydrogen detection, all sensors show the real-time response for 4% hydrogen adding with reproducible working. As a result, the real-time multi-point hydrogen detection could be realized by means of the combination of interrogating system and hetero-core optical fiber SPR hydrogen tip sensors.

• 한국도서관정보학회지
• /
• 제29권
• /
• pp.105-140
• /
• 1998

This is a way of establishing the information sovereignty in the industrial knowledge of society. The occurrence of the industrial knowledge of society builds knowledge and information as digital system. Digitalized knowledge and information has some characteristics of which the information should be light and variable, so that it can be transmitted rapidly. At this moment, if information super highway is built, and the digitalized information of the advanced information country comes to us, we are to get easily information dependence unless we are ready. Nowadays, our country is accepting the knowledge and information of the advanced information countries without filtering it properly. What is the reason? This means that we are lack of traditional knowledge resourses as the foundation of digital system. This paper deals with (1) the historical reason of the lackness of the traditional knowledge resourses, (2) the aspect of the consumer culture about knowledge and information, and (3) the aspect of the production culture about the knowledge and information. In order to overcome the information dependence, in this paper, we should change both production and consumption of our knowledge and information into a new pattern, establish the seed knowledge resourses, and build libraries everywhere we can use easily. For this case study, this paper takes examples of maeul (which may mean traditional villiage in Korea.) libraries on Changwon City.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2000년도 THE THIRD INTERNATIONAL CONFERENCE ON AGRICULTURAL MACHINERY ENGINEERING. V.II
• /
• pp.300-306
• /
• 2000

This paper introduces a new concept of automation for bio-production with tele-operative system. The proposed system showed practical and feasible way of automation for the volatile bio-production process. Based on the proposition, recognition of the job environment with object identification was performed using computer vision system. A man-machine interactive hybrid decision-making, which utilized a concept of tele-operation was proposed to overcome limitations of the capability of computer in image processing and feature extraction from the complex environment image. Identifying watermelons from the outdoor scene of the cultivation field was selected to realize the proposed concept. Identifying watermelon from the camera image of the outdoor cultivation field is very difficult because of the ambiguity among stems, leaves, shades, and especially fruits covered partly by leaves or stems. The analog signal of the outdoor image was captured and transmitted wireless to the host computer by R.F module. The localized window was formed from the outdoor image by pointing to the touch screen. And then a sequence of algorithms to identify the location and size of the watermelon was performed with the local window image. The effect of the light reflectance of fruits, stems, ground, and leaves were also investigated.