• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.215-217
• /
• 2005

There are two types of packet loss probabilities used in both the network layer and the physical layer within the wireless transmitter such as a queueing discard probability and transmission loss probability. We analyze these loss performances in order to guarantee Quality of Service (QoS) which is the basic of the future network. The queuing loss probability is caused by a maximum allowable delay time and the transmission loss probability is caused by a wireless channel error. These two types of packet loss probabilities are not easily analyzed due to recursive feedback which, originates as a result at a queueing delay and a number of retransmission attempts. We consider a wireless transmitter to a M/D/1 queueing model. We configurate the model to have a finite-size FIFO buffer in order to analyze the real-time traffic streams. Then we present the approaches used for evaluating the loss probabilities of this M/D/1/K queueing model. To analyze the two types of probabilities which have mutual feedbacks with each other, we drive the solutions recursively. The validity and accuracy of the analysis are confirmed by the computer simulation. From the following solutions, we suggest a minimum of 'a Maximum Allowable Delay Time' for real-time traffic in order to initially guarantee the QoS. Finally, we analyze the required service rate for each type utilizing real-time traffic and we apply our valuable analysis to a N-user's wireless network in order to get the fundamental information (types of supportable real-type traffics, types of supportable QoS, supportable maximum number of users) for network design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 제37회 하계학술대회 논문집 A
• /
• pp.10-11
• /
• 2006

The fault location is obtained from the distance relay that detects the fault of the transmission line. In this time, transmission line crews track down the fault location and the reasons. However, because of having error at the fault location of the distance relay, there is a discordance between real and obtained fault location. As this reason, the inspection time for finding fault location can be longer. In this paper, we proposed the statistical (regression) analysis method based on each type of relay's the historical fault location data and the real fault distance data to improve the problems. With finding the regression equation based on the regression analysis, and putting the relay fault location into that equation, the real fault distance is calculated. As a result of the Prediction fault location, the inspection time of transmission line can be reduced.

• Journal of Electrical Engineering and Technology
• /
• 제8권1호
• /
• pp.31-39
• /
• 2013

Proper installation of Flexible AC Transmission Systems (FACTS) devices in existing transmission networks can enable power systems to accommodate more power transfer with less network expansion cost. The problem to maximize transmission system loadability by determining optimal locations and settings for installations of two types of FACTS devices, namely static var compensator (SVC) and thyristor controlled series compensator (TCSC), is formulated as a mixed discrete-continuous nonlinear optimization problem (MDCP). For solving the MDCP, in the paper, the proposed method with fitness sharing technique involved in the updating process of the particle swarm optimization (PSO) algorithm, can diversify the particles over the search regions as much as possible, making it possible to achieve the optimal solution with a big probability. The modified IEEE-14 bus network and a practical power system are used to validate the proposed method.

• Journal of Information Processing Systems
• /
• 제13권5호
• /
• pp.1358-1371
• /
• 2017

Dynamic thermal rating (DTR) system is an effective method to improve the capacity of existing overhead line. According to the methodology based on CIGRE (International Council on Large Electric systems) standard, ampacity values under steady-state heating balance can be calculated from ambient environmental conditions. In this study, simulation analysis of relations between parameters and ampacity is described as functional dependence, which can provide an effective basis for the design and research of overhead transmission lines. The simulation of ampacity variation in different rating scales is described in this paper, which are determined from real-time meteorological data and conductor state parameters. To test the performance of DTR in different rating scales, capacity improvement and risk level are presented. And the experimental results show that the capacity of transmission line by using DTR has significant improvement, with low probability of risk. The information of this study has an important reference value to the operation management of power grid.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2009년도 추계학술대회
• /
• pp.755-757
• /
• 2009

Since the research of advanced terrestrial digital multimedia broadcasting system is still in progress, and in our previous paper, in which we introduced how to combine one conventional transmitted symbol with two additional bits to form a new symbol transmission, the bit error performance of LP bits is not realizable, because even we implemented the turbo code to protect the LP bits transmission, to obtain a certain good bit error probability, the value of $E_b/N_0$ cost highly. In this paper, we modified the composition of low-priority symbol and high-priority symbol, and through the system presented in previous paper we get a better simulation result of the LP symbol transmission.

• 한국통신학회논문지
• /
• 제37권6B호
• /
• pp.464-473
• /
• 2012

본 논문에서는 무선 네트워크에서 네트워크 코딩을 재전송에 사용했을 때 얻을 수 있는 이득을 계산했다. 먼저 무선 네트워크에서 네트워크 코딩을 재전송에 활용했을 때 얻을 수 있는 전송 실패 확률을 수학적으로 구했고 이에 따른 다이버시티 차수를 노드 숫자와 수신 확률에 따라 변함을 보였다. 전송 실패 확률을 이용하여 전송실패 확률 ${\epsilon}$을 만족시키는 ${\epsilon}$-용량 (${\epsilon}$-outage capacity) 을 구하였고, 네트워크 코딩을 사용했을 때와 안 했을 때의 ${\epsilon}$-용량의 비율을 네트워크 코딩 이득이라 정의하였다. 그리고 네트워크 코딩 이득이 다이버시티 차수의 함수로 표현됨을 보였다. 노드 숫자가 무한하게 많아지게 되면 네트워크 코딩 이득이 점근적으로 $0.25{\epsilon}^{-1}$을 달성할 수 있음을 보였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제7권9호
• /
• pp.2081-2100
• /
• 2013

