• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.731-736
• /
• 2004

The exhaust noise of auxiliary engine in ships is directly transmitted to bridge wing with only distance attenuation. It is not easy to find out practical treatment to be applied between exhaust pipe and bridge wing to reduce the transmission of the exhaust noise. In general, therefore, a silencer is fitted to reduce the exhaust noise and correspondingly noise of bridge wing. The silencer should be properly designed under the consideration of the frequency component of the exhaust noise and the required performance such as noise reduction or insertion loss. In general, the gas inside the exhaust pipe flows with high temperature and speed and thus onboard test condition is more adverse than the standard atmospheric condition. In this study, the test method to evaluate silencer performance using a probe microphone is introduced.

• Journal of the Korean Physical Society
• /
• 제73권9호
• /
• pp.1225-1229
• /
• 2018

The Drosophila auditory system consists of four large basal segments: the arista, the funiculus, the pedicel, and the scape. When an acoustic stimulus is applied to the arista and the funiculus their mechanical vibrations are transmitted to chordotonal neurons in Johnston's organ where mechanoelectric transduction arises. We study the mechanotransduction mechanism in the Drosophila auditory system by using a laser Doppler vibrometer (LDV) and extracellular electrophysiology. We find that large and small peaks appear alternatively and that the antenna vibration is asymmetric depending on whether the pedicel and the scape are fixed. Interestingly, we find that this asymmetric vibration accompanies the alternating neural peak structure. Here, we propose a mathematical model to explain the alternating peak structure by using a model consisting of two opposing neurons that are modeled as strings. Generally, strings have tension only when they are elongated. This property allows the alternating neural peaks for asymmetric antenna motion.

• 대한임베디드공학회논문지
• /
• 제14권3호
• /
• pp.143-150
• /
• 2019

In this paper, we have developed a module that prevents a driver from using mobile phone while driving. The module is equipped with a vibration sensor to determine if the vehicle is running, a BLE module to transmit the status of the module and a speaker to transmit audible/unaudible sound to the mobile terminal where GUI application is installed. If the vehicle is judged to be moving, the application is activated and the touch function of the mobile phone is blocked. Other data are also transmitted depending on the state of the module, which informs forced module removal, battery failure, or sleep mode of the module.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1355-1362
• /
• 2022

Nuclear fuel, including its fresh state, must be handled safely due to its critical and hazardous nature. Under normal transport conditions, several interactions take place among different components, such as transport cask used for loading the nuclear fuel and tie-down structure to attach with the vehicle. To ensure structural integrity of the nuclear fuel, vibrations and impacts transmitted from the vehicle must be sufficiently reduced. Therefore, in this study, we conducted two transportation tests from Daejeon to Kijang in Korea to verify the vehicle-induced vibrational characteristics of the KJRR-F fresh nuclear fuel when transported under normal transport conditions. The speed and location of the vehicle were obtained via GPS, and the accelerations between the vehicle and the KJRR-F fresh nuclear fuel were measured. Additionally, using the acceleration results, a structural analysis was conducted to confirm the structural integrity of the nuclear fuel under the most severe conditions during normal transport.

• 한국산업융합학회 논문집
• /
• 제25권4_1호
• /
• pp.505-511
• /
• 2022

The objective of this article is finding optimized locations of active mounts applied to 6-DOF beam structure with two active paths. When sinusoidal excitation forces are applied to the beam structure, secondary forces from two active mounts which can minimize (ideally becoming zero) transmitted forces are calculated mathematically and the vibration attenuation performance is validated through computer simulations. When the force applied to two active mounts are relatively low, those specific locations are considered as optimized location of active mounting system. As the location of mount changes, amplitude and phase of secondary forces in each path are analyzed with 3D plots. Based on the simulation results, a criterion for selecting mounting location is suggested and it would be very useful for selecting actuators for active mounts appropriately.

• 한국정밀공학회지
• /
• 제12권3호
• /
• pp.144-152
• /
• 1995

TV microphonic phenomenon (black patterns overlapped on the image when TV sound is set too high) was studied experimentally. It was found that this phenomenon was due to the vibration generated at speakers, and transmitted to the CRT through the TV cabinet structure. Based on this fact, a simulative study was carried out on the assumption that the vibratory motion of the shadow mask located in the CRT could cause the landing error of electronic beam. The result of the simulation corresponded qualitatively with experi- mentally observed facts.

