• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.9
• /
• pp.2326-2333
• /
• 2009

In the adaptable bandwidth allocation technique, a transmission plan for variable rate video data is made by smoothing algorithms such as CBA algorithm and the data is sent by the transmission plan considering network traffic. But the CBA algorithm, the MCBA algorithm, MVBA algorithm and the other smoothing algorithms produce a transmission plan where the size of the increasing interval of transmission rate is generally larger than the size of the decreasing interval. And the transmission rate in CBA algorithm, the MCBA algorithm, the MVBA algorithm is changed in overflow curve during the increasing interval of transmission rate. This may cause many frames to be discarded when available transmission rate is larger than transmission rate by the transmission plan. In this paper, the smoothing algorithm, where transmission rate is changed in the middle of underflow curve and overflow curve to decrease the number of discarded frames, but the transmission rate increases at the minimum, and the CBA algorithm, the MCBA algorithm, the MVBA algorithm are applied to a transmission plan in the adaptable bandwidth allocation technique, and the minimum frame rates, the average frame rates, the variation of frame rates, and the numbers of discarded frames are compared in among algorithms.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.139-145
• /
• 2015

This paper proposes to increase the node energy effienciecy, which rapidly drops during the transmission of LEACH (Low Energy Adaptive Clustering Hierachy), using the method of DL-LEACH (Dual-hop Layered LEACH). By introducing dual-hop method in the data transmission, the proposed single-hop method for short-range transmission and multi-hop transmission method between the cluster heads for remote transmission was introduce. By introducing a partial multi-hop method in the data transmission, a single-hop method for short range transmission method between the cluster heads for remote transmission was introduces. In the proposed DL-LEACH, the energy consumption of cluster head for remote transmission reduces and increases the energy efficiency of sensor node by reducing the transmission distance and simplifying the transmission routine for short-range transmission. As compared the general LEACH, it was adapted to a wider sensor field.

• Journal of Biosystems Engineering
• /
• v.23 no.6
• /
• pp.539-548
• /
• 1998

This study was intended to develop a load spectrum acting on a transmission of agricultural tractors. Transmission loads were measured at the input shaft of the transmission and final drive shaft of the tractors. The measurement were conducted in five field conditions at two speed levels under plowing operations in Korea. Two torque transducers were developed for the respective load measurements and other necessary instrumentations were made to collect the data and store them in a data logger. The time-histories of the torque loads were analyzed and transformed into the load spectra using the rainflow counting and Smith-Watson-Topper methods. Comparisons of the load spectra developed under different conditions were made to investigate their characteristics. The effects on the load levels of soil and plowing speeds were also investigated. Finally, a load spectrum combining the results of the spectrum analysis was developed and proposed as a load source for the reliability test of transmissions.

• Journal of Advanced Navigation Technology
• /
• v.22 no.1
• /
• pp.37-42
• /
• 2018

Recently, there have been many studies on the IoT environment in which the sensors attached to the equipment automatically transmit and process the site information in real time through the network to control the equipment. The core of such a system is a network for data transmission and reception, and a wired network with wide transmission distance is a priority. However, in the case of a wired network, there is a problem that the time and cost consumed to configure the communication is higher than that of the wireless. In this paper, we propose LPWA - based wireless data transmission system using LPWA and BLE communication to solve this problem. The proposed system collects data from equipment through BLE and transmits data to the server using LPWA. Experimental results show that the spreading factor of maximum length of LPWA is 8, and the minimum length is 9.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.437-439
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission cable system Estimation of fault location is performed using data sampled at two ends of underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This travel time information is provided by the wavelet. Simulation was performed using EMTP. ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault to location in real underground transmission line.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.12
• /
• pp.608-613
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission power cable system. Estimation of fault location is performed using data smapled at two ends underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This traveling time information is provided by the wavelet. Simulation was performed using EMTP, ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault location in real underground transmission line.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.264-267
• /
• 2002

This paper proposed a effective priority selection algorithm named weighted round-robin algorithm and show the implementation result of DMAC priority selection module using prosed weighted round-robin algorithm. I parameterize timing constraints of each functional module, which decide the effectiveness of system. Proposed weighted round-robin algorithm decide the most effective module for data transmission using parameterize timing constraints and update timing parameter of each module for next transmission module selection. I implement DMAC priority selection module using this weighted round-robin algorithm and can improve the timing effective for data transmission from memory to functional module or one functional module to another functional module.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1796-1798
• /
• 2002

Speech transmission is common in many communications systems. In this paper, a technique to reduce the total bits required for expressing the speech data is proposed for the purpose of a packet transmission. A novel coding method is derived based on the concept of finding common information in sequential speech samples. Computer simulations demonstrate that the proposed scheme reduces the total bits re- quired in PCM approximately by half.

• Journal of IKEEE
• /
• v.7 no.1 s.12
• /
• pp.63-71
• /
• 2003

In this paper, we propose an DSR(Dynamic Source Routing) protocol to support QoS for reliable data transmission in the mobile ad-hoc network. The proposed algorithm uses DSR protocol to support QoS as its basic routing protocol, and uses the nodes which are between source and destination nodes as key QoS support. Because of moving nodes there is some problem that is restricted reliable data transmission. For solve this problem, source node set up the QoS link with destination node. The nodes that are located at QoS link and find out loss of transmission path save the transmitting data packets. Those search a new transmission path to destination node and transmit the saved data packet to destination node. As the result of evaluation, we found the proposed QoS network guaranteed reliable data transmission with almost 100% data reception rate for slowly moving mobile ad-hoc network and with more 96% data reception rate, which is improvement of 3.7737% reception rate compared with none QoS network, for continuously fast moving mobile ad-hoc network.

• Journal of KIISE:Information Networking
• /
• v.29 no.2
• /
• pp.156-164
• /
• 2002

IPSec is a protocol which provides data encryption, message authentication and data integrity on public and open network transmission. In IPSec, ESP protocol is used when it needs to provide data encryption, authentication and Integrity In real transmission packets. ESP protocol uses DES-CBC encryption mode when sender encrypts packets and receiver decrypts data through this mode IV is used at that time. This value has many tasks of attack during transmission by attacker because it is transferred clean and opened. If IV value is modified, then decryption of ESP data is impossible and higher level information is changed. In this paper we propose a new algorithm that it encrypts IV values using DES-ECB mode for preventing IV attack and checks integrity of whole ESP data using message authentication function. Therefore, we will protect attacks of IV and data, and guarantee core safe transmission on the public network.