In this paper, we propose a cooperative hybrid spectrum sharing protocol by jointly considering interweave (opportunistic) and underlay schemes. In the proposed protocol, secondary users can access the licensed spectrum along with the primary system. Our network scenario comprises a single primary transmitter-receiver (PTx-PRx) pair and a group of M secondary transmitter-receiver (STx-SRx) pairs within the transmission range of the primary system. Secondary transmitters are divided into two groups: active and inactive. A secondary transmitter that gets an opportunity to access the secondary spectrum is called "active". One of the idle or inactive secondary transmitters that achieves the primary request target rate $R_{PT}$ will be selected as a best decode-and-forward (DF) relay (Re) to forward the primary information when the data rate of the direct link between PTx and PRx falls below $R_{PT}$. We investigate the ergodic capacity and outage probability of the primary system with cooperative relaying and outage probability of the secondary system. Our theoretical and simulation results show that both the primary and secondary systems are able to achieve performance improvement in terms of outage probability. It is also shown that ergodic capacity and outage probability improve when the active secondary transmitter is located farther away from the PRx.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권12호
• /
• pp.5898-5916
• /
• 2018

In this paper, the downlink performance of multi-cell distributed antenna systems (DAS) with a single user in each cell is investigated. Assuming the channel state information is available at the transmitter, four transmission modes are formulated as combinations of remote antenna units (RAUs) selection and cooperative transmission, namely, non-cooperative transmission without RAU selection (NCT), cooperative transmission without RAU selection (CT), non-cooperative transmission with RAU selection (NCT_RAUS), and cooperative transmission with RAU selection (CT_RAUS). By using probability theory, the cumulative distribution function (CDF) of a user's signal to interference plus noise ratio (SINR) and the system ergodic capacity under the above four modes are determined, and their closed-form expressions are obtained. Furthermore, the system energy efficiency (EE) is studied by introducing a realistic power consumption model of DAS. An expression for determining EE is formulated, and the closed-form tradeoff relationship between spectral efficiency (SE) and EE is derived as well. Simulation results demonstrate their consistency with the theoretical analysis and reveal the factors constraining system EE, which provide a scientific basis for future design and optimization of DAS.

• 한국통신학회논문지
• /
• 제22권9호
• /
• pp.2014-2026
• /
• 1997

본 논문에서는 현재 광대역 고속네트워킹의 핵심기술인 비동기 전송방식(Asynchronous Transfer Mode: ATM)을 사용하는 통신 네트워크에서 무선채널을 이용하여 ATM 셀을 전송할 때에 비트오율 성능, 셀손실확률, 셀오류확률 및 네트워크 성능을 분석하였다. 무선 채널에서의 변조방식으로는 대역폭 효율을 높히기 위하여 16Star QAM방식을 적용하였으며, 무선 채널에서의 성능을 개선하기 위한 채널부호화 기법으로는 Reed-Solomon (R-S)부호, 길쌈부호, R-S/길쌈부호의 인쇄부호를 적용하였으며, 효과적으로 ATM셀을 전송하기 위한 UEP(unequal error protection) 부호화 방안으로 부분 연쇄부호를 제시하고 성능을 분석하였다. 이동 무선 통신채널의 특성인 도플러 영향과 라이시안 페이딩 모델을 고려하였고 수신단에서의 성능을 향상시키기 위하여 최대비 결합 방식의 다이버시티 기법을 적용하였으며, 네트워크 성능분석을 위하여는 무선 ATM셀의 셀 전송효율 및 지연시간을 분석하였다. 성능분석 결과로, 부분 연쇄부호를 적용시 기존의 부호화 기법들에 비하여 약 2dB 이상의 ATM 셀 손실 성능 향상을 기대할 수 있으며, 특별히 낮은 오류확률을 요구할 수록 좋은 성능을 보임을 알 수 있었다. 또한 동일한 성능을 얻기 위하여 적용하는 부호화 기법의 오버헤드 비트를 줄일 수 있는 방안임을 확인하였다. 따라서, 부분연쇄부호와 같이 ATM 셀의 헤더와 payload 부분의 에러 보정능력을 달리 적용하는 부호화 기법을 채택하는 것이 미래의 이동통신망에서의 무선 ATM통신을 위한 유용한 전송방식으로 생각된다.

• 한국컴퓨터정보학회논문지
• /
• 제17권12호
• /
• pp.121-129
• /
• 2012

본 논문에서는 IEEE 802.15.4에서 저속 데이터 전송률을 요구하는 응용을 운용하기 위한 WBAN 시스템 모델을 제안한다. 의료용 응용서비스는 상이한 데이터 전송률과 응급 메시지 전송을 요구하기 때문에 기존의 무선 센서 네트워크 기술을 참조할 수 없다. 이러한 기존 시스템의 문제점들을 해결하기 위하여 WBAN에 적합한 시스템 모델과 WBAN MAC 프로토콜에 관한 내용을 제안하였다. 첫째, 경쟁 구간에 우선순위 큐잉을 적용하여 MAC 명령어 프레임의 전송을 보장할 수 있는 시스템 모델을 제안하였다. 둘째, 제안한 시스템 모델을 사용하기 위해 MAC 프레임을 새롭게 정의하였다. 셋째, 경쟁구간에서 우선순위가 없는 데이터 프레임의 처리량 및 전송 성공 확률을 향상시킬 수 있는 데이터 전송률을 고려한 WBAN CSMA/CA 백오프 알고리즘을 제안하였다. 제안한 WBAN CSMA/CA 백오프 알고리즘은 BAN(Body Area Network) 및 WSN(Wireless Sensor Network)의 시뮬레이션이 가능한 OMNeT++의 Castalia를 이용하여 구현하였다. 시뮬레이션 결과 제안한 시스템 모델이 기존 방식과 비교하여 데이터 처리량이 개선되고, 충돌 확률이 감소함을 확인할 수 있었다.