• 한국정밀공학회지
• /
• 제12권10호
• /
• pp.69-77
• /
• 1995

This laser measurement system has been developed using He-Ne laser and photodiode. The laser beam intensity transmitted on a photodiode was disturbed by eccentrically rotating disk cam with various speeds. The photodiode and an amplifier were used to change the detected beam intensity into voltage. The digitized data through the developed system were recorded on a micro-computer by using a signal analysis program. Its reliability was ascertained by using FFT analyzer. The vibration of rotating disk cam can be analyzed by measureing the intensity change of laser beam which the results by FFT analyzer were similar to. The amplifier was devised to be able to modulate the fluctuations of laser beam. The voltage could be linearly recorded with the change of the laser beam intensity.

• 한국포장학회지
• /
• 제21권3호
• /
• pp.91-96
• /
• 2015

Fruit and vegetables are subjected to complex dynamic stresses in the transportation environment. During a long journey from the production area to customers using parcel delivery service, there is always some degree of vibration present. Vibration inputs are transmitted from the vehicle through the packaging to the fruit. Inside, these cause sustained bouncing of fruits against each other and container wall. These steady state vibration input may cause serous fruit injury, and this damage is particularly severe whenever the fruit inside the package is free to bounce, and is vibrated at its resonance frequency. The determination of the resonance frequencies of the fruit and vegetables may help the packaging designer to determine the proper packaging system providing adequate protection for the fruit, and to understand the complex interaction between the components of fruit when they relate to expected transportation vibration inputs. Instrumentation and technologies are described for determining the vibration response characteristics of the fruits with frequency range 3 to 150 Hz. The resonance frequency of the pear ranged from 53 to 102 Hz and the amplitude at resonance was between 1.08 and 2.48 G. The resonance frequency and amplitude at resonance decreased with the increase of the sample mass, and they were slightly affected by mechanical properties such as bioyield deformation and rupture deformation. Regression analysis was performed among the relatively high correlated parameters from the results of correlation coefficient analysis.

• 한국철도학회논문집
• /
• 제16권1호
• /
• pp.26-31
• /
• 2013

감속구동장치는 모터에 회전력을 차륜에 전달하는 중요한 장치로써 가장 큰 고장원인 중 하나는 기어의 접촉 피로손상에 의한 것이다. 이로 인해 주행 시 심각한 영향을 미칠 수 있기 때문에 주행안전성 확보를 위한 이상진단 모니터링시스템 기술이 요구되고 있으며, 이상진단을 위한 모니터링 시스템 개발을 위해 고장이 없는 감속구동장치의 기초 데이터 분석이 중요하다. 기어의 주요 이상진단방법 중 고장원인파악 및 조기진단에 주로 사용되는 진동신호분석법을 적용하여, 본 논문에서는 고장이 없는 고속철도차량(KTX, KTX II) 감속구동장치를 대상으로 실물시험과 실차시험을 수행함으로써 고장이 없는 감속구동장치의 이상진단에 필요한 진동특성분석을 실시하였다.

• 우주기술과 응용
• /
• 제2권3호
• /
• pp.187-194
• /
• 2022

안테나의 고속 정밀 지향성 확보를 위해 동작되는 모터의 구동에 의한 외란의 크기는 극히 미소함에도 불구하고, 정밀 지향 성능이 요구되는 관측 위성의 영상 품질을 저해하는 주요 원인으로 작용하게 된다. 고해상도 관측위성의 지향 성능 향상을 통한 고해상도 영상정보 획득을 위해서는 지향성 안테나의 모터 구동시 발생하는 미소진동(Jitter)이 주요 임무 장비에 전달되지 않도록 적절한 진동절연 및 저감 설계가 요구된다. 본 논문에서는 실제 위성에 적용된 지향성 안테나 진동저감 장치에 대해 개발과정과 적용 전후의 미소 진동 저감 효과에 대해 살펴보고자 한다. 이 장치는 별다른 인터페이스 추가 장비 없이, 지향성 안테나 구동부 내에 있는 기어 하나만을 스프링 댐퍼 기어 형태로 교체함으로서, 발생되는 지터문제를 획기적으로 개선할 수 있는 방법으로 고안되었으며, 이 방식은 2015년에 발사된 서브미터급 고해상도 지구관측 위성에 처음으로 적용되어 발사되었으며, 현재까지 성공적으로 운용 중에 있다.