• MALSORI
• /
• no.44
• /
• pp.73-82
• /
• 2002

Channel distortion degrades the performance of speech recognizer in telephone environment. It mainly results from the bandwidth limitation and variation of transmission channel. Variation of channel characteristics is usually represented as baseline shift in the cepstrum domain. Thus undesirable effect of the channel variation can be removed by subtracting the mean from the cepstrum. In this paper, to improve the recognition performance of Korea connected digit telephone speech, channel compensation methods such as CMN (Cepstral Mean Normalization), RTCN (Real Time Cepatral Normalization), MCMN (Modified CMN) and MRTCN (Modified RTCN) are applied to the static MFCC. Both MCMN and MRTCN are obtained from the CMN and RTCN, respectively, using variance normalization in the cepstrum domain. Using HTK v3.1 system, recognition experiments are performed for Korean connected digit telephone speech database released by SITEC (Speech Information Technology & Industry Promotion Center). Experiments have shown that MRTCN gives the best result with recognition rate of 90.11% for connected digit. This corresponds to the performance improvement over MFCC alone by 1.72%, i.e, error reduction rate of 14.82%.

• Journal of IKEEE
• /
• v.15 no.3
• /
• pp.235-240
• /
• 2011

The scattered pilots employed in DVB-T take advantage of the merits of both the block type and comb type pilot arrangement to increase the transmission efficiency. To estimate the channel transfer functions for data subcarriers, it is required to conduct time-frequency domain 2D estimation using the pilots. Though 2D Wiener estimator is optimal in sense of MSE (mean square error), it is too complex to implement in hardware. In this paper a new channel estimation method for the scattered pilot based OFDM system by measuring the power of AWGN and removing the noise in the LS (least square) estimate of the channel is proposed. And the simulation results reveal the proposed method outperforms the 2D linear interpolation in the fading channel.

• KEPCO Journal on Electric Power and Energy
• /
• v.8 no.2
• /
• pp.73-77
• /
• 2022

Recently, as the number of years of operation has increased for more than 30 years, interest in evaluating the remaining life of major power facilities such as transformers and ultra-high voltage cables is increasing. In particular, the risk of failure is increasing because the underground transmission XLPE cable has been built since 1980 and has been operating in excess of 30 years of design life or close proximity. Therefore, it is necessary to develop an algorithm to evaluate the residual life of the XLPE cable considering the load to determine the risk of failure. Since load data is large amount of data, it is necessary to make the variable load information equivalent to the time unit first in order to calculate the remaining life of the system quickly. In overseas literature, transformers are reported to be standardized for variable load equivalent conversion formulas, but they have not been reported for ultra-high voltage cables. Therefore, in this paper, whether the equivalent conversion formula of a transformer can be applied to XLPE cables was reviewed through accelerated degradation tests under equivalent and variable temperature conditions, and considerations were studied when evaluating the remaining operating life of XLPE cables based on the experimental results.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.731-734
• /
• 2011

This paper proposed the Low power configuration of Single hop WSN(Wireless Sensor Network) system. When the RF communication is done each tag node during the WSN systems operating, power consumption is greatest. There for, if you configure the Network with the RF communication module turn on/off periodically, power consumption less then operating the module all the time without it toggles. However, some data omissions may occur in which transmission and receipt is done. So this paper proposed the algorithm for low power system without data omissions.

• Journal of Satellite, Information and Communications
• /
• v.9 no.2
• /
• pp.96-100
• /
• 2014

Recently, the management system of wastewater treatment facility has magnified due to the stringent regulations for the protection of the environment, and a sewage treatment plant efficiency and research of the car development are activated in large facilities or industrial park. however, the existing sewerage disposal system and specific water quality monitoring network reliability for real-time transmission of this building is insufficient. In this paper, we proposed a local wireless network design for sludge multi meter data collection and control for measuring the concentration of the sludge efficiently. Also, the collected data over the local wireless network to transmitted to the central monitoring system and accumulate the data in real time to calculate statistics is possible to monitor the status of the sewage treatment facilities. The proposed system uses a short-range wireless networks of IEEE 802.15.4 and configures an IEEE 802.11 network which can monitor real-time status in central system. Also, we install a sludge multimeter and communication network in sewage treatment facilities and confirm the usefulness of the proposed technique by demonstrating its effectiveness.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1387-1394
• /
• 2015

Along with the development of network transmission technology, the IPTV market is growing in fast pace. Additionally the UHD resolution broadcasting system along with user experience (UX) that provides better service to user has attracted attention recently since there are not enough research has been done with differentiated the UX that can enhance the UX yet. Therefore we proposed a low complexity syntax level image stitching implementation technique that run with multi-view services, which makes possibility to view multiple channel or video contents on the screen at the same time. Simulation results have demonstrated the liability and effectiveness of the proposed algorithm by showing that capability of generating more than 80 frames per second by stitching four Full-HD size videos into UHD frame.

