• Journal of Korea Multimedia Society
• /
• v.10 no.6
• /
• pp.745-753
• /
• 2007

The wireless medium is known to be time-varying which could affect and result to a poor network's performance. As a solution, an opportunistic scheduling and power control algorithm based on IEEE 802.11 MAC protocol is proposed in this paper. The algorithm opportunistically exploits the channel condition for better network performance. Convex optimization problems were also formulated i.e. the overall transmission power of the system is minimized and the "net-utility" of he system is maximized. We have proven that an optimal transmission power vector may exist, satisfying the maximum power and SINR constraints at all receivers, thereby minimizing overall transmission power and maximizing net-utility of the system.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.11
• /
• pp.532-537
• /
• 2006

Lightning induced faults accounts for more than 66% at the transmission lines of KEPCO. The lightning causes damages to power system equipments including transmission line, the blackout of electricity and the electro-magnetic interference. Because of this reason, we need the real time lightning information for the optimal operation of power system. And, it is required to obtain and accumulate the lightning current parameters for the insulation design. In 2005, KEPRI constructed a lightning detection network, the KLDNet (i.e. Kepco Lightning Detection & Information System) and launched a lightning information service for KEPCO customers. It is intended to provide data service on the operation of transmission lines and collect lightning-related data, which is the most important factor regulating power system design and operation. The new system will replace LPATS, the old detection system, which has been operating since 1995 and is rapidly failing in terms of both detection performance and location accuracy. The purpose of this paper is to explain the work performed and the results of that work in performing a site survey of several locations. The purpose of the site survey is to find locations acceptable for the installation of a lightning location receiver in support of a Lightning detection system(LDS). A restriction was placed on the surveyed locations, as they must belong to the Korea Electric Power Company. This requirement was made to facilitate the communication needs of the LDS network. Total of 15 sites were evaluated as possible LDS sensor sites. Some of the sites were rejected for physical reasons and therefore no electrical testing was performed. Of the 15 sites, total of 10 sites were considered acceptable and 5 sites were rejected for various reason. In this paper, we would like to explain the site survey and detection efficiency for LDS.

• Fire Science and Engineering
• /
• v.20 no.1 s.61
• /
• pp.23-27
• /
• 2006

With the development of the today's advanced industry civilization, We are always inhering a safety frigidity about disasters of various kinds when and where we may happen. The fires and disasters to be enlarged day by day are reported everyday through the mass communication. Therefore, a prevention countermeasure about the every kind fire and disaster is above all important along the social and the days requirement. As a kind of such countermeasure, this paper is proposed about automatic transmission system of disasters alarm by using wire and wireless communication network. The automatic transmission system prevents the unexpected fire or disaster from a sudden occurrence at the house, industrial field or at the place without the human. The proposed system has the characteristic of high precision and high response speed comparing with conventional system. Also, as the proposed system is small size and lightweight, the users have economic advantage and simply install the system.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2680-2696
• /
• 2018

The collaborative content caching system is an effective solution developed in recent years to reduce transmission delay and network traffic. In order to decrease the service end-to-end transmission delay for future 5G ultra-dense networks (UDN), this paper proposes a novel service migration method that can guarantee the continuity of service and simultaneously reduce the traffic flow in the network. In this paper, we propose a service migration optimization model that minimizes the cumulative transmission delay within the constraints of quality of service (QoS) guarantee and network condition. Subsequently, we propose an improved firefly algorithm to solve this optimization problem. Simulation results show that compared to traditional collaborative content caching schemes, the proposed algorithm can significantly decrease transmission delay and network traffic flow.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.2
• /
• pp.193-200
• /
• 2018

Owing to the development in information and communications technologies have improved the technology for high-speed transmission of massive data, which has changed closed-circuit television (CCTV) video transmission technology. In particular, digitization of the CCTV video format and streaming technology has made it possible to minimize transmission loss and integrate video transmission and camera control(pan/tilt). It has also become possible to provide additional services like remote emergency warning broadcasting with just Internet Protocol (IP). However, because of the structural problems of IP, these changes have also brought about the threat of hacking of CCTV monitoring systems. In this study, we propose a methode to optimize network management by examining cases of enhancement of operational efficiency and security by improving the structure of CCTV monitoring network.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.894-897
• /
• 2008

This paper analyzes the throughput performance of a selective repeat (SR)/automatic repeat request (ARQ) scheme to transmit packet data in burst home network channel. To combat the high degree of error caused by transmission of home network data a robust error control scheme is a necessity. Basically, error control schemes can be divided in two categories: ARQ schemes and forward error correction (FEC) schemes. ARQ schemes are often used for reliable data transmission. The performance of packet transmission using SR-ARQ schemes for bursty channels is analyzed and simple analytical expressions of its throughput are presented. Theoretic analysis and numerical results indicate that a small number of packet sizes can get good performance in bursty home network channel.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.632-634
• /
• 2005

Korea takes part in overseas business by use of accumulated advanced technology through construction of the worlds first 765kV double circuit transmission system designed with pure local technology. 'Development Study on the Power System Network Analysis in Myanmar' was received in the year 2001 and was completed in the year 2002. The following project,'Feasibility Study and Basic Designs for the 500kV Transmission System in Myanmar' has been in progress since January, 2004. With regards to this project the master plan for the Myanmar long term power system was submitted in January 2005, and now the basic designs for the 500kV transmission system construction are in progress. Technical data for the design of the transmission line is calculated using a very complex numerical formula that is almost impossible to be completed by hand. So the transmission technical calculation system was developed to calculate and support Myanmar technical data for the design of transmission line with respect to factors such as wind prossure load, tower design data conductor design data and insulator design data on the basis of weather conditions for the Myamar transmission line design area of the Myanmar 500kV trans- mission line construction basic design.

• Journal of Internet Computing and Services
• /
• v.16 no.5
• /
• pp.11-17
• /
• 2015

In the general transmission power control model that is used for wearable sensor systems, if RSSI value gets out of the Target RSSI Margin, then the sink node finds new transmission power by using TPC(Transmission Power Control) Algorithm. At this time, the sink node sends the control packet to the sensor node for delivering the newly calculated transmission power. However, when the wireless network channel condition is poor, even it is consuming a lot of control packets, the sink node could not find an appropriate transmission power so it only waste of energy. Therefore, we proposed a new control packet transmission decision method that the sink node changes the transmission power when the wireless network channel condition is stabilized. It makes waste of energy decline. In this paper, we apply control packet transmission decision method to Binary TPC algorithms and analyze the results to evaluate the proposed method. We propose three methods that judge the state of wireless network channel. We experiment that methods and analysis the results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1420-1423
• /
• 1996

This paper presents the implementation of network for automation using fieldbus. The RS-485 and twisted pair are used in layer 1 and medium, respectively. We implement FDL(Fieldbus Datalink Layer) using C-language and use token-bus network. The network consists of polling system and token passing system. The amount of transmitted data frames is evaluated with various transmission speeds that affect the system stability.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.2
• /
• pp.38-44
• /
• 2013

In this paper, we designed and implemented a mobile video transmission device with 1080i resolution and 30fps frame rate using wireless multi-access technologies. The video acquisition delay time of 16us and jitter of 21ms for this equipment were obtained, respectively. The device is designed to access various communication networks. In order to evaluate the performance of its video transmission capability, a server and monitoring viewer are implemented. In the performance test using LTE network, 211ms delay time was obtained at 3Mbps transmission. Rendering of 1fps frame rate at the 265kbps transmission was confirmed for the transmission test using Inmarsat network.