• Journal of KIISE:Information Networking
• /
• v.37 no.5
• /
• pp.317-326
• /
• 2010

Nowadays, transmission bandwidth for network traffic is increasing and the type is varied such as peer-to-peer (PZP), real-time video, and so on, because distributed computing environment is spread and various network-based applications are developed. However, as PZP traffic occupies much volume among Internet backbone traffics, transmission bandwidth and quality of service(QoS) of other network applications such as web, ftp, and real-time video cannot be guaranteed. In previous research, the port-based technique which checks well-known port number and the Deep Packet Inspection(DPI) technique which checks the payload of packets were suggested for solving the problem of the P2P traffics, however there were difficulties to apply those methods to detection of P2P traffics because P2P applications are not used well-known port number and payload of packets may be encrypted. A proposed algorithm for identifying P2P heavy traffics based on flow transport parameters and behavioral characteristics can solve the problem of the port-based technique and the DPI technique. The focus of this paper is to identify P2P heavy traffic flows rather than all P2P traffics. P2P traffics are consist of two steps i)searching the opposite peer which have some contents ii) downloading the contents from one or more peers. We define P2P flow patterns on these P2P applications' features and then implement the system to classify P2P heavy traffics.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.6
• /
• pp.39-47
• /
• 1998

A fourth-order $\Sigma$-$\Delta$ modulator is designed and implemented in 0.6 $\mu\textrm{m}$ CMOS technology. The modulator is verified by introducing nonlinear factors such as DC gain and slew rate in system model that determines the transfer function in S-domain and in time-domain. Dynamic range is more than 110 dB and the peak SM is 102.6 dB at a clock rate of 2.8224 MHz for voiceband signal. The structure of a ∑-$\Delta$ modulator is a modified fourth-order ∑-$\Delta$ modulator using direct feedback loop method, which improves performance and consumes less power. The transmission zero for noise is located in the first-second integrator loop, which reduces entire size of capacitors, reduces the active area of the chip, improves the performance, and reduces power dissipation. The system is stable because the output variation with respect to unit time is small compared with that of the third integrator. It is easy to implement because the size of the capacitor in the first integrator, and the size of the third integrator is small because we use the noise reduction technique. This paper represents a new design method by modeling that conceptually decides transfer function in S-domain and in Z-domain, determines the cutoff frequency of signal, maximizes signal power in each integrator, and decides optimal transmission-zero frequency for noise. The active area of the prototype chip is 5.25$\textrm{mm}^2$, and it dissipates 10 mW of power from a 5V supply.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1608-1613
• /
• 2009

All kinds of equipment which used an embedded system is developed, and these are used as to an actual life in developments regarding an embedded field in a lot of sections. Also, we can collect data from all kinds of sensors through wireless sensor networks, look by real time data collected could be brought if only through embedded system. In this paper we present a plan which improve the capabilities of embedded system only act as a gateway by installing embedded database in an embedded system for the sensing data management that was transmitted by radio from sensor nodes. In other words, by installing an embedded database to store and manage data by sensing data can be reduced the transmission frequency to communicate with a host and by performing the filtering program in embedded system and then by transmitting only valid data to the host can be increase the reliability of the analysis results based on data collected.

• Journal of KIISE:Computing Practices and Letters
• /
• v.16 no.3
• /
• pp.331-335
• /
• 2010

Previous low-energy time synchronization methods have mainly focused on reducing the number of transmission or reception packets. However, this paper proposes a method that reduces the percentage of time a node has to be awake (the duty cycle), assuming that a periodic sleep-wake cycle is used to conserve energy. Based on our experience with actual WSN devices, a system model is proposed, and the potential performance of the proposed method, with different parameter values, is analyzed. To further demonstrate the feasibility of our method, experiments were conducted using nine WSN devices in a $3{\times}3$ grid network topology. The results show the average synchronization error is 107.57 $\mu{s}$ in duty cycle 5% and synchronization period 10 sec, and 130 $\mu{s}$ in duty cycle 2.5% and synchronization period 20 sec.